• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.465-472
• /
• 1998

In this study short gain rough rice(Chu-cheong) with initial moisture content of around 12%(w.b.) was exposed to 3 levels of relative humidity(70, 80 and 90%) and 3 levels of temperature(20, 25 and 3$0^{\circ}C$) of the air, in order to evaluate the adsorption characteristics of rough rice and the rate of cracked kernels which will serve as the basic data when developing the quality adjusting equipment. The result showed that the moisture content of rough rice increased rapidly during the early stages of moisture adsorption like other grains, and at least 70% of the adsorption occurred within the first 24 hours of exposure to the humid environment. Adsorption rate was more related to relative humidity than the temperature of air stream, and the higher the relative humidity, the higher the adsorption rate. And the Page's equation predicted best the adsorption process of this study. Experimental results for the crack generation during the adsorption process showed that the higher the relative humidity the more the cracked kernels, and that the temperature had little effect. An empirical equation was developed to predict the crack ratio for the conditions of this study, and Nishiyama model predicted better the crack generation than Hoerl model.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.121-127
• /
• 2020

The analysis method of relative adsorption of disperse dyes on impregnated polyurethane resin and polyester fiber separately was investigated. The solvents for extracting the dyes from polyurethane resin and polyester fiber were determined by acetone and DMF, respectively. By extracting the dyed fibers with acetone at room temperature within 30 minutes, the dyes adsorbed only on the polyurethane resin could be extracted. And then by additional extracting the same fabrics with DMF at 95℃ for longer than 1 hour, the dyes adsorbed on polyester fabrics was extracted. This means that the dyes adsorbed on polyurethane and polyester could be extracted separately and that relative adsorption of the dyes on the both components could be analyzed quantitatively. Using this analysis method, the relative adsorption of a disperse dye was investigated after reduction clearing with various conditions.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.1
• /
• pp.97-102
• /
• 1999

This study was carried out view that reuse of sludge of adsorbent for benzene in carbonized cast compare with activated carbon. Not only the carbonized cast is good than carbonized carbon in cation exchange capacity and 12 adsorption capacity, but also benzene adsorption capacity is no differences compare to activated carbon. As results, benzene adsorption capacity of carbonized cast and activated carbon are decreased as temperature increase($25~70^{\circ}C$).It is compatible in Lamgmuir model. Therefore, carbonized cast is applied general adsorbent. From experimental results and data regression, in model concerning effect of temperature, relative errors between the experimental data and those calculated by the model are within the range of 1.2~7.8%. In relative humidity effect (RH 0.25~0.50) of benzene adsorption, modified Freundlich model : $QB_{enzene}{;\}QB_{enzene},{\}_{RH=0}=1-kRH^{IN}$, relative errors between the experimental data and those calculated by the model are within are range of 0.5-5.1%. The constants k and l/n in equation were found to be 1.25, 1.89 in carbonized cast.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.12
• /
• pp.1070-1077
• /
• 2003

This study was undertaken to judge the quality of air-tightened exhibition cases and to predict the dynamic variation of the relative humidity in the showcase. We performed a lot of experiments for the a few conditions and we numerically calculated the air change rate and the relative humidity in the showcase with the Artsorb under the same conditions. In all cases we confirmed that the numerical results about the relative humidity in the showcase had a good agreement with the experimental ones. Through the experiments of humidity control, we found out that the adsorption efficiency is varied with the location and the amount of the Artsorb. And the numerical results showed that the adsorption material is always needed to keep on the appropriate humidity condition in the showcase even though any kind of the showcases are used.

• Journal of Biosystems Engineering
• /
• v.30 no.2 s.109
• /
• pp.95-101
• /
• 2005

Adsorption and desorption experiments were carried out on rough rice and brown rice (Nampyung) at 5, 15, 25, 35, $45^{\circ}C$ for moisture contents between 8.7 and $25\%$ (db). The method employed was to measure the equilibrium relative humidity (ERH) of air in contact with the grain under static conditions, using an electronic hygrometer The effects of temperature and moisture contents were investigated, and the measured values were fitted to the modified Henderson, the modified Chung-Pfost, the modified Halsey and the modified Oswin model. The ERHs of rough rice and brown rice decreased with an decrease in moisture content and temperature, and the effects of temperature was no significant at moisture content of $25\%$ (db). Equilibrium moisture content (EMC) of brown rice was higher than rough rice at same temperature and relative humidity. Desorption EMC is higher than the adsorption, but there is no significant difference between desorption and adsorption EMC in moisture content near $25\%$ (db) at rough rice and near 9, 21 and $25\%$ (db) at brown rice. The modified Oswin model was the best in describing the adsorption EMC and the modified Chung-Pfost model was the best in describing the adsorption ERH of rough rice. The modified Oswin model was the best in describing the adsorption EMC/ERH of brown rice. The modified Chung-Pfost model was the best in describing the desorption EMC/ERH of rough rice and brown rice.

• Tribology and Lubricants
• /
• v.19 no.5
• /
• pp.245-250
• /
• 2003

Water is known to playa crucial role on friction of moving parts in nanoscale contact. Little is, however, known about the tribological behavior of a solid surface that is covered with water adsorption layer. The objective of this study is to investigate the nanotribological behavior of the water layer in relation to water affinity of the surface and relative humidity. This paper presents an examination of the frictional behavior of water adsorption layer as 'confined liquid film'. It is shown that the friction is inversely proportional to the hydrophilicity of surface and relative humidity. On the other hand, friction of hydrophobic surface is not influenced by relative humidity. A model is proposed for the water-mediated contact in which it is shown that the water layer between two hydrophilic surfaces with high relative humidity behaves as a lubricant.

• Food Science and Preservation
• /
• v.24 no.4
• /
• pp.505-509
• /
• 2017

Water vapor adsorption kinetics of vacuum-dried jujube powder were investigated in temperature and relative humidity ranges of 10 to $40^{\circ}C$ and 32 to 75%, respectively. Water vapor was initially adsorbed rapidly and then reached equilibrium condition slowly. Reaction rate constant for water vapor adsorption of vacuum-dried jujube powder increased with an increase in temperature. The temperature dependency of water activity followed the Clausius-Clapeyron equation. The net isosteric heat of sorption increased with an increase in water activity. Good straight lines were obtained with plotting of $1/(m-m_0)$ vs. 1/t. It was found that water vapor adsorption kinetics of vacuum-dried jujube powder was accurately described by a simple empirical model, and temperature dependency of the reaction rate constant followed the Arrhenius-type equation. The activation energy ranged from 50.90 to 56.00 kJ/mol depending on relative humidity. Arrhenius kinetic parameters ($E_a$ and $k_0$) for water vapor adsorption by vacuum-dried jujube powder showed an effect between the parameters with the isokinetic temperature of 302.51 K. The information on water vapor adsorption kinetics of vacuum-dried jujube powder can be used to establish the optimum condition for storage and processing of jujube.

• Journal of the Mineralogical Society of Korea
• /
• v.9 no.1
• /
• pp.17-25
• /
• 1996

Usual experimental adsorption isotherms as a function of relative humidity were constructed from adsorbed water contents in soils, which were kept more than 2 days in vacuum desiccators with constant humidities controlled by sulfuric acids of various concentrations. From the experimental data, the adsorption surface areas were calculated on the basis of the existing adsorption theory, such as Langmuir, BET, and Aranovich. Based on the Gibbs function describing chemical potential of perfect gas, the relative humidities in the desiccators were transformed into their chemical potentials, which were assumed to be the same as the potentials of equilibratedly adsorbed water in soils. Moreover, the water potentials were again transformed into the equivalent capillary pressures, heads of capillary rise, and equivalent radius of capillary pores, on the basis of Laplace equation for surface tension pressure of spherical bubbles in water. Adsorption quantity distributions were calculated on the profile of chemical potentials of the adsorbed water, equivalent adsorption and/or capillary pressures, and equivalent capillary radius. The suggested theories were proved through its application for the prediction of temperature rise of sulfuric acid due to hydration heat. Adsorption heat calculated on the basis of the potential difference was dependant on various factors, such as surface area, equilibrium constants in Langumuir, BET, etc.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.168-171
• /
• 2001

Organobentonite modified with hexadecyltrimethylammonium (HDTMA) was used to quantify an adsorption of heavy metals. Based on preliminary experiments, optimal soil/solution ratio, a range of pH, and electrolyte were selected. Adsorption experiments of cadmium and lead were conducted to quantify an adsorption selectivity to bentonite and organobentonite. Adsorption of cadmium and lead to bentonite was increased with increasing a soil/solution ratio. Adsorption of cadmium and lead to bentonite was increased with increasing a soil/solution ratio. Adsorptions of heavy metal to organobentonite were slightly reduced relative to bentonite. This study used the principle of hard-soft-acid-base (HBAB) to interpretate an adsorption mechanism. Because of competition between cadmium and lead. adsorption of cadmium and lead was reduced in mixture of heavy metals. Adsorption selectivity.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.596-602
• /
• 2023

Chromium-based metal-organic frameworks (MIL-101(Cr)) were synthesized, and their potential use as a filling material for gas masks or protective clothing was assessed through adsorption experiments using diisopropyl methyl phosphate (DIMP) as a simulant for chemical warfare agents. MIL-101(Cr) was prepared using acetic acid (MIL-101(Cr)-A) and sodium hydroxide (MIL-101(Cr)-N) as modulators. The use of acetic acid as a modulator resulted in a larger specific surface area and a higher DIMP adsorption capacity. MIL-101(Cr)-A absorbed approximately 160% of its own weight of moisture when exposed to an environment with a relative humidity of 90% for 10 days, surpassing other adsorbents such as activated carbon. The DIMP adsorption capacity of MIL-101(Cr)-A decreased to about 40% of its initial adsorption capacity after 24 hours of exposure to an environment with a relative humidity of 90%. However, this capacity is still higher compared to that of activated carbon used in commercial gas masks, suggesting a high potential for future use as a filling material for gas masks or protective clothing.