• 한국강구조학회 논문집
• /
• 제14권1호
• /
• pp.87-94
• /
• 2002

기존에 수행된 연구에서는 혼합구조보의 구조적 특성을 결정할 수 있는 제 영향인자 중에서 주근의 정착방법, 전단스팬비의 변화, 이질구조부의 보강 유무, 보강 방법의 변화 등에 따른 일련의 연구 성과들을 발표하였으며, 이러한 결과를 바탕으로 본 연구에서는 이질구조부에 대한 응력전달 및 내력상승 측면에서 철골단면적에 대한 인장철근비(철골철근비)를 변화시킨 단부 RC 중앙부 SC조 혼합보에 대해 RC부 주근의 정착방법(플랜지위 직접 용접, 스터드볼트 용접정착)에 따른 구조적 거동 특성을 고찰하였다. 그 결과 주근의 정착방법에 따른 구조적 특성은 거의 나타나지 않았으며, 철골철근비가 증가함에 따라 내력면에서는 효율성을 기대할 수 있으나, 연성능력이 저하될 수 있으므로 혼합구조보의 구조적 특성을 극대화시키기 위해서는 적정한 철골철근비로 제한하는 것이 필요한 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제37권12호
• /
• pp.33-45
• /
• 2021

본 연구에서는 비닐스트립-시멘트로 보강된 느슨한 중간 모래의 정규화 전단탄성계수 및 감쇠비 산정식을 제안하였다. 상대밀도 40%의 모래시편을 다양한 비닐스트립 혼합비(0.0, 0.1, 0.3, 0.4%)와 시멘트 혼합비(0, 1, 2%)로 보강한 후 15, 30, 60kPa의 구속압조건에서 수행한 공진주시험 자료(Yu, et al., 2018)를 분석하여 정규화 전단탄성계수와 감쇠비 산정식을 보강조건과 구속압조건의 함수로 제안하였다. 제안된 산정식을 적용한 결과와 시험결과를 비교한 결과 결정계수 0.9 이상의 높은 신뢰도를 보여주었다. 본 연구에서 제안된 산정식을 이용하면 비닐스트립-시멘트로 보강된 느슨한 중간모래의 전단탄성계수와 감쇠비를 공진주시험 수행없이 간단히 산정할 수 있어 시간과 비용이 절감될 것으로 기대한다.

• 한국조경학회지
• /
• 제31권5호
• /
• pp.1-10
• /
• 2003

The purpose of this study was to verify the shore margin protection effect of a root system developed from direct sticking of Salix gracilistyla Miq., focusing on the reinforcement of soil shear strength. The materials were 20cm long sticks whose average diameter and weight were 7.52mm and 14.58g respectively, and sandy loam(Sand 60.36%, Silt 28%, Clay 11.64%), whose maximum dry weight(${\gamma}$$_{dmax}$) was 1.59gf/㎤ at the water ratio( $W_{opt}$) 13.8%. The direct shearing test(KS F 2343) was applied to cylindric columms(diameter 132mm) of pure soil and two years old root reinforced soil. At each condition of vertical stress, 10N/$ extrm{cm}^2$, 14.41N/$\textrm{cm}^2$ and 18.82 N/$\textrm{cm}^2$, five soil+root columns were sheared. After shear tests, the root area ratio and soil moisture on the shear plane were measured. The results of this research were as follows: 1. The average of root area ratio was 1.86% and the soil moisture 14.67%. 2. Two years old root system was found to increase the soil shear strength of pure soil in terms of Cohesion(C) and Inner friction Angle($\phi$) as follows. 3. The relationship between root area ratio and the increased shear strength can be presented with the following equation, $\Delta$S ≒ 0.33ㆍ TrㆍAs/A $\Delta$S : Increased Shear Strength Tr : Average Tension Strength of Root, Ar/A : Root Area Ratioioage Tension Strength of Root, Ar/A : Root Area Ratio

• Structural Engineering and Mechanics
• /
• 제47권6호
• /
• pp.819-838
• /
• 2013

This paper summarises the results of an experimental study to investigate the flexural behaviour of reinforced concrete beams strengthened using carbon-fibre reinforced polymer (CFRP) laminate in four-point bending. The experimental parameters included are the reinforcing bar ratio ${\rho}_s$ and preload level. Four bar ratios were selected (${\rho}_s=0.13$ to 0.86%), representing the section of two longitudinal tensile reinforcements, with diameters of 8, 14, 16, and 20 mm in order to reveal the effect of bar ratio on failure load and failure mode. Eight beams that could be considered "full-scale" in size, measuring 200 mm in width, 400 mm in total height and 2300 mm in length, were tested. Three beams were selected with different bar ratios (${\rho}_1$, ${\rho}_2$, ${\rho}_3$), and considered as control specimens (without ), while three other beams identical to the control beams with the same CFRP laminates ratio and a seventh beam with ${\rho}_{min}$ (the lowest bar ratio) were also used. In the second part of the study, two beams with the bar ratio ${\rho}_2$ were preloaded at two levels, 50 and 100% of their ultimate loads, and then repaired. This experimental investigation was consolidated using an analytical model. The experimental and analytical results indicate that the flexional capacity and stiffness of strengthened and repaired beams using CFRP laminate were increased compared to those of control beams, and the behaviour of repaired beams was nearly similar to the undamaged and strengthened beams; unlike the ductility of strengthened beams, which was greatly reduced compared to the control.

• 보존과학회지
• /
• 제36권4호
• /
• pp.284-295
• /
• 2020

This study focuses on reinforcement agents for wall damage, such as cracks, breakage, or delamination, for mural paintings from the Payathonzu temple. Experiments were conducted with filling and grouting agents based on the reinforcing method. In the filling reinforcement experiment, different mixing ratios of lime to sand, and additives (jaggery, seaweed glue, and Primal SF-016) were used. In the grouting reinforcement experiment, the mixing ratio of lime and pozzolan was the same, and the additive types were identical to the filling reinforcement experiment. The filling reinforcement experiment showed that there were fewer physical changes such as contraction, with a greater mixing ratio of lime to sand, however, the compressive strength decreased as the mixing ratio increased. With additives, the change in volume of agent decreased and the compressive strength increased, which was especially prominent for jaggery and Primal SF-016. The grouting reinforcement experiment showed that there was a remarkable contraction with an increased amount of moisture that originates from the characteristic of grouting agents that requires flowability. With additives, the water content of the agent decreased, whereas the compressive strength and adhesion increased. Among the additives, Primal SF-016 exhibited the highest compressive strength, and seaweed glue exhibited the most considerable viscosity and adhesion. The study results showed that the characteristics of reinforcement agents vary according to the mixing ratio and additives of the filling and grouting agents. Therefore, it is necessary to selectively apply the mixing ratio and additives for different reinforcement agents considering the wall damage for conservation treatments.

• 콘크리트학회논문집
• /
• 제13권3호
• /
• pp.195-205
• /
• 2001

본 연구는 화재에 노출된 철근콘크리트 부재의 휭 강도를 평가하기 위한 해석적 연구로서, 고온을 받는 단면에 대한 모멘트-곡률 관계를 구하는 것이다. 해석적 방법으로는 부재 단면에 대한 열전도 해석을 수행한 후 여러 가지 가열 조건에 대한 콘크리트와 철근의 응력-변형률 관계를 이용하여 모멘트-곡률 관계의 해석을 수행한다. 본 연구의 해석 결과는 다음과 같다. (1) 고온에 대한 철근콘크리트 부재의 잔존 휭 강도는 가열시간, 콘크리트 피복두께, 인장철근비의 영향을 받는다. (2) 고온을 받은 후의 잔존 휭 강도는 최소 철근비일 때는 상온시의 강도를 회복하지만, 최대 철근비의 50%일 때와 최대 철근비 일 때는 회복하지 않는 경향을 나타낸다. (3) 최대 철근비를 가진 철근콘크리트 부재는 가열 후 냉각상태에 대하여 철근이 항복하기 전에 콘크리트가 한계상태에 도달하는 경향을 나타낸다.

• 한국건축시공학회지
• /
• 제7권4호
• /
• pp.109-116
• /
• 2007

Building structures are generally large in size and have a long life, and the construction of such structures requires the investment of a huge amount of money and social infrastructure. Furthermore, building structures are closely related to people's life. Recently, however, the rapid development of society has been worsening air pollution, which is in turn accelerating the degradation of building structures. Thus, the safety of building structure is emerging as a critical issue. To cope with this problem, the government enacted "The Special Act on Safety Control for Infrastructure" but we need engineers' higher concern over the maintenance and reinforcement of existing structures. Recently researches are being made actively on repair mortar using ultra rapid hardening cement for recovering the performance of structures. The present study conducted an experiment on the basic physical properties of ultra rapid hardening mortar for repairing and reinforcing building structures using magnesia cement and mono-ammonium phosphate. In the experiment, we changed the water-cement ratio and carried out replacement at different ratio of MAP/MgO(%). We used retarder to have working life, and made comparative analysis through evaluating working life and fluidity and measuring strength by age.

• Earthquakes and Structures
• /
• 제9권4호
• /
• pp.699-718
• /
• 2015

The effect of reinforcing concrete members with high strength steel bars with yield strength up to 600 MPa on the overall seismic behavior of concrete moment frames was studied experimentally and numerically. Three geometrically identical plane frame models with two bays and two stories, where one frame model was reinforced with hot rolled bars (HRB) with a nominal yield strength of 335 MPa and the other two by high strength steel bars with a nominal yield strength of 600 MPa, were tested under simulated earthquake action considering different axial load ratios to investigate the hysteretic behavior, ductility, strength and stiffness degradation, energy dissipation and plastic deformation characteristics. Test results indicate that utilizing high strength reinforcement can improve the structural resilience, reduce residual deformation and achieve favorable distribution pattern of plastic hinges on beams and columns. The frame models reinforced with normal and high strength steel bars have comparable overall deformation capacity. Compared with the frame model subjected to a low axial load ratio, the ones under a higher axial load ratio exhibit more plump hysteretic loops. The proved reliable finite element analysis software DIANA was used for the numerical simulation of the tests. The analytical results agree well with the experimental results.

• Structural Engineering and Mechanics
• /
• 제24권1호
• /
• pp.107-136
• /
• 2006

The present paper proposes a semi-empirical analytical expression that is capable of determining the shear strength of reinforced concrete beams with longitudinal bars, in the presence of reinforcing fibers and transverse stirrups. The expression is based on an evaluation of the strength contribution of beam and arch actions and it makes it possible to take their interaction with the fibers into account. For the strength contribution of stirrups, the effective stress reached at beam failure was considered by introducing an effectiveness function. This function shows the share of beam action strength contribution on the global strength of the beam calculated including the effect of fibers. The expression is calibrated on the basis of experimental data available in literature referring to fibrous reinforced concrete beams with steel fibers and recently obtained by the authors. It can also include the following variables in the strength previsions: - geometrical ratio of longitudinal bars in tension; - shear span to depth ratio; - strength of materials and fiber characteristics; - size effects. Finally, some of the more recent analytical expressions that are capable of predicting the shear strength of fibrous concrete beams, also in the presence of stirrups, are mentioned and a comparison is made with experimental data and with the results obtained by the authors.

• 한국화재소방학회논문지
• /
• 제25권5호
• /
• pp.8-13
• /
• 2011

고강도 콘크리트는 화재 시 고온에 노출되어 폭렬현상이 발생된다. 폭렬은 철근노출과 함께 구조부재의 단면을 감소시키며, 이로 인하여 구조적 거동에 심각한 문제를 발생시킨다. 본 연구의 목적은 이러한 고강도 콘크리트의 내화피복재로 활용하기 것으로 퍼라이트와 폴리프로필렌 섬유로 경량모르타르를 제조하여 그 역학적 성상을 파악하는데 있다. 이에 따른 실험인자로는 물시멘트비, 골재시멘트비, 폴리프로필렌 섬유 첨가량이다. 연구결과 퍼라이트와 폴리프로필렌 섬유를 첨가함으로서 모르타르의 공극구조를 변화시킬 수 있었으며, 단위중량을 감소시킬 수 있었다. 또한, 고강도 콘크리트의 내화피복재로서 경량모르타르를 사용할 수 있는 가능성을 확인하였다.