• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.191-197
• /
• 2018

This study investigated the influence of starch extraction (ST-EX) solutions on the extraction yield and characteristics of Chinese yam (CY) starches from domestic Dioscorea batatas. Ascorbic acid (VitC), $Na_2S_2O_3$, $NaHCO_3$, and $Na_2CO_3$ were used as ST-EX solutions (0.4%, w/v). The extracted CY starches were examined for ST-EX yield, chemical composition, size distribution, X-ray diffraction, solubility, swelling power, gelatinization, and pasting viscosity. The highest ST-EX yield was obtained from $NaHCO_3$, followed by VitC. Lower protein content, relative crystallinity, and gelatinization enthalpy were found in CY starches from alkaline ST-EX solutions ($NaHCO_3$ and $Na_2CO_3$). Size distribution and gelatinization temperature did not generally differ for CY starches from the different ST-EX solutions. Pasting viscosities increased in the order from $Na_2CO_3$ > $Na_2S_2O_3$ > $NaHCO_3$ > VitC ST-EX solutions. Thus, VitC may be most appropriate to extract CY starch from Dioscorea rhizomes, considering its ST-EX yield, total starch content, and variation in pasting viscosity.

• Korean journal of food and cookery science
• /
• v.31 no.3
• /
• pp.304-317
• /
• 2015

For the production of pumpkin paste with respect to heating conditions, we steamed the pumpkin for roughly 15 min, heated it with high pressure treatment for 0 min (A), 10 min (B), 20 min (C), 40 min (D), and subsequently investigated the quality characteristics. Generally a significant difference was observed between the pumpkin paste treated with and without high-pressure heat. The values of water content, crude protein and crude fiber of the high-pressure heat-treated groups B, C, D were decreased compared with untreated group A. The soluble fiber in experimental group B sweet-pumpkin paste treated with high-pressure heat for 20 min was higher than the control, and the highest value at 2.02. Experimental group D sweet-pumpkin paste treated with high-pressure heat for 40 min was found to have a decreased soluble fiber content relative to the control. The L value for the color of the group A untreated control sweet-pumpkin paste (no high-pressure heating) decreased as the time increased from 10 min to 40 min, with L values of 50.33, 49.46, and 48.06, respectively. The b value for the color of the sweet-pumpkin paste also decreased, showing a significant difference. Taking into account all the results, we chose experimental group B in order to prepare sweet-pumpkin latte. We used 0.2% gum (xanthan gum, locust bean gum, guar gum) as a stabilizer. Sweet-pumpkin latte with xanthan and locust bean gum has a suspension stability effect that lasts 90 min. The L and b values of sweet-pumpkin latte with gums increase and a value decrease compared with the control. In terms of the overall acceptance of the sweet-pumpkin latte, the experimental group with xanthan gum scored the best.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.53-59
• /
• 2007

This study was conducted to determine the effects of dietary supplementation with probiotics on the growth and meat quality of finishing pigs. A total of forty eight ($Landrace{\times}Yorkshire{\times}Duroc$) pigs ($55.3{\pm}1.5 kg$ average initial body weight) were randomly assigned to four groups and fed on a diet supplemented with 0, 0.2, 0.5 or 1% probiotics for 58 days. The pigs were slaughtered at approximately 105 kg live weight. Supplementation with 0.2% probiotics significantly (p<0.05) increased daily gain compared to the control. The daily gain of pigs in the 0.2% probiotic group was 0.95 kg whereas that of the control was 0.85 kg. The average feed intake was 2.79-2.84 kg and there were no significant differences in feed intake between the control and test groups. The feed conversion of the 0.2% probiotic group was 2.96 kg whereas the control showed a feed conversion of 3.28 kg. The results of this study imply that supplementation with 0.2% probiotics may improve the feed conversion of pigs. There were significant differences in carcass weight, carcass ratio, backfat thickness, and frequency percentage of A grade carcasses between the control and probiotic test groups. In addition, the moisture, crude protein and crude ash contents of the probiotic treated groups did not differ significantly from the control group, however the crude fat values of the 0.2% probiotic test group was significantly tower than the other groups. The muscle pH levels of all samples ranged from 5.63-5.67 which is the normal pH of pork. The supplementation of probiotics resulted in decreased lightness ($L^*$) values and increased redness ($a^*$) values. Furthermore, the saturated fatty acid contents of the 0.2% and 0.5% probiotic test groups decreased and the unsaturated fatty acid contents increased relative to the control.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.168-177
• /
• 2009

This study was conducted to investigate the dietary effects of locally grown herbs (Mentha piperascens, PM; Rubus coreanus, RC; Tagetes patula, MG) on the growth performance and meat quality of broiler chicken. A total of 600 1-d-old Ross male broiler chicks were divided into eight groups and were fed control diets (antibiotics-medicated or non-medicated commercial diets) or experimental diets (non-medicated diets containing 0.3 or 0.5% PM, 0.3 or 0.5% RC, or 0.3 or 0.5% MG) for 5wk. The body weight gains and feed conversion rates (FCRs) in all the groups that were fed diets containing PM, RC, or MG were significantly improved compared to those in the non-medicated control group (p<0.05). The relative weights of various organs, the serum cholesterol levels, and the GOT/GPT activities in all the groups were also not significantly different. The superoxide dismutase (SOD)-like activities in the groups that were fed diets containing 0.3% PM or 0.3% MG were significantly increased compared to those in the non-medicated control group (p<0.05). The number of cecal lactic-acid bacteria in the groups that were fed diets containing 0.3% PM or 0.5% RC tended to increase. The malondialdehyde contents in the leg muscles were significantly lowered by feeding with PM or MG (p<0.05). The physicochemical properties of the edible meat, including the shear force, water-holding capacity, heat loss, pH, and muscle color degrees $(CIEL^*.\;a^*.\;b^*)$, were not affected by the dietary treatments. It has been suggested that spontaneous Korean plants promote the growth of broilers and may delay lipid oxidation in edible muscles without any negative effect when added in broiler diets.

• Korean Journal of Poultry Science
• /
• v.39 no.3
• /
• pp.195-205
• /
• 2012

The objective of this study was to evaluate the effects of different levels of dietary ME on growth performance and carcass characteristics in two different strains of broiler chicken. A total of one thousand, 1-day-old A strain and R strain male chicks were randomly assigned into 8 treatments in a $2{\times}4$ factorial arrangement. They were fed iso-nitrogenic (CP 21%) crumbled diets formulated to contain metabolizable energy (ME) 2,950 to 3,250 kcal/kg in increment of 100 kcal/kg in the starter phase (1 to 21d) and iso-nitrogenic (CP 19%) pelleted diets containing same ME levels as in the finishing phase (22 to 38d). The body weight (BW) gain of chicks fed the lower ME diets (2,950 or 3,050 kcal/kg) were higher than those of the higher ME groups. The dietary energy level showed significant effects on feed intake and feed conversion rate (FCR) from 1 to 38 days of age (p<0.05). With the increment of dietary energy, feed intake tended to be reduced, whereas FCR was improved in the two strains of broiler chickens. The lowest FCR was observed at 3,250 kcal/kg diet groups in both of the two strains from 1 to 38 days of age. Feed intake and BW gain during 38 days were significantly affected by the strain factor. Increasing dietary energy up to 3,250 kcal/kg had no effect on the relative weights of breast meat and abdominal fat. The dietary energy and strains showed significant effects on the dressing percentage. There were no significant differences in various blood profiles except for GPT activity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.2
• /
• pp.117-127
• /
• 1982

Mulberry plants (Morus alba L.) were grown in pots with the following different nitrogen sources: ammonium sulphate, urea, ammonium nitrate, sodium nitrate + ammonium nitrate ($NO_3:NH_4$=2:1), and sodium nitrate. The effects of the nitrogen sources on mulberry yields, nitrogen recovery, distribution of ions and cation-anion balance (C-A) along leaf sequence and growth stage were investigated. The results were as follows: 1. Leaf yields and nitrogen recovery decreased with increasing $NO_3$-N application rates. 2. Relative cation contents in leaves in the early growth stages showed the following pattern : Na < Mg < Ca < K. However, the order of Ca and K reversed in the later stages. The order of anion contents chifted from $SO_4$ < $NO_3$ < Cl < $H_2PO_4$ in the early stages to $NO_3$ < Cl < $SO_4$ < $H_2PO_4$ in the later stages. 3. Contents of K, $H_2PO_4$, $SO_4$, $NO_3$, T-N and the sum of anion contents (${\sum}A$) were higher in upper leaves whereas Ca, Mg, Cl, the sum of cation contents (${\sum}C$) and (C-A) were higher in lower leaves. 4. When $NO_3$ in leaves decreased, Cl and K as counter-cations increased and consequently Ca decreased. 5. The (C-A) in leaves varied with leaf sequence and growth stage from 700 to 900 me/kg D.M.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.285-299
• /
• 1987

Timing and placement of fertilizer applications are two managerial means to improve the fertilizer use efficiency. The relative importance of these two means is determined by the application rate. With the realistic rate of N application recommended to the small farmers in the tropics, at present and in the near future, basal application in right manner, seems to be more important than split application at different times. In wetland rice soils, deep placement by whatever available means is desirable. But in the situations where perfect deep placement is very difficult to implement, the whole-layer application may be worth trying, until better methods become available. In rainfed uplands, N fertilizer application plans should be contingent upon the amount and distribution of rainfall: apply a less risky rate as subsurface banding near the crop rows to start with; then, depending upon the rainfall prospects in the season, apply or omit the additional dose. Because the patterns of crop response to N fertilizer can be significantly different between the research farms and farmers' fields, it seems imperative to have information on the patterns of crop response to N under farmers' management conditions, for the development of realistic fertilizer application recommendations. To enable the farmers to adopt improved fertilizer application technologies, it is essential to develop and make available to farmers convenient fertilizer applicators. Past experience with the improved fertilizer use technologies indicates that, in the long run, the development of fertilizers that are not only effective and convenient for farmers to use but also easy to produce without major modifications of existing fertilizer production systems is the ultimate solution to the problem of low N fertilizer use efficiency.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.3
• /
• pp.312-317
• /
• 1985

Growth response and nutrients uptake of tobacco grown on mulched and non mulched plots were investigated during the growing period. 1. The whole growing time was about 25 days shorter and relative growth rate was faster in the mulched plot than in the non mulched plot. 2. Nitrate content of leaf in the latter stage of tobacco grown on the non mulched plot was more continuously increased compared with mulched plot. As a result in the latter stage of tobacco leaf nitrate form of nitrogen level was much higher on non mulched plot than on mulched plot. 3. Reducing sugar content in cured leaves of tobacco grown on the non mulched plot was lower that of the mulched plot. This difference in reducing sugar content was remarkable in the bottom leaves that nitrate content was highest. 4. Tobacco growing on nonmulched soil may cause to be low quality owing to increasing of nitrogen compound and decreasing of reducing sugar content in cured leaves. 5. As distributions of nitrate and potassium content in leaves at different stalk position was similar each other, nitrate and potassium ion considered to be counter ion in absorption and translocation through the tobacco plant.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.19 no.1
• /
• pp.4323-4337
• /
• 1977

The study was to estimate the effect of the rise of water temperature in the warm water pool and to make contribution to the establishment of reducing to a damage of cool water as well as to the planning for warm water pool. This observation was performed in Wudu warm water pool located at Wudu-Dong of Chuncheon for two years from 1975 to 1976. The results were showed as follows; 1. The daily variation of water temperature was the least for inset (No.1; 0.6$^{\circ}C$) the second for middle overflow (No2: 3$^{\circ}C$, No.3; 2.3$^{\circ}C$) and another for outflet (No.4; 3.6$^{\circ}C$, No.5; 3.8$^{\circ}C$) And the highest reaching time of water temperature in each block was later about 1 hour than the time at which air temperature happend in the daytime. So, the variation of water temperature was sensitive to the variation of air temperature 2. The monthly variation of water temperature at each measuring point was plotted to be increased with increase in air temperature till August (Mean monthly rising degree; No.1; 1.15$^{\circ}C$, No.2; 1.7$^{\circ}C$, No.3; 1.73$^{\circ}C$, No.4; 2.08$^{\circ}C$, No.5; 2.0$^{\circ}C$), and expressed gradually descended influence upon water temperature after August. 3. The mean temperature of inflow folwed in warm Water pool was 7.5∼12.5$^{\circ}C$, and outflow temperature was described as 13.4∼22.5$^{\circ}C$ to be climbed. And So, the rising interval of water temperature was shown as 6.7∼10.4$^{\circ}C$. 4. The correlation between the rising of water temperature and the weather condition was found out highly significant. As the result, their correlation coefficents of water temperature depending on mean air temperature, ground temperature, wind velocity and relative humidity were to be 0.93, 0.90, - 0.83 and 0.71 respectively. But there was no confrimation of the correlation on the clouds, sunlight time, volume of evaporation, and heat capacity of horizontal place. 5. The water temperature of balance during the period of rice growing in Chuncheon district was shown as table 10, and the mean of whole period was calculated as about 23.7$^{\circ}C$. 6. The observed value of the outflow temperature passed through the warm water pool was higher than that of computed, the mean difference between two value was marked as 1.15$^{\circ}C$ for blockl, 1.18$^{\circ}C$ for block2, and 0.47$^{\circ}C$ for block3, respectivly. Therefore, the ratio on the rising degree between the observed and computed were shown as 53%, 44%, and 18%, mean 38% through each block warm water pool (referring item $\circled9$ of table 11,12, and 13). Accordingly, formula (4) in order to fit for each block warm water pool was transfromed as follow; {{{{ { theta }_{w } - { theta }_{ 0} =[1-exp LEFT { { 1-(1+2 varphi )} over {cp } CDOT { A} over { q} RIGHT } ] TIMES ( { theta }_{w } - { theta }_{ 0}) TIMES C }}}} Here, correction coefficinent was computed 1.38, and being substituted 1.38 for C in preceding formula, the expected water temperature will be calculated to be able to irrigate the rice paddy. As the result, we can apply the coefficient in order to plan and to construct a new warm water pool.