• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.395-406
• /
• 2013

The conservation of damaged object should be restored by the similar material with the original and they have to reversibility as possible as. The characteristics of Buddhist mural paintings composed of clay are with soft material. So far, there have been a number of researches done on filling material that reinforces cracks and exfoliation of mural painting. Based on the application of traditional materials, it was found that they are appropriate to various applications. However, only based on those research results, there are some constraints to the application in the field. In addition, there has been only a few researches done on physical characteristics of filling materials. A major issue is that there is not any standard established on various mixing ratio, which is required for treatment of mural painting. This study was carried out to understand the physical characteristics of filling materials on clay mural painting. The 1st test was conducted to analyze test specimen in twelve different conditions by varying soil mixing ratio and organic medium. The 2nd test was conducted to manufacture filling materials appropriate to the mural painting, based on the result of stable condition from the 1st test, and which was applied to treatment in field.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.5
• /
• pp.150-159
• /
• 2011

The need of securing the stability and extending service lives by efficient maintenance of deteriorated tunnels for several decades has been increased. The stability and the usability of conventional tunnels can be decreased by change of physical properties of the surrounding ground, geometrical properties of the tunnel, an underground water level, environmental conditions, oxidation of lining and the breakdown of constituent materials. In respect of a long-term view, it is need to check all sorts of degradation, the degree of damage and durability to improve the serviceability and to come up with measures to maintain effectively. This paper is about study to analyze the stability of conventional tunnels(American Steel Support Method. ASSM). Three tunnels are chosen in those built in the 1930s and 1960s and the locations of tunnels are selected variously(ChungCheong, GyungBuk, GangWon, Jeolla, etc.) to secure reliability of this study. The state of repair and reinforcement of linings, cracks, and thickness and strength of lining of conventional tunnels in service are researched, compared and analyzed. The crack gauge, the GPR, the schmitt hammer was used for the crack investigation, cavitation, the strength respectively. By using these, the comparative analysis for conventional tunnels was conducted. As a result, there are more cracks in tunnels built in the 1930s than those of tunnels built in the 1960s, and lining strength of the 1930s is higher than those of the 1960s. The thickness of lining in tunnels built in the 1960s is higher than those in tunnels built in the 1930s. In proportion to thickness, cavitation occurred more frequently in tunnels built in the 1960s compared to those in tunnels built in the 1930s.

• Journal of the Korea Concrete Institute
• /
• v.23 no.3
• /
• pp.377-384
• /
• 2011

Although concrete is considered as fire proof materials, high strength concrete shows severe material and structural damages when exposed to fire. To understand such damages in high strength concrete structures, the effects of various design parameters and fire condition on the thermal behaviors of high strength concrete structures are investigated in this study. In order to achieve this goal, fire tests are performed on high strength concrete columns with different fire conditions and design parameters including cross sectional area, cover thickness, and reinforcement alignment. To investigate thermal behaviors, temperature distributions and amount of spalling are measured. In overall, the columns show rapidly increasing inner temperatures between 30~60 mins of the fire tests due to spalling. In detail, the higher temperature distributions are observed from the columns with the larger cross section and less cover thickness. Moreover, among the columns with same reinforcing ratio, larger number of reinforcements with the smaller diameter causes the higher temperature distribution. The findings from the experimental study allow not only understanding of thermal behaviors of high strength concrete columns under fire, but also guidance in revising fire safety design.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.111-120
• /
• 2012

This paper is a report about lap splice performance of rebar embedded in the strain-hardening cement-based composites (SHCCs) under monotonic and repeated tension loading. Ten mix proportions of cement-based composites such as SHCCs and normal concrete were investigated. The study parameters are comprised of (1) types of reinforcing fibers (polyethylene and steel fiber), (2) replacement levels of expansive admixture (EXA, 0% and 10%), and (3) compressive strength (30 and 100 MPa) of cement-based composites. Lap splice lengths (ld) of rebars in SHCC materials and normal concrete were 60% and 100% of splice length calculated by code requirements for structural concrete, respectively. Test results indicated that SHCCs materials can lead to enhancements in the lap splice performance of embedded rebar. All of the fiber reinforcement conditions (PE-SHCC and PESF-SHCC) considered in this study produced considerable improvements in the tensile strength, cracking behavior, and bond strength of lap-spliced rebar. Furthermore, adding EXA to SHCC matrix improved the tensile lap splice performance of rebar in SHCC materials. However, for controlling crack behavior, the performance of PE-SHCC was better than that of PESF-SHCC due to its mechanical properties. This study demonstrated an effective approach for reducing required development length of lap spliced rebar by using SHCC materials.

• Korean Journal of Social Welfare
• /
• v.56 no.1
• /
• pp.253-282
• /
• 2004

The study is to examine the actual conditions and problems of educational welfare which is a part of social welfare and to offer its future directions and things to do. First of all, education has been considered to be part of social welfare in developed countries for a long time and it has been used the same as school educational welfare. These days Korea is confronted with increasing needs of educational welfare caused by emphasis of manpower, appearance of new poor class after IMF, handing down poverty to their children, absence of public education and educational fever, stress of life long learning and extending needs of students' social welfare service. In advanced countries compared to Korea, people perceive education as an equal opportunity. To reach this thesis, various efforts have been making in terms of manpower development such as reform of related laws, financial and official support, offering of parental skills and protecting children for the disadvantaged, dispatching school social workers and overall life improvement. The subjects and age of educational welfare are also diverse ranging from poor families and pre school children to general public and adults. On the other hand, Korea lacks related laws and financial support that are supposed to enforce educational welfare systematically. Also integrated and professional services are not often available due to the lack of cooperation between related agencies. Therefore, government's role and responsibility should be defined clearly in the future directions of educational welfare in Korea. For this, it is needed to establish related laws and build a concrete financial and executive interrelationship. Also every person should be a target of educational welfare putting priorities on the disadvantaged. A lot of efforts should be made to achieve things mentioned above. Multi-dimensional approach intertwined with education, welfare and labour, establishment of cooperation system between related agencies, reinforcement of life long learning, extension of free education including infants and toddlers, and offering financial support to the poor are a few among these efforts. Finally, institutionalization of school social welfare and improvement school facilities are strongly recommended to get to the right track of educational welfare.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.1
• /
• pp.133-151
• /
• 2007

In the era of 21st new century. reinforcement of regional competitiveness by establishing innovation system is taking its place of main small and medium sized enterprise policies in major developed countries. The model of regional balanced development for promoting small and medium sized enterprise is a main frame of governmental small and medium sized enterprise policies. which complements national innovation process. And in the level of local area, the model is regional network system, molded in the process of induction, application, modification, proliferation of new technologies and knowledge by local businessman and innovators. This study focused on the strategy development for small and medium sized businesses to increase local competitive power, in terms of regional balanced development. In order to find the real problems and improvement alternatives for local competitive power, this study both reviewed the common strategies and action programs advanced in developed countries for small businesses, and did research on the current economic conditions in local area. Based on the lessons from foreign cases and the analysis of the current situations in small business in local area, the study suggested the model of regional balanced development for promoting small and medium sized enterprise including formation of innovation network system through the invitation of leading firms in the area, industry-university partnerships, and development and attraction for small and medium sized businesses.

• Journal of Adhesion and Interface
• /
• v.13 no.2
• /
• pp.58-63
• /
• 2012

CFRP chip is the byproduct from carbon fiber reinforced plastic (CFRP) processing. CFRP chip is not simply a waste mainly composed of fine carbon fiber and epoxy resin. CFRP chip keeps matrix to maximize their reinforcing effect. To obtain a uniform length of carbon fiber in CFRP chip, chip was chopped ina mortar. CFRP chip should be purified to get better interface adhesion. Epoxy resin on the carbon fiber was removed by $H_2O_2$ surface etching treatment. Optimal dispersion and fabrication conditions of CFRP chip embedded in phenolic resin were determined by thermal stability for fire retardant applications. CFRP chip-phenolic composite exhibits better mechanical and thermal properties than neat phenolic resin. Surface condition of CFRP chip-phenolic composite was evaluated by static contact angle measurement. Contact angle of CFRP chip-phenolic composite was greater than neat phenolic due to heterogeneous condition of fine carbon fibers. From the evaluation for fire retardant (ASTM D635-06) test, thermal stability of CFRP chip-phenolic composite was found to be improved with higher concentration of CFRP chip.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.195-200
• /
• 2011

KS F 2782 (for shotcrete accelerators) standard cross-section of tunnel construction or repair is a reinforcement used in the field of shotcrete accelerators as a criterion in assessing shotcrete performance. Thus, KS F 2782 by standard accelerator will determine the nature of the product of concrete accelerators that will be used to record variations in the product roles, through determination of the quality of the experimental method to identify only the quality of the many variables that exist. This evaluation standard has so far distinguished accelerator products in indoor experiments that do not meet quality standards but were mostly for an on-site accelerator mixed with the shotcrete after being quite satisfied with the level of quality in a certain number of products. This observation is derived from the results of an indoor experiment considered to verify whether the site is suitable for indoor experiments, and whether its actual location in the city is relevant to the accelerator quality, to find a way to test if it fits. This study centers on the material conditions of the shotcrete accelerator and a variety of experimental results, and used the Gilmore needle to compare the compressive strength and KS F 2782 specification of the accelerator as a means to ensure product quality conformity analysis and for further research experiments. In conclusion, a portion of KS F 2782 standard that fixes the problems that can be resolved from the ground up as a whole is not a review for the domestic reality. As an indoor experiment to ensure uniformity in the field when applied in a sufficient correlation, complement must be in place.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.128-135
• /
• 2010

Polymer-modified cement mortar(PCM) has been widely used for strengthening of the concrete structures due to its excellent physical properties such as high strength and durability. Adhesive strength or behavior, on the other hands, between PCM and concrete is very important in strengthening the concrete member using PCM. Therefore the adhesive failure mechanism between PCM and concrete should be fully verified and understood. This study was performed to evaluate adhesive strength of PCM to the concrete by the direct pull-out test. In the direct pull-out tests, the adhesive strength under the various pre-treatment conditions such as immersion, thunder shower, freezing and thawing are evaluated. Also, the field direct pull-out test are performed to investigate the adhesive strength of mock-up test specimens. In the results of the test, the adhesive strength value by field test are lower than those of the standard curing condition. From these comparison and investigation, field test result was similar with the thunder shower test result. The results of the test was used to evaluate the korean industrial standard of polymer modified cement mortars for maintenance in concrete.

• Tunnel and Underground Space
• /
• v.20 no.2
• /
• pp.82-91
• /
• 2010

Grouting technology is one of the ground improvement methods used in water controlling and reinforcement of rock mass in underground structure construction. It is necessarily required to find out the characteristics of grout flow through discontinuities in a rock mass for an adequate grout design and performance assessment. Laminar flow is not always applicable in simulating a grout flow in a rock mass, since the rock joints usually have apertures at a micro-scale and the flow through these joints is affected by the joint roughness and the velocity profile of the flow changes partially near the roughness. Thus, the influence of joint roughness and aperture on the grout flow in rough rock joint was numerically investigated in this study. The commercial computational fluid dynamics code, FLUENT, was applied for this purpose. The computed results by embedded Herschel-Bulkley model and VOF (volume of fluid) model, which are applicable to simulate grout flow in a narrow rock joint that is filled with air and water, were well compared with that of analytical results and previously published laboratory test for the verification. The injection pressure required to keep constant injection rate of grout was calculated in a variety of Joint Roughness Coefficient (JRC) and aperture conditions, and the effect of joint roughness and aperture on grout flow were quantified.