• 제목/요약/키워드: regression formulas

검색결과 115건 처리시간 0.026초

New prediction equations for the estimation of maxillary mandibular canine and premolar widths from mandibular incisors and mandibular first permanent molar widths: A digital model study

  • Shahid, Fazal;Alam, Mohammad Khursheed;Khamis, Mohd Fadhli
    • 대한치과교정학회지
    • /
    • 제46권3호
    • /
    • pp.171-179
    • /
    • 2016
  • Objective: The primary aim of the study was to generate new prediction equations for the estimation of maxillary and mandibular canine and premolar widths based on mandibular incisors and first permanent molar widths. Methods: A total of 2,340 calculations (768 based on the sum of mandibular incisor and first permanent molar widths, and 1,572 based on the maxillary and mandibular canine and premolar widths) were performed, and a digital stereomicroscope was used to derive the the digital models and measurements. Mesiodistal widths of maxillary and mandibular teeth were measured via scanned digital models. Results: There was a strong positive correlation between the estimation of maxillary (r = 0.85994, $r^2=0.7395$) and mandibular (r = 0.8708, $r^2=0.7582$) canine and premolar widths. The intraclass correlation coefficients were statistically significant, and the coefficients were in the strong correlation range, with an average of 0.9. Linear regression analysis was used to establish prediction equations. Prediction equations were developed to estimate maxillary arches based on $Y=15.746+0.602{\times}sum$ of mandibular incisors and mandibular first permanent molar widths (sum of mandibular incisors [SMI] + molars), $Y=18.224+0.540{\times}(SMI+molars)$, and $Y=16.186+0.586{\times}(SMI+molars)$ for both genders, and to estimate mandibular arches the parameters used were $Y=16.391+0.564{\times}(SMI+molars)$, $Y=14.444+0.609{\times}(SMI+molars)$, and $Y=19.915+0.481{\times}(SMI+molars)$. Conclusions: These formulas will be helpful for orthodontic diagnosis and clinical treatment planning during the mixed dentition stage.

연속 철근콘크리트 슬래브 교량의 윤하중 분포폭에 관한 연구 (Wheel Load Distribution of Continous Reinforced Concrete Slab Bridge)

  • 신호상;오병환
    • 콘크리트학회지
    • /
    • 제10권4호
    • /
    • pp.135-143
    • /
    • 1998
  • 현행 AASHTO 및 AASHTO LRFD 설계기준에는 차선하중에 대한 윤하중분포폭을 차륜하중에 적용되는 윤하중분포폭의 2배를 적용하도록 규정하고 있다. 이에 반해 국내 도로교 표준시방서에는 차선하중에 대한 윤하중분포폭의 규정은 없는 실정이다. 본 연구에서는 연속 철근콘크리트 슬래브 교량에 대한 윤하중분포폭에 관한 연구를 수행하였다. 연속슬래브 교량의 윤하중분포폭에 영향을 미치는 인자들로는 지간길이, 교량폭, 단부보 및 지점조건이 있다. 이들 각 인자들에 대한 유한 요소 모델의 구성 및 해석을 통하여 연속 철근콘크리트 슬래브 교량의 합리적인 윤하중분포폭의 식을 제안하였다. 본 연구에서 제안된 윤하중분포폭의 식은 현행 도로교 표준시방서에 제시되어 있지 않은 철근콘크리트 연속 슬래브 교량의 보다 정확한 설계 및 합리적인 내하력 산정시 매우 효율적으로 사용될 것으로 사료된다.

머신러닝을 이용한 새로운 Munk-type 쇄파파고 예측식의 제안 (Development of a New Munk-type Breaker Height Formula Using Machine Learning)

  • 최병종;남형식;이광호
    • 한국항해항만학회지
    • /
    • 제45권3호
    • /
    • pp.165-172
    • /
    • 2021
  • 쇄파는 연안류, 표사이동, 충격파압, 에너지소산 등과 같은 연안에서 발생하는 다양한 물리현상과 직접적인 관계가 있으므로 항만 구조물의 설계시 반드시 고려되어야 하는 중요한 설계인자 중 하나이다. 쇄파에 대한 연구들은 쇄파가 가진 고유의 복잡성으로 인해 주로 수리모형실험을 통해 쇄파파고와 쇄파수심 등과 같은 쇄파지표를 예측하기 위한 많은 경험식이 제안되어 왔다. 하지만, 기존의 쇄파지표에 대한 경험식은 일정한 방정식의 가정하에 자료의 통계적 분석을 통해 가정한 방정식의 계수들을 결정하고 있다. 본 연구에서는 회귀 혹은 분류문제와 관련된 다양한 연구분야에 있어서 높은 예측성능을 보여주는 대표적인 선형기반의 머신러닝 기법을 적용하여 천수변형에 의해 발생하는 쇄파의 한계파고를 산정하기 위한 새로운 Munk형식의 경험식을 제안하였다. 새롭게 제안된 쇄파지표식은 단순한 형태의 다항식에도 불구하고 기존의 경험공식과 유사한 예측성능을 보였다.

지역의료보험조합의 통합대안별 재정수지 비교 (Revenue and Expenditure by Alternative Integration Proposals of the Medical Insurance Society for Self-Employed)

  • 박재용;배성권;감신
    • 보건행정학회지
    • /
    • 제5권1호
    • /
    • pp.80-105
    • /
    • 1995
  • Assuming that we introduced integration of medical insurance society for self-employed, this study was conducted to examine effects and results after the integration and to research more effective method for integration. To assess effects and results of the finacial status of 266 insurance societies after intergration, the data were obtained from "The Medical Insurance Program for Self-Employeds Statistical Yearbook in 1992". The major finding are as follows : 1. Three alternative integration proposals were made. First alternative proposal was consisted of 232 medical insurance societies, second was 187, and third was 115. 2. As the results of average number of the insured per insurance societies of medical insurance program for self-employed every alternative proposal, first was 88, 119 persons, second was 108, 576, and third was 178, 967 from 76, 576 persons of present socienties. 3. It was true that the more average size of societies increased, the more average administration expenditure per 1, 000 insured reduced. 4. The average size of societies grew bigger, the rate of general expenditure to general revenue more improved. Also, the rate of benefits to contributions was changed for better. But if not to have had correct analysis and precise preparation for integration, effects and results of integration were always not optiized. 5. According to results of simple regression formulas, it was proved that the more the average size of societies was increased, the more result was advantaged. 6. The law of majority and the economy of scale were applied in this study, and it was necessary to analyze and assess effectiveness and efficiency of integration. Therefore, when the integration of medical insurance societies for self-employeds will be performed, it must be taken into consideration. Among three alternative proposals, third was showed more effective alternative than anothe, second was presented more ineffective result than present system. To achieve more effective and efficient integration of regional medical insurance societies throughout the result of the regression formula on present cost curve, it is necessary to operate well-integrated societies and to know appropriative countermeasures of present situation of each societies. Also, for integrating regional medical insurance societies, it is necessary to continue more deep research through practical model activity and to investigate the effective size and managed method of the societies.societies.

  • PDF

Prediction accuracy of incisal points in determining occlusal plane of digital complete dentures

  • Kenta Kashiwazaki;Yuriko Komagamine;Sahaprom Namano;Ji-Man Park;Maiko Iwaki;Shunsuke Minakuchi;Manabu, Kanazawa
    • The Journal of Advanced Prosthodontics
    • /
    • 제15권6호
    • /
    • pp.281-289
    • /
    • 2023
  • PURPOSE. This study aimed to predict the positional coordinates of incisor points from the scan data of conventional complete dentures and verify their accuracy. MATERIALS AND METHODS. The standard triangulated language (STL) data of the scanned 100 pairs of complete upper and lower dentures were imported into the computer-aided design software from which the position coordinates of the points corresponding to each landmark of the jaw were obtained. The x, y, and z coordinates of the incisor point (XP, YP, and ZP) were obtained from the maxillary and mandibular landmark coordinates using regression or calculation formulas, and the accuracy was verified to determine the deviation between the measured and predicted coordinate values. YP was obtained in two ways using the hamularincisive-papilla plane (HIP) and facial measurements. Multiple regression analysis was used to predict ZP. The root mean squared error (RMSE) values were used to verify the accuracy of the XP and YP. The RMSE value was obtained after crossvalidation using the remaining 30 cases of denture STL data to verify the accuracy of ZP. RESULTS. The RMSE was 2.22 for predicting XP. When predicting YP, the RMSE of the method using the HIP plane and facial measurements was 3.18 and 0.73, respectively. Cross-validation revealed the RMSE to be 1.53. CONCLUSION. YP and ZP could be predicted from anatomical landmarks of the maxillary and mandibular edentulous jaw, suggesting that YP could be predicted with better accuracy with the addition of the position of the lower border of the upper lip.

투수성 호안의 해수유통을 고려한 유동 수치모델링 (Numerical Hydrodynamic Modeling Incorporating the Flow through Permeable Sea-Wall)

  • 방기영;박성진;김선우;조창우;김태인;송용식;우승범
    • 한국해안·해양공학회논문집
    • /
    • 제25권2호
    • /
    • pp.63-75
    • /
    • 2013
  • 평택 당진항 내항 2공구 수역은 3개의 투수성 호안으로, 그리고 내항 2공구 동측의 투기장 수역은 2개의 투수성 호안으로 둘러싸여 있다. 2010년 5월에 관측된 내항 2공구 외곽호안 내측 수역과 내항 2공구 투기장 내측 수역의 최대조차는 각각 4.70 m와 2.32 m로서, 동시에 호안 외측에서 관측된 최대조차 8.74 m의 54%와 27%에 달한다. 호안 내 외수위차와 내측 수용적 변화율간의 회귀식을 도출하고, 이 식을 이용하여 투수성 호안의 해수 유통량을 매 계산시간마다 산정하는 모듈을 EFDC 모델에 추가하여 아산만의 3차원 해수유동 수치모형을 구축하였다. 2010년 5월 13~27일의 모의기간에 대하여 주요 5개 분조($M_2$, $S_2$, $K_1$, $O_1$, $N_2$)의 합성조석과 아산, 삽교, 남양, 석문방조제의 담수방류량을 실시간으로 입력하여 해수유동을 모의하였다. 2공구 내측과 2공구 투기장 내측에서 평균고조위, 평균해면과 평균저조위의 실측치에 대한 모델치의 skill score는 96~100%로서 매우 양호한 재현율을 보인다. 투수성 호안의 해수유통을 차단한 모의결과와 비교하면, 최강유속은 주수로를 따라 0.05~0.10 m/s 증가하고, 2공구 외곽호안 외측에서 국지적으로 0.1~0.2 m/s 증가한다. 해저면 전단응력은 유속이 강한 주수로에서 0.1~0.4 $N/m_2$의 범위로 증가하고, 2공구 외곽호안 우각부 주변에서 국지적으로 0.4 $N/m_2$ 이상 증가한다. 본 연구에서 적용한 투수성 호안의 해수유통 모의기법은 대규모 투수성 호안이 유지되는 해역에서 물질의 이류 확산과 해저지형의 침식 퇴적 및 호안 주변의 국부 세굴 등을 모의 예측하는데 유용하게 적용될 수 있다.

영.유아용 식품원료의 Bacillus cereus와 일반세균 모니터링 및 제조공정 중 미생물 품질제어 (Monitoring Bacillus cereus and Aerobic Bacteria in Raw Infant Formula and Microbial Quality Control during Manufacturing)

  • 정우영;엄준호;김병조;주인선;김창수;김미라;변정아;박유경;손상혁;이은미;정래석;나미애;육동연;강지연;허옥순;윤민호
    • 한국식품과학회지
    • /
    • 제42권4호
    • /
    • pp.494-501
    • /
    • 2010
  • 영 유아용 식품에 주로 사용되는 원료에 대한 미생물 오염도를 조사한 결과, 총 10종(n=20)의 원료 중 B. cereus가 검출된 원료는 2종(n=4, 20%) 이었고, $1.02{\pm}1.36\;\log\;CFU/g$으로 나타났으며, B. cereus가 검출된 원료로는 organic brown rice powder(C사)와 mixed orgarnic vegetable powder(C사) 이었다. 미생물이 검출되지 않거나 낮게 검출된 원료는 제조공정에 살균, 분무건조, 팽화 및 압출 등의 열처리 공정이 있었다. 각 원료에 대한 일반세균수를 알아보기 위해 10종(n=20) 검사결과 4종(n=8) 검출(40%)되었으며, $3.21{\pm}3.64\log\;CFU/g$으로 나타났다. 원료에서 분리한 미생물 분포를 조사한 결과 총 11종이 분리 되었으며, 분리된 일반세균 중 76%를 차지하는 우점종은 S. paucimobilis, P. fluorescens, R. radiobactor, St. maltophilia 순으로 나타났다. 본 연구에서는 영 유아식의 미생물 안전성 확보를 위해 원료 생산공정에 살균 등의 열처리 공정이 필요하며, 미생물에 오염된 원료를 사용할 경우에도 생산공정에 드럼건조(drum surface temperature: $100-135^{\circ}C$), 분무건조(inlet air temperature: $135-204^{\circ}C$), 살균(pasteurization, UHT $130-150^{\circ}C$/1-4 sec), 미생물 저감화 방안의 제조공정을 거쳐 생산된 제품은 일반세균, 대장균군, B. cereus가 검출되지 않아 안전한 제품의 생산이 가능하였다. 또한, 영 유아용 식품을 제조할 경우 명확한 살균조건을 설정하고, 공정품의 품질평가를 거쳐야만 제품의 안전성을 확보할 수 있을 것으로 보인다.

유전자알고리즘을 이용한 강우강도식 매개변수 추정에 관한 연구(I): 기존 매개변수 추정방법과의 비교 (Parameter Estimation of Intensity-Duration-Frequency Curve Using Genetic Algorithm (I): Comparison Study of Existing Estimation Method)

  • 김태순;신주영;김수영;허준행
    • 한국수자원학회논문집
    • /
    • 제40권10호
    • /
    • pp.811-821
    • /
    • 2007
  • 현재 국내에서 사용되고 있는 Talbot, Sherman, Japanese형 강우강도식은 매개변수추정이 용이하다는 장점이 있지만, 이원환 등(1993)과 허준행 등(1999)이 개발한 강우강도식에 비하여 정확도가 떨어지며 재현기간을 고려할 수 없다는 단점이 있다. 본 연구에서는 매개변수 추정상의 어려움 때문에 널리 사용되지 않는 허준행 등(1999)이 제안한 강우강도식의 매개변수를 유전자알고리즘을 이용하여 추정하는 방법을 제시하였다. 기상청 22개 지점에서 관측된 강우자료의 지속기간별 년최대치자료를 구축한 후 지점빈도해석을 적용한 결과를 이용하여 강우강도식의 매개변수를 추정하였으며, 최적화기법으로 사용된 유전자알고리즘의 목적함수로는 평균제곱근오차(RMSE)와 평균제곱근상대 오차(RRMSE)를 사용하였다. 회귀분석에 근거한 기존의 강우강도식과 비교한 결과, 허준행 등(1999)이 개발한 강우 강도식의 매개변수를 추정하는데 있어서 RRMSE값을 최소화시키는 목적함수를 사용하는 것이 가장 정확한 결과값을 얻을 수 있는 것으로 나타났다.

엔트로피 이론 기반의 유사농도 인자 산정 (Estimation of Sediment Concentration Factor based on Entropy Theory)

  • 김영식;남윤창;전해성;전근학;추연문
    • 한국산학기술학회논문지
    • /
    • 제21권10호
    • /
    • pp.325-333
    • /
    • 2020
  • 현재 자연 하천의 유사농도의 측정에 있어서 실제 측정은 기상 조건에 영향을 받으며, 기계적 한계로 인해 하천바닥에 인접한 소류사 구간의 유사농도 측정값은 부유사 구간의 유사농도 측정값 보다 신뢰도가 낮다. 그리하여, 하천의 바닥농도는 이론식을 통해 산정되어왔으나, 기존 유사농도 계산 공식들의 바닥농도 산정값은 실측값에 비해 신뢰도가 낮고 서로 다른 공식 간의 차이는 여러 조건에 따라 천차만별이다. 따라서 하천의 바닥농도를 산정하기 위해 보다 신뢰성이 높은 공식이 요구되고 있다. 본 연구는 하천의 유사농도에 정보엔트로피이론을 적용하여 유사농도분포와 평균유사농도의 결정방법을 제시하고 평균유사농도와 바닥농도의 관계를 통해 바닥농도를 산정하는 방법을 제시하였다. 유사농도 분포의 확률은 제약조건하에 계산된 최대 엔트로피에 의해 일정한 확률분포를 나타내게 되고, 이러한 관계에 근거하여 유사농도분포, 평균유사농도 그리고 바닥유사농도 간의 관계를 유도하고 측정 표본을 통해 바닥 유사농도를 산정할 수 있다. 본 연구의 이론 검증을 위해 과거 실험의 유사농도 측정값을 사용하여 유도된 유사농도분포와 평균유사농도 공식을 적용하였으며, 유도된 두 공식의 관계를 이용하여 대표 농도변수(EN : Equilibrium N )를 도출하였다. 대표 농도변수를 통해 산정한 점 농도는 실측값과 결정계수가 평균적으로 R2=0.924의 높은 신뢰도를 보였다. 이를 통하여, 실제 하천의 부유사 구간과 소류사 구간의 유사농도의 전체 경향을 보다 쉽게 파악하고 평균유사농도와 바닥농도의 관계를 이용하여, 신뢰도가 확보된 바닥농도를 손쉽게 산정할 수 있다.

Usefulness of serum cystatin C to determine the dose of vancomycin in neonate

  • Shin, Jeong Eun;Lee, Soon Min;Eun, Ho Seon;Park, Min Soo;Park, Kook In;Namgung, Ran
    • Clinical and Experimental Pediatrics
    • /
    • 제58권11호
    • /
    • pp.421-426
    • /
    • 2015
  • Purpose: The vancomycin dosage regimen is regularly modified according to the patient's glomerular filtration rate (GFR). In the present study, we aimed to assess the usefulness of serum cystatin C (Cys-C) concentration, compared with serum creatinine (SCr) concentration, for predicting vancomycin clearance (CLvcm) in neonates. Methods: We retrospectively analyzed the laboratory data of 50 term neonates who were admitted to the neonatal intensive care unit and received intravenous vancomycin, and assessed the pharmacokinetic profiles. Creatinine clearance (CLcr) and GFR based on Cys-C (GFRcys-c) were estimated using the Schwartz and Larsson formulas, respectively. Results: The mean CLvcm (${\pm}$standard deviation) was $74.52{\pm}31.17L/hr$, the volume of distribution of vancomycin was $0.67{\pm}0.14L$, and vancomycin half-life was $9.16{\pm}17.42hours$. The SCr was $0.46{\pm}0.25mg/dL$ and serum Cys-C was $1.43{\pm}0.34mg/L$. The peak and trough concentrations of vancomycin were $24.65{\pm}14.84$ and $8.10{\pm}5.35mcg/mL$, respectively. The calculated GFR based on serum creatinine concentration (GFR-Cr) and GFRcys-c were $70.2{\pm}9.45$ and $63.6{\pm}30.18mL/min$, respectively. The correlation constant for CLvcm and the reciprocal of Cys-C (0.479, P=0.001) was significantly higher than that for CLvcm and the reciprocal of SCr (0.286, P=0.044). GFRcys-c was strongly correlated with CLvcm (P=0.001), and the correlation constant was significantly higher than that for CLvcm and CLcr (0.496, P=0.001). Linear regression analysis showed that only GFRcys-c was independently and positively correlated with CLvcm (F=41.9, P<0.001). Conclusion: The use of serum Cys-C as a marker of CLvcm could be beneficial for more reliable predictions of serum vancomycin concentrations, particularly in neonates.