• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.233-236
• /
• 2008

본 연구는 슬래브의 하부철근이 포스트 텐션(PT) 플랫 플레이트 골조의 내진성능에 미치는 영향을 평가하였다. 이를 위하여 슬래브-기둥 접합부에 슬래브 하부철근이 있는 경우와 없는 경우의 3층, 9층 골조를 중력하중만 고려하여 설계하였다. 본 연구에서는 대상 건물을 비선형 정적 푸쉬 오버 해석하여 기둥을 관통하는 슬래브 하부철근 유무에 따른 전체 구조시스템 거동을 평가 하였다. 본 연구에서 사용한 접합부 모델은 뚫림 전단과 파괴메커니즘을 예측할 수 있도록 본 연구자들에 의하여 기존 연구에서 제안된 것이다. 본 연구결과에 따르면 기둥을 관통하는 슬래브 하부철근은 PT 플랫 플레이트 골조의 내진성능에 큰 영향을 미치는 것으로 나타났다. 특히 슬래브 하부 철근이 있는 PT 플랫 플레이트 골조는 슬래브 하부철근이 없는 골조에 비하여 최대 강도와 변형 능력이 크게 향상되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.337-340
• /
• 2005

In this study, an effect of fiber blending on material property of Hybrid Fiber Reinforced Concrete (HFRC) was evaluated. Also, Compare and evaluates collating and mechanical property by the mixing rate of fiber for HFRC was determine. Modulus of rupture and strength effectiveness of Hybrid Fiber Reinforced Concrete mixed with macro-fiber(steel fiber) and micro-fiber(glass fiber, carbon fiber, cellulose fiber). Test result shows, in the case of mono fiber reinforced concrete. As the steel fiber mixing rate increases to 1.5$\%$, the strength effectiveness promotion rate rises. However, when is 2.0$\%$, strength decreases. In the case of hybrid fiber reinforcement concrete, synergy effect of micro fiber and macro fiber happens and higher Modulus of rupture and strength effectiveness appears than mono-fiber reinforcement concrete. Use of hybrid fiber reinforcement in concrete caused a significant influence on its fracture behavior; consequently, caused increase by mixing rate of steel fiber + carbon fiber and contributed by steel fiber + glass fiber, steel fiber + celluloid fiber in reinforcement effect in order. And was expose that steel fiber(1.5$\%$) + carbon fiber(0.5$\%$) is most suitable association.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.363-372
• /
• 1996

A common site of fracture in maxillary complete denture is on the anteroposterior midline that coincides with the notch for relief of the labial frenum. Various approaches to reduce the incidence of this type of fracture have been suggested. The most widely used technique is the reinforcement of acrylic resin denture base with several solid metal forms. But few comparative studies on the efficacy of metal reinforcements have been reported. This study was conducted to compare reinforcing effects of commonly available metal reinforcements, which include wire, metal mesh embedded in the denture base and metal plate affixed to the impression surface of denture base by silicoating technique. This was load on the posterior. The strain gauges were oriented perpendicular to the anteroposterior midline of maxillary polished denture surface at one labial and the four palatal sites Non-renforced denture was used as control. The results were as follows : 1. In the non-reinforced denture group, only tensile strains on the palatal polished surface were observed. The tensile strains decreased in the order of incisive papilla, posterior denture border area, mid palatal area and rugae area. Compressive strain was observed on the labial polished surface. 2. As compared with the non-reinforced denture group, the metal plate or the metal mesh reinforced denture groups showed reduced palatal tensile strains,and the metal mesh reinforcement had a better reinforcing effect than the metal plate. But both reinforced denture groups showed no difference in the amount of compressive strain on the labial polished surface when compared to the non-reinforced denture group. 3. The metal wire positioned just above the labial notch decreased the compressive strain on the labial polished surface. But the presence of metal wires in the palatal polished surface caused increase in tensile strains in the area.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1713-1721
• /
• 1994

Intermetallic-matrix composites(IMCs) have the potential of combing matrix properties of oxidation resistance and high temperature stability with reinforcement properties of high specific strength and modulus. One of the major limiting factors for successful applications of these composite at high temperatures is the formation of interfacial reactions between matrix and ceramic reinforcement during composite process and during service. The purpose of the present investigation is to develop a better understanding of the nature of creep fracture mechanisms in a $Ni_{3}Al$ composite reinforced with both $TiB_{2}$ and SiC particulates. Emphasis is placed in the roles of the products of the reactions in determining the creep lifetime of the composite. In the present study, creep rupture specimens were tested under constant ranging from 180 to 350 MPa in vacuum at $760^{\cric}C$. The experimental data reveal that the stress exponent for power law creep for the composite is 3.5, a value close to that for unreinforced $Ni_{3}Al$. The microstructural observations reveal that most of the cavities lie on the grain boundaries of the $Ni_{3}Al$ matrix as opposed to the large $TiB_{2}/Ni_{3}Al$ interfaces, suggesting that cavities nucleate at fine carbides that lie in the $Ni_{3}Al$ grain boundaries as a result of the decomposition of the $SiC_{p}$. This observation accounts for the longer rupture times for the monolicthic $Ni_{3}Al$ as compared to those for the $Ni_{3}Al/SiC_{p}/TiB_{2} IMC$. Finally, it is suggested that creep deformation in matrix appears to dominate the rupture process for monolithic $Ni_{3}Al$, whereas growth and coalescence of cavities appears to dominate the rupture process for the composite.

• 대한치과보철학회지
• /
• 제55권1호
• /
• pp.46-52
• /
• 2017

임시보철물은 고정성 보철물로의 수복 과정에서 지대치 보호 및 기능과 심미성 회복의 측면에서 중요한 역할을 수행한다. 특히 이를 장착한 상태로 최종 수복 전에 장기간의 관찰이 필요한 환자에서 그 중요성이 더욱 강조되나, 상대적으로 낮은 강도로 인하여 잦은 파절이 발생할 수 있으며 이를 방지하기 위해 강화된 임시보철물의 제작을 고려할 수 있다. 이 문헌에서는 교합 수직 고경의 증가를 필요로 하는 환자의 증례를 소개하고자 하였으며, 수직 고경 증가의 영향으로 임시보철물 사용 시 더 큰 부하의 작용 및 장기간의 사용이 예상되었다. 이에 주조 금속 하부구조물을 첨가하여 bis-acryl 레진으로 강화된 임시보철물을 제작하였으며, 약 4개월의 관찰 기간 동안 만족스러운 결과를 보였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권1호
• /
• pp.27-34
• /
• 2012

본 연구에서는 기존의 모르타르 충전식 슬리브 철근이음에 대한 부착강도식으로부터 유도한 이 철근이음의 파괴모드 추정방법을 이용하여, AIJ 규준에 의하여 평가한 이 슬리브 철근이음의 강성을 검토하였다. 이것을 위하여 261개 모르타르 충전식 슬리브 철근이음의 기존 실험자료를 채택하여 실험의 결과를 분석한 결과에 의하면 모르타르 충전식 철근이음의 파괴모드 추정방법은 돌기가 없는 강관 슬리브에 SD500 철근을 사용한 철근이음을 제외한 모르타르 충전식 슬리브 철근이음에 대한 강성을 효과적으로 평가할 수 있었다. 그리고 이 슬리브 철근이음의 파괴모드 추정방법에 적용하여 철근의 인장파단 영역에 있는 실험체 중에 주물 슬리브와 돌기가 있는 강관 슬리브를 사용한 실험체에서 SD400 철근을 사용한 경우는 98%, SD500 철근을 사용한 경우는 모든 실험체가 단조가력 시의 강성이 AIJ 규준의 A급 이상인 것으로 나타났고, 철근의 인장파단 영역에 있는 모든 실험체는 슬리브의 종류와 슬리브에 매입한 철근 종류에 관계없이 반복가력 시의 강성이 AIJ 규준의 A급 이상인 것으로 나타났다.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.328-334
• /
• 2017

PURPOSE. This study evaluated fracture resistance with regard to ferrule lengths and post reinforcement on endodontically treated mandibular premolars incorporating a prefabricated post and resin core. MATERIALS AND METHODS. One hundred extracted mandibular premolars were randomly divided into 5 groups (n=20): intact teeth (NR); endodontically treated teeth (ETT) without post (NP); ETT restored with a prefabricated post with ferrule lengths of either 0 mm (F0), 1 mm (F1), or 2 mm (F2). Prepared teeth were restored with metal crowns. A thermal cycling test was performed for 1,000 cycles. Loading was applied at an angle of 135 degrees to the axis of the tooth using a universal testing machine with a crosshead speed of 2.54 mm/min. Fracture loads were analyzed by one-way ANOVA and Tukey HSD test using a statistical program (${\alpha}=.05$). RESULTS. There were statistical differences in fracture loads among groups (P<.001). The fracture load of F2 ($237.7{\pm}83.4$) was significantly higher than those of NP ($155.6{\pm}74.3N$), F0 ($98.8{\pm}43.3N$), and F1 ($152.8{\pm}78.5N$) (P=.011, P<.001, and P=.008, respectively). CONCLUSION. Fracture resistance of ETT depends on the length of the ferrule, as shown by the significantly increased fracture resistance in the 2 mm ferrule group (F2) compared to the groups with shorter ferrule lengths (F0, F1) and without post (NP).

• 한국지반환경공학회 논문집
• /
• 제17권4호
• /
• pp.39-46
• /
• 2016

터널구조물의 안정성 최종평가는 굴착완료 후 현장계측을 수행하여 계측값의 수렴 여부를 통해 판단하는 것이 일반적 평가 기준이다. 본 연구에서는 굴착하는 터널 주변 지반조건이 불량하여 터널 안정성 확보를 위한 보강을 적용한 후 국부적으로 보강구간에서 추가적인 붕락 또는 과다변위가 발생한 터널현장시공 사례의 해석적 방법과 상관성을 분석하였다. 추가 붕락터널에서 붕락유형을 조사해 보면 대부분 천단부 붕락이 발생하고 붕락된 구간에 대한 지질적인 조건을 분석해보면 천단부에서 지표부 인근까지 연장되어 존재하는 단층파쇄대가 존재하는 경우와 상관성이 있는 것으로 분석되었다. 이와같이 단층파쇄대와 같은 지반조건이 터널 천단부에서 지표부 인근까지 연장성을 가지는 경우에는 기존 수치해석적 방법으로 예측한 거동보다 더 큰 거동을 하는 것으로 분석되었다.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.227-237
• /
• 1999

As the interface bonding phenomenon between the matrix and the reinforcements has a large effect on the mechanical properties of MMCs, a sugestion of the strength analysis technique considering the residual stress and the interface bonding phenomenon is very important for the design of pans and the estimation of fatigue behavior. In this paper the three dimensional finite element anaysis is performed during the elasto-plastic deformation of the particulate reinforced metal matrix composites. It was analyzed with the volume fractions in view of microscale. Bonding strength. interface separation and matrix void growth between the matrix and the reinforcements will be predicted on deformation under tensile loading. An interface seperation is estimated by the fracture criterion which is a critical value of generalized plastic work per unit volume. The shape of the reinforcement is assumed to be a perfect sphere. And the type of the reinforcement distribution is assumed as FCC array. The thermal residual stress in MMCs is induced by the heat treatment. It is included at the simulation as an initial residual stress. The element birth and death method of the ANSYS program is used for the estimation of the interface bonding strength, void generation and propagation. It is assumed that the fracture in the matrix region begin to occur under the external loading when the plastic work per unit volume is equal to the critical value. The fracture strain will be defined. The experimental data of the extruded $SiC_p$>/606l Al composites are compared with the theoretical results.

• 대한치과보철학회지
• /
• 제32권3호
• /
• pp.411-430
• /
• 1994

The denture may be fractured accidentally by an impact while outside the mouth, or may be cracked or broken while in service in the mouth. The latter is generally a fatigue failure caused by repeated flexure over a period of time. This investigation compared the flexural fatigue resistance, the impact force and the transverse strength of two denture base materials with and without the grid strengthener, the T300, the T800 and the Kevlar fiber to evaluate the fracture resistance. The distribution and behavior of fibers across fracture lines were examined by Hi-Scope Compact Microvision System. Through analyses of the data from this study, the following conclusions were obtained. 1. The flexural fatigue resistance, impact strength and transverse strength of high impact strength resin were higher than those of conventional heat polymerizing resin, but statistically there was no significant difference(p>0.05). 2. All specimens with and without the grid strengthener did not show significant differences in the flexural fatigue, the impact and the transverse strength test(p>0.05). 3. All specimens reinforced with the T300, the T800 and the Kevlar fiber showed significant increase of the fatigue resistance and the impact force(p<0.05). 4. All specimens reinforced with the T800 and the Kevlar fiber showed significant increase of the transverse strength(p<0.05). 5. All specimens reinforced with the T300, the T800 and the Kevlar fiber exhibited greenstick fractures. The fibers tended to remain enveloped in the resin, resisting pull-out.