• 제목/요약/키워드: reheating method

검색결과 49건 처리시간 0.029초

냉동저장, 조리법, 재가열이 대고기의 지질 산패에 미치는 영향 (Effect of Frozen Storage, Cooking Methods and Reheating on Lipid Oxidation in Chicken Meat)

  • 장선미;김영순
    • 한국식품영양학회지
    • /
    • 제8권2호
    • /
    • pp.93-104
    • /
    • 1995
  • Effect of frozen storage(0, 15, 30, 40 days, -18$^{\circ}C$), cooking methods(frying, microwaving) and reheating on lipid oxidation in chicken meats were evaluated by measuring thiobarbituric acid value (TBA value) and by measuring fluorescence value. TBA values were increased by storage days and were higher in leg meats than breast meats. According to cooking method, TBA values were higher in frying chicken meats. The fluorescence values were also increased by storage days and were higher in breast meats than leg meats.

  • PDF

Effects of Reheating Conditions and Sodium Chloride/Phosphate Levels on Color Characteristics of Precooked Pork Patties

  • Choi, Ji-Hun;Choi, Yun-Sang;Han, Doo-Jeong;Kim, Hack-Youn;Lee, Mi-Ai;Kim, Si-Young;Lee, Ju-Woon;Jeong, Jong-Youn;Kim, Cheon-Jei
    • 한국축산식품학회지
    • /
    • 제30권4호
    • /
    • pp.617-625
    • /
    • 2010
  • The objective of this study was to determine the effect of reheating methods on the color characteristics of precooked pork patties with various NaCl and phosphate levels. NaCl/phosphate levels for each formulation were as follows; N1 (1% NaCl), N1+P (1% NaCl+0.3% phosphate), N2 (2% NaCl), and N2+P (2% NaCl+0.3% phosphate). The reheating methods used were by electric grill and microwave oven. The surface color of the patties reheated by microwave showed more brown and less-intense red, and the phosphate-treated patties reheated by microwave were more reddish and less brownish. With increased amounts of added NaCl and phosphate, the internal color of patties was more reddish, and the phosphate-treated patties reheated by microwave had more brown than those reheated by electric grill. Among all of the treatments, there were no significant differences in surface color, internal color, and overall appearance. Thus, the color changes in reheated patties were influenced by reheating methods and phosphate.

가열로 내 소재의 2 차원 총괄열흡수율 추정에 관한 역해석 (An Inverse Analysis on the Estimation of Two-dimensional Total Heat Exchange Factor on the Billet in the Reheating Furnace)

  • 곽동성;강덕홍;김기홍;김우승
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 추계학술대회
    • /
    • pp.175-180
    • /
    • 2003
  • An inverse problem to determine two-dimensional total heat exchange factor is studied for the prediction of the billet temperature in the reheating furnace. Temperature measurements by the experiment are used in the inverse analysis. This inverse analysis employs the conjugate gradient method. The total heat exchange factors for 12-zones of the cross-section of the billet are estimated. The estimated temperatures at measurement locations are in good agreements with the measured temperatures.

  • PDF

신경망을 이용한 판온예측모델내 공정상수 설정 방법 (A Computing Method of a Process Coefficient in Prediction Model of Plate Temperature using Neural Network)

  • 김태은;이해영
    • 조명전기설비학회논문지
    • /
    • 제28권11호
    • /
    • pp.51-57
    • /
    • 2014
  • This paper presents an algorithmic type computing technique of process coefficient in predicting model of temperature for reheating furnace and also suggests a design method of neural network model to find an adequate value of process coefficient for arbitrary operating conditions including test conditons. The proposed neural network use furnace temperature, line speed and slab information as input variables, and process coefficient is output variable. Reasonable process coefficients can be obtained by an algorithmic procedure proposed in this paper using process data gathered at test conditons. Also, neural network model output equal process coefficient under same input conditions. This means that adquate process coefficients can be found by only computing neural network model without additive test even if operating conditions vary.

분할법을 이용한 슬래브 가열로의 전열 해석 (Numerical Simulation of Slab Reheating Furnace by the Zone Method)

  • 박흥수;이용국;김기홍;조길원;민병현;김무환
    • 대한기계학회논문집
    • /
    • 제15권3호
    • /
    • pp.970-981
    • /
    • 1991
  • 본 연구에서는 총괄 열 흡수율법과 분할법이 지니고 있는 전열 해석상의 한계 를 보완하고 슬래브 가열로의 전열해석에 실질적으로 적용하기 위하여, 분할법으로 내 내 분위기 온도를 계산하고 이로부터 슬래브의 노내 온도이력을 예측하는 계산모델을 제시하였다. 계산모델의 유용성 확인을 위하여는, Fig.1에 보인 바와 같은 최대 슬 래브 처리량이 235ton/hr인 후판 가열로를 대상으로 하여, 노내 분위기 가스 온도 및 슬래브의 온도이력을 측정하고 이를 계산 결과와 비교하였다. 이와 아울러 연료유량, 슬래브 재로시간(residence time) 및 장입 온도등의 조업조건 변화가 분위기 가스온도 와 슬래브의 온도이력에 미치는 영향을 검토하여 가열로의 효율적 조업을 위한 자료를 제시하였다.

고성능 순산소 연소시스템의 가열특성에 대한 연구 (Development of High Performance Intelligent Oxy-fuel Combustion Reheating Furnace)

  • 이상준;노동순;김혁주;이은경;최규성;고창복;이승수
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
    • /
    • pp.175-180
    • /
    • 2004
  • Improving furnace efficiency is a high priority need for aluminum, glass, steel and other metal casting industries. Oxy-fuel combustion is considered to be one of the most effective method to improve thermal efficiency and reduce $NO_x$, SOx and $CO_2$ emissions for high temperature furnaces. The characteristics of an oxy-fuel flame, in particular its shape, radiation profile and exhaust gas composition are considerably different to those of an air-fuel burner. For this reason, a new approach is needed regarding factors such as burner design, power input levels, number and positioning strategies of burners and also control philosophies. In this paper will discuss the latest developments of high performance oxy-fuel combustion reheating furnace system. This high performance oxy-fuel combustion system will be shown to be technologically superior to other types of combustion systems in the areas of fuel efficiency, emissions and productivity.

  • PDF

복합교반법으로 제조한 금속복합재료의 Thixoforming용 재가열공정 (Reheating Process of Metal Matrix Composites Fabricated by Combined Stirring Process for Thixoforming)

  • 이동건;강충길
    • 소성∙가공
    • /
    • 제11권1호
    • /
    • pp.45-53
    • /
    • 2002
  • The forming process of metal matrix composites by die casting and squeeze casting process are limited in size and dimension In term of final parts. The melt strirring method have the problems that the homogeneous distribution of the reinforcements is difficult due to the low weldability and the density difference between the molten metal and the reinforcement. The thixoforming process for metal matrix composites has numerous advantages compacted to die casting, squeeze casting and compocasting. However, for the thixofoming process, the billet with the desired volume fraction must be heated to obtain a uniform temperature distribution over the entire cross-sectional areas. To obtain the reheating conditions of composites, the particulate reinforced metal matrix composites for thixoforming were fabricated by combined stirring process which is simultaneously performed with electro-magnetic stirring and mechanical stirring process. The matrix alloy and reinforcement are used to aluminum alloy(A357) and SiCp with diameter 14, $25{\mu}m$, respectively. The microstructure characteristics were investigated by changing the volume fraction and reinforcement size. The heating conditions to obtain the uniform temperature distribution in cross section area of fabricated metal matrix composites billet are proposed with heating time, the heating temperature and the holding time.

가열로 유동특성에 관한 수치해석 (Numerical Simulation of Flow Characteristics in a Heating Furnace)

  • 이동은;김창영;김상준;김종근
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.511-516
    • /
    • 2001
  • The flow characteristics in a hot mill reheating furnace is numerically simulated in this study. Navier-Stokes equations for conservation of mass, momentum, energy are solved and the standard $k-\varepsilon$ model, mixture fraction/PDF model are used for the turbulent reacting flow in the furnace. Radiation heat transfer is incorporated by the P-1 method with the absorption coefficient evaluated using WSGGM. First, simulation results are obtained for the total furnace region with existing protective dam, and then the calculations are carried out only for the preheating zone in the furnace. In that zone, additional center darn is built in order to control the flow behavior of the inlet air and the combustion gas.

  • PDF

Si, Mn, V이 첨가된 비조질강의 미세조직 및 기계적 성질에 미치는 냉각속도의 영향 (Effect of Cooling Velocity on the Microstructures and Mechanical Properties of Si, Mn, V added HSLA Steels)

  • 박연서;최창수;정인상
    • 열처리공학회지
    • /
    • 제14권5호
    • /
    • pp.267-274
    • /
    • 2001
  • Microalloyed steels, which substituted by conventional quenched and tempered steels, have been used in a wide variety of structural and engineering application. The main driving force for preference of MA steels is a cost reduction which can be achieved by an omission of heat treatment. In this study, low carbon martensitic MA steels in 0.18C-0.30(0.60)Si-2.00(1.80)Mn-0.05S-1.5Cr-0.05(0.10)V-0.015Ti(wt%) were investigated to know the effects of cooling method on the mechanical properties and microstructures of Si, Mn, V added microalloyed steel at different reheating temperature. Microstructure of oil quenched steels which were comprised lath martensite, auto-tempered martensite and retained austenite, had more various structure than that of air cooled steel made of mainly bainite. Therefore, oil quenched steels, which had more various microstructure, had better strength-toughness balance compare to air cooled steels. In the impact test, fracture mode of oil quenched steels, which showed good mechanical properties, were dimple, but that of air cooled steels were cleavage.

  • PDF

열연 루퍼시스템의 퍼지 장력제어 (A Fuzzy Tension Control Method for the Coupled Looper System at the Hot Rolling Process)

  • 허윤기
    • 제어로봇시스템학회논문지
    • /
    • 제16권10호
    • /
    • pp.1006-1012
    • /
    • 2010
  • The hot rolling process ranks the highest position for production in steel making process. The hot strip manufacturing processes consist of the reheating furnace, roughing and finishing mill and coiler. The reheating furnace heats the slab. The roughing and finishing mill produce the hot strip from slab. The hot strip quality mainly depends on finishing mill, which consists of 4-high 7 stands. The looper is installed between stands and is used for controlling the strip tension by the looper angle for better material flow. It is difficult to control the strip tension with the coupled looper system from interaction between the looper angle and strip tension. Too much deviation of strip tension severely affects the poor width quality of the hot strip. It is important to control simultaneously both the looper angle and strip tension with each of their target values. This paper proposes the fuzzy tension control, which is developed to minimize the width deviation of the hot strip by maintaining the proper strip tension between stands and to achieve the stable operation of the coupled looper system. The fuzzy tension control performance is compared with the conventional PID control by experimental results.