• Journal of Biosystems Engineering
• /
• 제31권5호
• /
• pp.443-448
• /
• 2006

For development of an on-line monitoring unit of fermentation process, an auto dilution unit based on traditional chemical and biological analytical method was developed and the performance was evaluated. The dilution unit was constructed with two syringe pumps and flow direction change valves and fully automated. Total delivery volume of two pumps using distilled water was measured to confirm the operating stability And diluted concentrations of three substrate solutions (glucose, lactic acid, ethanol) were compared with a standard method with a high performance liquid chromatograph (glucose, lactic acid) and gas chromatograph (ethanol). Relative error values of total delivery volume of the pumps were below 3% and standard deviation values were 0.003 (n=5). Relative error values of diluted concentration of the dilution unit measurements were below 2% with 1/10 of dilution ratio and 70, $80{\mu}{\ell}$ of sample volume conditions for glucose and lactic acid, 1/30 of dilution ratio and $70{\mu}{\ell}$ of sample volume conditions for ethanol, respectively. In case of the ethanol, cause of the evaporative characteristics, the relative error values showed over 5% whole experimental conditions.

• 아태비즈니스연구
• /
• 제10권2호
• /
• pp.13-26
• /
• 2019

This paper aims to empirically examine the short-run and long-run aggregate demand for the US imports using quarterly economic data for the period 2000-2018 including aggregate imports, final expenditure components, gross fixed capital formation and relative price of imports. According to the results of both multivariate co-integration analysis and error correction model, the above variables are all cointegrated and significant differences are found to exist among the long-run partial elasticities of imports as regards different macro components of final expenditure. Partial elasticities with respect to government expenditure, gross fixed capital formation, exports and relative price of import are found to be positive while imports seems to respond negatively to changes in private consumption, implying that an increase in private consumption could result in a significant reduction in demand for imports in the long run. With regard to the relative import prices, the results appear to indicate a relatively insignificant influence on the aggregate imports in the US in the long run. However, an error correction model designed for predicting the short-term variability shows that only exports have an impact on the imports in the short run.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1508-1515
• /
• 1996

The method of utilizing sensitivity linkages for the analysis of mechanical errors are proposed. As sources of the mechanical error, tolerances in the link length and clearances in thejoints are considered. It is demonstrated that the problem of calculating mechanical errors of a 4-bar mechanism can be transformed into a problem of conventeional velocity analysis of a sensitivity linkage. As a result of the present study, it is found and proved that the mechanical error of the output angle in the 4-Bar mechaism is represented as a simple harmonic function with respect to the relative position of the pin on the clearance circle. Also the vector representing the mechanical error of a coupler point makes, in general, an ellipse as the relative angle varies on the clearance circle. With these results we can better identify the characteristic of the mechanical errors in linkages.

• Journal of Communications and Networks
• /
• 제5권3호
• /
• pp.187-196
• /
• 2003

We consider the use of error control coding in direct sequence-code-division multiple access (OS-COMA) systems that employ multiuser detection (MUO) and space diversity. The relative performance gain between Reed-Solomon (RS) code and convolutional code (CC) is well known in [1] for the single user, additive white Gaussian noise (AWGN) channel. In this case, RS codes outperform CC's at high signal-to-noise ratios. We find that this is not the case for the multiuser interference channel mentioned above. For useful error rates, we find that soft-decision CC's to be uniformly better than RS codes when used with DS-COMA modulation in multiuser space-time channels. In our development, we use the Gaussian approximation on the interference to determine performance error bounds for systems with low number of users. Then, we check their accuracy in error rate estimation via system's simulation. These performance bounds will in turn allow us to consider a large number of users where we can estimate the gain in user-capacity due to channel coding. Lastly, the use of turbo codes is considered where it is shown that they offer a coding gain of 2.5 dB relative to soft-decision CC.

• 한국멀티미디어학회논문지
• /
• 제17권9호
• /
• pp.1092-1097
• /
• 2014

It is difficult to perform automatic formation flight of UAV (Unmanned Aerial vehicle) when GPS (Global Positionig System) is out of order or has a system error, since the relative position estimation in the flight group is impossible in that case. In this paper, we design a relative localization system for the automatic formation flight of UAV. For this purpose, we adopt digital beam forming (DBF) to estimate the angle with the central controller of the flight group and Particle Filtering scheme to compensate the estimation error of ToA (time of arrival) method. Computer simulation results present a proper distance between the central controller and a following unit to maintain the automatic formation flight.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.410-413
• /
• 2005

There are technical requirements to manufacture large size functional parts with not only simple geometries like a flat or spherical surface but also sculptured geometries. In addition, the required machining accuracy for these parts is becoming more severe day-by-day. In general, the forms of machined parts are determined by relative position between the workpiece and the tool during cutting. To improve machining accuracy, the relative position error should be maintained within the required accuracy. This study deals with estimation and calibration of depth of cut using AE signal in micro-machining.

• 한국통신학회논문지
• /
• 제40권9호
• /
• pp.1846-1855
• /
• 2015

본 논문에서는 저비용 단일 GNSS(Global Navigation Satellite System) 수신기를 이용하여 정밀한 위치를 추정하는 방법으로 반송파 위상 TD(Time Differenced) 측정치를 이용한 상대위치 결정기법을 제안하고 성능을 분석하였다. 제안하는 상대위치 결정기법은 반송파 위상 측정치를 활용하지만 시각 간 차분을 사용하므로 하나의 GNSS 수신기로 동작하며, 미지정수 결정 문제를 고려하지 않아도 된다. 또한 차분 간격이 짧은 시간일 경우 공간적 공통오차 및 위성시계 오차를 효율적으로 제거할 수 있다. 제안하는 위치결정 알고리즘은 오차해석을 통해 코드측정치를 이용한 절대위치 결정기법보다 성능이 우수함을 증명하고 실차 실험으로 구현된 알고리즘 및 오차해석 결과를 검증하였다. 그 결과, 위치추정 성능은 약 10분 동안 3m이내에 수렴하여 코드기반의 절대위치기법에 비하여 약 4배 이상 향상된 정확도 및 정밀도를 확인할 수 있었다.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.867-872
• /
• 2009

Peak expiratory flow rate(PEF) is one of the most important diagnostic parameters in spirometry. PEF occurs in a very short duration during the forced expiratory maneuver, which could lead to measurement error due to non-ideal dynamic characteristic of the transducer. In such case the initial slope of the flow rate signal determines the accuracy of the measured PEF. The present study considered this initial slope as a parameter to compensate PEF. The 26 standard flow rate signals recommended by the American Thoracic Society(ATS) were flown through the air flow transducer followed by simultaneous measurements of PEF and maximum transducer output$(N_{PEF})$. $N_{PEF}$-PEF satisfied a quadratic equation in general, however, two signals (ATS #2 and #26) having large initial slopes deviated from the fitting equation to a significant degree. The relative error was found to be in a linear relationship with the initial slope, thus, $N_{PEF}$ was appropriately compensated to provide accurate PEF with mean relative error less than only 1%. The 99% confidence interval of the mean relative error was less than a half of the error limit of 5% recommended by ATS. Therefore, PEF can be very accurately determined by compensating the transducer output based on the initial slope, which should be a useful technique for air flow transducer calibration.

• 대한임베디드공학회논문지
• /
• 제15권5호
• /
• pp.235-242
• /
• 2020

This paper analyzes the effect of reduced output width of the truncated logarithmic multiplication and application to inferences using convolutional neural networks (CNNs). For small hardware overhead, output width is reduced in the truncated Mitchell multiplier, so that fractional bits in multiplication output are minimized in error-resilient applications. This analysis shows that when reducing output width in the truncated Mitchell multiplier, even though worst-case relative error increases, average relative error can be kept small. When adopting 8 fractional bits in multiplication output in the evaluations, there is no significant performance degradation in target CNNs compared to existing exact and original Mitchell multipliers.

• Bulletin of the Korean Chemical Society
• /
• 제30권4호
• /
• pp.794-796
• /
• 2009

We have studied the structures and stabilities of Au6 to explore the origin of the large discrepancy between relative energies obtained from the density functional theory (DFT) and ab initio correlated levels of theory. The MP2 methods significantly overestimate the stability of the non-planar isomer when the double-$\zeta$ polarization quality of basis sets, such as LANL2DZ+1f and CEP31G+1f, are used. However, we show that such preference for the non-planar structure at the MP2 level mainly originates from the large basis set superposition error.