• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.869-872
• /
• 2000

The aim of present work was to fabricate the piezoelectric composite materials of low megahertz applications such as non-destructive testing of materials. Among all the various composites, those with PZT rods embedded in Spurrs epoxy with regular periodicity (1-3 connectivity) was fabricated by dice and fill method. The fabricated size of the PZT cell were 0.18X0.18, 0.28X0.28mm$^2$, respectively. And the volume ratio of the PZT cell were 52, 64%, respectively. The resonant frequency and anti-resonant frequency of the composites were 3.5 MHz and 4.3MHz, respectively. The piezoelectric coupling coefficient were about 38 and 37% and the mechanical quality factor were about 12.7 and 22. These value were very different from these of bulk PZT Plate.

• Journal of electromagnetic engineering and science
• /
• 제12권2호
• /
• pp.161-165
• /
• 2012

The electrical properties of pig internal organs including lung, liver, heart, kidney, blood, stomach, and small intestine are measured using an open-ended coaxial probe and an improved virtual transmission-line model. The measured complex permittivities of the pig organs are compared with the given values of the corresponding human organs. A similarity between these values is confirmed. For organs such as lung, liver, heart, and kidney that have regular texture and contents, the complex permittivities are almost identical to those of the corresponding human organs. The complex permittivities of human and pig blood are also very close in value. However, relatively large deviations are observed for the cases of stomach and small intestine because the internal contents of these organs significantly affect the measured electrical properties.

• 대한디지털의료영상학회논문지
• /
• 제13권4호
• /
• pp.157-164
• /
• 2011

This test is for checking investigation about quality control of general X-ray system in clinic and hospital. We compared general X-ray system of clinic and hospital which are selected freely in the metropolitan area using PMX-III and carried out quality control. Carried out Kilovoltage test, mR/mAs output test, Light filed/Beam alignment test, Half value layer test. Most of test result are appeared that failure rates of clinic is higher than hospital one. Therefore, we should lower failure rates through regular quality control and make environment which can get high quality image.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.100-112
• /
• 1994

This tudy is to survey and analysis the water quality phase of Agricultural reservoirs through the case study of 18 reservoirs in Kyungpook Province in preparation for prevention disasters from the environmental hazards such as water pollutions. In these cases, the most hazardous pollution acts were Domestic animals excrements firstly, Human living wastge water secondly, Tourist resort sewage and Fertilize waste etc. in regular sequences. In the analysed results, pH, EC, BOD, DO, Cu, Ph, Cd were less than standard values recommended by the Environmental Authority and so they were estimated in scope of the safety value respectively. But few of factors being gradually closed with the hazardous point in the few places. At present, the hazardous environmental acts originated from the Domestic animals ex-crements, Human living waste water and Fertilize waste etc. in case the agricultural reservoirs, have to strongly be improved much better than before and prepared safety conditions for the rural living and agricultural life sciences.

• Industrial Engineering and Management Systems
• /
• 제12권2호
• /
• pp.95-102
• /
• 2013

It is difficult to determine an appropriate discount price for daily perishable products to increase profit from a long-term standpoint. Even if the discount pricing is efficient to increase profit of the day, consumers memorize the sales price and they might hesitate to purchase the product at a regular price the following day. The authors discussed the inventory clearance pricing for a single period in our previous study by constructing a mathematical model to derive an optimal sales price to maximize the expected profit by considering the reference price effect of demand. This paper extends the discussion to handle the discount pricing for multiple periods. A mathematical analysis is first conducted to reveal the properties on an objective function, which is the present value of total expected profits for multiple periods. An algorithm is then proposed to derive an optimal price for asymmetric consumers. Numerical experiments investigate the characteristics of the objective function and optimal pricings.

• Structural Engineering and Mechanics
• /
• 제3권3호
• /
• pp.245-253
• /
• 1995

A combination of Riccati transfer matrix method and finite element method is proposed for obtaining vibration frequencies of structures. This method reduces the propagation of round-off errors produced in the standard transfer matrix method and finds out the values of the frequency by Newton-Raphson method. By this technique, the number of nodes required in the regular finite element method is reduced and therefore a microcomputer may be used. Besides, no plotting of the value of the determinant versus assumed frequency is necessary. As the application of this method, some numerical examples are presented to demonstrate the accuracy as well as the capability of the proposed method for the vibration of structures.

• 약학회지
• /
• 제24권2호
• /
• pp.135-141
• /
• 1980

The crystal and molecular structure of 2-methyl-3-(N-trimethyl ammonium)phenol iodide, $C_{10}H_{16}NOI, was determined by X-ray diffraction method. The compound crystallizes in the orthorhombic space group $P_{na2}_{1}$ with a=13.327(3), b=12.496(3), C=7.227(2)A and Z=4. A total of 489 independent observed reflections were collected by the automated Four-circle diffractometer and was solved by heavy atom method and refined by anisotropic block-diagonal least-squares method to the R value of 0.04. The benzene ring is slightly distorted from regular hexagon. The I atom and 2-methyl-3-(N-trimethyl ammonium)phenol group is held together by van der Waals forces in the crystal. Intermolecular hydrogen bond is of the type O-H....I with the length 3.35.angs.. Apart from the hydrogen bonding system the molecules are held together by van der Waals forces in the crystal.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3298-3321
• /
• 2021

A lot of data hiding schemes have been proposed to embed secret data in the plain cover images or compressed images of various formats, including JPEG, AMBTC, VQ, etc. In this paper, we propose a production process of mosaic images based on three regular images of coffee beans. A primary image is first mimicked by the process to produce a mosaic cover image. A two-layer steganography is applied to hide secret data in the mosaic image. Based on the low visual quality of the mosaic cover image, its PSNR value can be improved about 1.5 dB after embedding 3 bpp. This is achieved by leveraging the newly proposed polarized search mask and the concepts of strong embedding and weak embedding. Applying steganography to the mosaic cover images is a completely new idea and it is promising.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.733-742
• /
• 2020

Taking the cylindrical float of the floating fence of a floating litter collection device as the research object, based on the shallow immersion characteristics of the cylindrical float, the Morison equation is modified, and the interaction between regular waves and the partially immersed horizontal cylindrical float is discussed in combination with scale model test. The results show that the modified Morison equation can accurately predict the wave force of the horizontal cylindrical float and reveal the influence of amplitude, immersion depth and period on the wave force of the cylindrical float. For partially immersed cylindrical floats, the wave force increases with the increase in wave height and decays with the increase in period. The positive value distribution of the wave force is larger than that of the negative direction, and the difference between the positive and negative directions is mainly affected by the immersion depth.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.1024-1031
• /
• 2012

The thermal bonding PET fabrics were produced through high temperature steaming (HTS) of low melting PET yarn as warp and composite fancy yarn containing low melting PET yarn as weft. The low melting PET yarn of sheath-core structure consisted of a regular PET in core portion and low melting PET in sheath portion. The composite fancy yarn consisted of regular PET yarn as inner part and effect part and low melting PET yarn as binding part. This study was carried out to investigate the melting behavior of thermal bonded PET fabric, the effect of HTS on the thermal bonding, mechanical properties, and dyeing properties. The melting peak of low melting PET yarn showed two melting peaks caused by sheath-core structure. Almost the entire thermal bonding of the fancy PET fabrics containing low melting PET yarn has formed at $200^{\circ}C{\times}3min$ of HTS. The tensile strength in warp and weft direction of the fancy PET fabrics slightly decreased as temperature of HTS increased. The total K/S value of the fancy PET fabrics decreased slightly to $180^{\circ}C{\times}3min$ of HTS, while increased slightly above $200^{\circ}C{\times}3min$ of HTS. The changes in the hue angle ($H^{\circ}$) of the thermal bonded fancy PET fabrics dyed with disperse dyes hardly ever happened.