• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.5
• /
• pp.515-525
• /
• 2007

In this study, various techniques for measurement and analysis of PAHs in the ambient air were verified in order to select a more reliable method. Sampling and analysis of PAHs were done by the EPA TO-13a method. QA/QC of the measurement was conducted to minimize errors in sampling and analyzing processes. The linearity of calibration curve of the PAH standards was good ($R^2{\geq}0.99$). Audit accuracy was evaluated using 5 internal standards of PAHs ($Naphthalene-d_8,\;Acenaphthene-d_{10},\;Phenanthrene-d_{10},\;Chrysene-d_{12},\;Perylene-d_{12}$). Relative standard deviations of the internal standard of the PAHs were ranged from 6.22% for $acenaphthene-d_{10}$ to 8.11% for $chrysene-d_{12}$. To evaluate the surrogate recoveries, two field surrogate standards of PAHs ($fluoranthene-d_{10},\;benzo(a)pyrene-d_{12}$) and two extract surrogate standards of the PAHs ($fluorene-d_{10},\;pyrene-d_{12}$) were spiked into all samples before field sampling and sample extraction, respectively. Recoveries of field the surrogate standards ranged from $80.4{\pm}12.2%$ for $fluoranthene-d_{10}$ to $66.2{\pm}12.8%$ for $benzo(a)pyrene-d_{12}$. Extraction recoveries of the surrogate standards ranged from $70.4{\pm}10.2%$ for $fluorene-d_{10}$ to $77.6{\pm}10.8%$ for $pyrene-d_{10}$. The detection limit of benzo(a)pyrene among 16 PAHs standards for quantitation was 20 pg.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.189-194
• /
• 2010

In the recommendation system that recommends services to a specific user by using the estimation value of other users for users' recommendation service, collaborative filtering methods are widely used. But such recommendation systems have problems that exact classification is not possible because a specific user is classified to already classified group in the course of clustering and inexact result can be recommended in case of big errors in users' estimation values. In this paper, in order to increase estimation accuracy, the researchers suggest a recommendation system that applies collaborative filtering after reclassifying on the basis of a specific user's classification items and then finding and correcting the estimation values of the users beyond the critical value of time. This system uses a method where a specific user is not classified to already classified group in the course of clustering but a group is reorganized on the basis of the specific user. In addition, the researchers correct estimation information by cutting off the subordinate 10% from the trimmed mean of samples and then applies weight over time to the remaining data. As the result of an experiment, the suggested method demonstrated about 14.9%'s more accurate estimation result in case of using MAE than general collaborative filtering method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.8
• /
• pp.1221-1226
• /
• 2016

This study investigated changes in the S-allyl-L-cysteine (SAC) content of garlic using different cooking methods. Methods for determining SAC were validated by determining specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), precision, and accuracy using an high-performance liquid chromatography-fluorescence detection system. Results showed high linearity in the calibration curve with a coefficient of correlation ($R^2$) of 0.9999. The LOD and LOQ values for SAC were 0.15 and $0.47{\mu}g/mL$, respectively. The relative standard deviations for intra- and inter-day precision of SAC were less than 5%. The recovery rate of SAC was in the range from 97.35% to 97.47%. The SAC content of raw garlic was 2.77 mg/g, and there was no significant difference in SAC content according to blanching and microwave treatment. However, SAC content upon boiling and autoclaving at $110^{\circ}C$ and $121^{\circ}C$ increased from 3.50~9.16 mg/g, 6.52~16.21 mg/g, and 14.15~50.24 mg/g with increasing cooking temperature and time, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.3
• /
• pp.127-138
• /
• 2016

Diesel vehicles should be equipped with urea-selective catalytic reduction(SCR) system as a high-performance catalyst, in order to reduce harmful nitrogen oxide emissions. In this study, a three-dimensional Eulerian-Lagrangian CFD analysis was used to numerically predict the multiphase flow characteristics of the urea-SCR system, coupled with the chemical reactions of the system's transport phenomena. Then, the numerical spray structure was modified by comparing the results with the measured values from spray visualization, such as the injection velocity, penentration length, spray radius, and sauter mean diameter. In addition, the analysis results were verified by comparison with the removal efficiency of the nitrogen oxide emissions during engine and chassis tests, resulting in accuracy of the relative error of less than 5%. Finally, a verified CFD analysis was used to calculate the interanl flow of the urea-SCR system, thereby analyzing the characteristics of pressure drop and velocity increase, and predicting the uniformity index and overdistribution positions of ammonia.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.1
• /
• pp.45-51
• /
• 2006

A rapid, selective and sensitive reversed-phase HPLC method for the determination of dipyridamole in human serum was developed, validated, and applied to the pharmacokinetic study of dipyridamole. Dipyridamole and internal standard, loxapine, were extracted from human serum by liquid-liquid extraction with diethyl ether and analyzed on a Nova Pak $C_{I8}$ column with the mobile phase of 40 mM ammonium acetate:methanol:acetonitrile (35:35:30)(v/v/v, pH 7.8). Detection wavelength of 280 nm and flow rate of 1.0 mL/min were fixed for the study. The assay robustness for the changes of mobile phase pH, organic solvent content, and flow rate was confirmed by $3^3$ factorial design using a fixed dipyridamole concentration (50 ng/mL) with respect to its peak area and retention time. And also, the ruggedness of this method was investigated at three different laboratories using same quality control (QC) samples. This method showed linear response over the concentration range of 2-2000 ng/mL with correlation coefficients greater than 0.999. The lower limit of quantification using 0.5 mL of serum was 2 ng/mL, which was sensitive enough for pharmacokinetic studies of dipyridamole. The overall accuracy of the quality control samples ranged from 103.94 to 105.86% for dipyridamole with overall precision (% C.V.) being 4.60-11.49%. The relative mean recovery of dipyridamole for human serum was 97.64%. Stability studies showed that dipyridamole was stable during storage, or during the assay procedure in human serum. The peak area and retention time of dipyridamole were not significantly affected by the changes of mobile phase pH, organic solvent content, and flow rate under the conditions studied. This method showed good ruggedness (within 15% C.V.) and was successfully used for the analysis of dipyridamole in human serum samples for the pharmacokinetic studies of orally administered Dimor tablet (75 mg as dipyridamole) at three different laboratories, demonstrating the suitability of the method.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.1
• /
• pp.23-29
• /
• 2006

A rapid, selective and sensitive reversed-phase HPLC method for the determination of promethazine in human serum was developed, validated, and applied to the pharmacokinetic study of promethazine. Promethazine and internal standard, chlorpromazine, were extracted from human serum by liquid-liquid extraction with n-hexane containing 0.8% isopropanol and analyzed on a Capcell Pak CN column with the mobile phase of acetonitrile-0.2 M potassium dihydrogen phosphate (42:58, v/v, adjusted to pH 6.0 with 1 M NaOH). Detection wavelength of 251 nm and flow rate of 0.9 mL/min were fixed for the study. The assay robustness for the changes of mobile phase pH, organic solvent content, and flow rate was confirmed by $3^{3}$ factorial design using a fixed promethazine concentration (10 ng/mL) with respect to its peak area and retention time. In addition, the ruggedness of this method was investigated at three different laboratories using same quality control (QC) samples. This method showed linear response over the concentration range of 1-40 ng/mL with correlation coefficients greater than 0.999. The lower limit of quantification using 1 mL of serum was 1 ng/mL, which was sensitive enough for pharmacokinetic studies. The overall accuracy of the quality control samples ranged from 96.15 to 105.40% for promethazine with overall precision (% C.V.) being 6.70-11.22%. The relative mean recovery of promethazine for human serum was 63.54%. Stability (freeze-thaw and short-term) studies showed that promethazine was stable during storage, or during the assay procedure in human serum. However, the storage at $-80^{\circ}C$ for 4 weeks showed that promethazine was not stable. Extracted serum sample and stock solution were not allowed to stand at ambient temperature for 12 hr prior to injection. The peak area and retention time of promethazine were not significantly affected by the changes of mobile phase pH, organic solvent content, and flow rate under the conditions studied. This method showed good ruggedness (within 15% C.V.) and was successfully used for the analysis of promethazine in human serum samples for the pharmacokinetic studies of orally administered Himazin tablet (25 mg as promethazine hydrochloride) at three different laboratories, demonstrating the suitability of the method.

• Analytical Science and Technology
• /
• v.15 no.4
• /
• pp.365-372
• /
• 2002

In this study, inorganic elemental distribution in Korean adult human tissue of liver, lung, muscle, kidney, rib and thyroid has been investigated. These tissues were collected from human's body within 48 hours after their death according to IAEA's recommended method, dried by freeze drying method and then pulverized. Neutron activation analysis was applied to these samples to determine the concentrations of 5 major elements of Ca, Mg, Na, K, and Cl and 12 trace elements of Mn, I, Sr, As, Br, Co, Cr, Cs, Fe, Rb, Se, and Zn. To confirm accuracy of analytical result was performed using three kinds of standard reference materials and resulted that the relative error is within 10% for the most of elements and the Z-score indicating a performance of analysis is within 2. The elemental distribution shows that the major elements are distributed homogeneously with a specific concentration and that the trace elements shows a distribution of different concentration with kinds of tissue and their age. Particularly, iodine shows higher concentration with 1000 ${\mu}g/g$ in thyroid, and calcium and strontium show the concentration with 15.9% and 84.4 ${\mu}g/g$ in rib, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.3
• /
• pp.246-252
• /
• 2020

BACKGROUND: Pesticides are broadly used to control weeds and pests, and the residues remaining in crops are managed in accordance with the MRLs (maximum residue limits). Therefore, an analytical method is required to quantify the residues, and we conducted a series of analyses to select and validate the quick and simple analytical method for tolpyralate in five agricultural products using QuEChERS (quick, easy, cheap, effective, rugged and safe) method and LC-MS/MS (liquid chromatography-tandem mass spectrometry). METHODS AND RESULTS: The agricultural samples were extracted with acetonitrile followed by addition of anhydrous magnesium sulfate, sodium chloride, disodium hydrogencitrate sesquihydrate and trisodium citrate dihydrate. After shaking and centrifugation, purification was performed with d-SPE (dispersive-solid phase extraction) sorbents. To validate the optimized method, its selectivity, linearity, LOD (limit of detection), LOQ (limit of quantitation), accuracy, repeatability, and reproducibility from the inter-laboratory analyses were considered. LOQ of the analytical method was 0.01 mg/kg at five agricultural products and the linearity of matrix-matched calibration were good at seven concentration levels, from 0.0025 to 0.25 mg/L (R²≥0.9980). Mean recoveries at three spiking levels (n=5) were in the range of 85.2~112.4% with associated relative standard deviation values less than 6.2%, and the coefficient of variation between the two laboratories was also below 13%. All optimized results were validated according to the criteria ranges requested in the Codex Alimentarius Commission (CAC) and Ministry of Food and Drug Safety (MFDS) guidelines. CONCLUSION: In conclusion, we suggest that the selected and validated method could serve as a basic data for detecting tolpyralate residue in imported and domestic agricultural products.

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.607-616
• /
• 2012

The objective of this study is to evaluate the valid forecast lead time and the accuracy when AWS observed rainfall data are used for real-time river flow forecast. For this, Namhan river basin is selected as study area and SURF model is constructed during flood seasons in 2006~2009. The simulated flow with and without the assimilation of the observed flow data are well fitted. Effectiveness index (EI) is used to evaluate amount of improvement for the assimilation. EI at Chungju, Dalcheon, Hoengsung and Yeoju sites as evaluation points show 32.08%, 51.53%, 39.70% and 18.23% improved, respectively. In the results of the forecasted values using the limited observed rainfall data in each forecast time before peak flow occur, the peak flow under the 20% tolerance range of relative error at Chungju, Dalcheon, Hoengsung and Yeoju sites can be simulated in forecast time-11h, 2h, 3h and 5h and the flow volume in the same condition at those sites can be simulated in forecast time-13h, 2h, 4h and 9h, respectively. From this results, observed rainfall data can be used for real-time peak flow forecast because of basin lag time.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.4 no.1
• /
• pp.71-76
• /
• 2001

Purpose: Many diagnostic modalities for neonatal cholestasis have shown features that are helpful, however until recently none of them are not pathognomonic of biliary atresia (BA). We carried out a prospective study of infants with cholestatic jaundice with the aim of establishing an efficient method of diagnosing BA. Methods: Twenty-seven consecutive infants with cholestatic jaundice were enrolled in this study and ranged from 7 to 152 days in age (mean; $51.2{\pm}34.2$ days). Gastroduodenoscopy was carried out using a fiberscope (Olympus N30). All the babies were fasted for at least 4 hours before the procedure and 20 ml of 10% dextrose solution was given at the time of endoscopy. The endoscopic examination focused on the 5 minutes observation of the evidence of biliary secretion. If there was lack of the evidence of the biliary secretion, endoscopy was removed and repeated the examination with some pause. Results: There are lack of the evidence of biliary secretion in all infants with BA. In non-BA group, 8 out of the 10 infants showed biliary secretion on the first trial, however one (Alagille syndrome) of the two infants without evidence of biliary secretion, finally exhibited biliary secretion on the second trial. The above observations resulted in the diagnostic accuracy of 96.3% with 100.0% sensitivity and 90.0% specificity. Conclusion: In light of the results from our relatively small study, endoscopy is a convenient, and relative inexpensive procedure. we strongly support the use of endoscopy for the diagnosis of BA in the screening and evaluation of infantile cholestasis.