• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.784-786
• /
• 1995

Variable Structure Control(VSC) scheme with sliding mode is widely used to keep a control system insensitive to parameter variations and disturbances. However, the conventional sliding mode control has the undesired phenomenon of chattering which may become a serious problem. Also the restriction of the sliding mode regime cannot guarantee the insensitivity throughout an entire response. In this paper, the sliding surfaces, which are composed of three-line segments, are used to remove the reaching phase. Also, the concept of fuzzy logic is incorporated with the sliding mode control in order to control the unknown or partially known systems effectively. The proposed method is applied to a Double-Sided MM Type LDM to show its usefulness.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2856-2861
• /
• 2008

A catalytic burner has been developed to utilize thermal energy from the fossil fuel without nitrogen oxides (NOx) emission. The burner is shaped into a mat to maximize the heating surface. Premixed combustion has been developed to be used in a closed chamber, such as a radiation type industrial dryer. The burner yields the thermal energy in the form of thermal radiation in the infrared regime, which is proved to be effective to dry organic substances for low moisture condition. Thermal efficiency including the sensible heat is better correlated to the moisture compared to the dry rate.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2003

Engine emission regulations are becoming more stringent nowadays. In cold transient regime, about 80% THC is exhausted to the atmosphere in the first 200s (US FTP cycles). Accordingly, reducing emission levels in the cold period immediately after the engine start before the catalysts reach their working temperature will be an especially critical factor in meeting more stringent regulations in the future. In this study, the total hydrocarbon quantities are measured using a Fast FID with gasoline fuel for a 4-cylinde. Sl engine, including Secondary Air Injection (SAI) system. Commercial SAI device's direction is reverse to the exhaust flow. In this study, a swirl flow type SAI system which is positioned between the exhaust manifold and exhaust port, was developed. We compared the swirl type secondary air injection with a commercial secondary air injection of .everse flow. The swirl type SAI showed better results in reducing HC by 26% than the commercial flow type SAI of reverse flow which was caused by the better mixing between the exhaust gas and the secondary air.

• Journal of the Korean Ceramic Society
• /
• v.49 no.6
• /
• pp.614-619
• /
• 2012

We investigated color and graphite layer formation on the surface of Type I tinted brown diamonds exposed for 5 minutes under a high-pressure high-temperature (HPHT) condition in a stable graphite regime. We executed the HPHT processes of Process I, varying the temperature from $1600^{\circ}C$ to $2300^{\circ}C$ under 5.2 GPa pressure for 5 minutes, and Process II, varying the pressure from 4.2 to 5.7 GPa at $2150^{\circ}C$ for 5 minutes. Optical microscopy and micro-Raman spectroscopy were used to check the microstructure and surface layer phase evolution. For Process I, we observed a color change to vivid yellow and greenish yellow and the growth of a graphite layer as the temperature increased. For Process II, the graphite layer thickness increased as the pressure decreased. We also confirmed by 531 nm micro-Raman spectroscopy that all diamonds showed a $1440cm^{-1}$ characteristic peak, which remained even after HPHT annealing. The results implied that HPHT-treated colored diamonds can be distinguished from natural stones by checking for the existence of the $1440cm^{-1}$ peak with 531 nm micro-Raman spectroscopy.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.55.1-55.1
• /
• 2011

Luminous infrared galaxies (LIRGs; $L_{IR}$ > ${10^{11}}_{Lsun}$) are the most powerful objects in the local Universe. Previous work suggested that dust re-processing of starburst and/or active galactic nuclei (AGN) activity, triggered by galaxy interactions, is responsible for their enormous infrared emission. To understand the nature of LIRGs, it is essential to determine their spectral types. Optical spectral types of 115 ultraluminous infrared galaxies in the southern sky are presented using CTIO observations. The AGN fraction is on average 50% and increases with infrared luminosity. Near-infrared spectral types of 36 LIRGs are also presented based on AKARI observations. In the sample, 12 optically elusive buried AGNs are found. To investigate the evolutionary sequence of LIRGs, star formation histories of ~6000 LIRGs in the SDSS and IRAS/AKARI matched sample are derived by comparing observed optical spectra and stellar population models. AGN-dominated LIRGs are currently massive relative to starburst-dominated LIRGs, which originates from an enhancement of star formation at intermediate-ages. For ~1100 early-type LIRGs, optical and NIR fundamental planes (FPs) are constructed. The FP of LIRGs is significantly different from that of normal early-type galaxies, but the difference is minimized in low luminous and AGN-like LIRGs. These findings support that the importance of AGN is growing as infrared luminosity increases and that LIRGs follow at least in the high mass regime the standard evolutionary scenario: starburst LIRGs evolve into AGN LIRGs and finally into normal early-type galaxies.

• Nuclear Engineering and Technology
• /
• v.41 no.10
• /
• pp.1323-1332
• /
• 2009

The IHX (Intermediate Heat eXchanger) for a pool-type SFR (Sodium-cooled Fast Reactor) system transfers heat from the primary high temperature sodium to the intermediate cold temperature sodium. The upper structure of the IHX is a coaxial structure designed to form a flow path for both the secondary high temperature and low temperature sodium. The coaxial structure of the IHX consists of a central downcomer and riser for the incoming and outgoing intermediate sodium, respectively. The IHX of a pool-type SFR is supported at the upper surface of the reactor head with an IHX support structure that connects the IHX riser cylinder to the reactor head. The reactor head is generally maintained at the low temperature regime, but the riser cylinder is exposed in the elevated temperature region. The resultant complicated temperature distribution of the co-axial structure including the IHX support structure may induce a severe thermal stress distribution. In this study, the structural feasibility of the current upper support structure concept is investigated through a preliminary stress analysis and an alternative design concept to accommodate the IHTS (Intermediate Heat Transport System) piping expansion loads and severe thermal stress is proposed. Through the structural analysis it is found that the alternative design concept is effective in reducing the thermal stress and acquiring structural integrity.

• Nutrition Research and Practice
• /
• v.1 no.4
• /
• pp.363-370
• /
• 2007

Single nucleotide polymorphism (SNP) in adiponectin gene has been associated with insulin resistance, diabetes, and cardiovascular disease (CVD). This study was performed to investigate the association of SNP 276G${\rightarrow}$T at adiponectin gene with CVD risk factors in Korean type 2 diabetes mellitus (DM) patients. The subjects were 351 type 2 DM patients visited a DM clinic in Seoul, and the patients with known CVD were excluded. The adiponectin SNP 276G${\rightarrow}$T was analyzed and dietary intakes were assessed by a Food Frequency Questionnaire. The prevalence of G/G, G/T, and T/T genotype was 47.6%, 43.3%, and 9.1%, respectively. Male subjects with T/T genotype showed significantly lower level of adiponectin and HDL-cholesterol and significantly higher C-reactive protein (CRP) level compared to G/G and G/T genotypes. In G/G genotype, protein intake was negatively correlated to body weight, BMI, and waist circumference, and there were positive correlation between carbohydrate intake and BMI, waist-hip ratio, and ApoB/apoA-1 ratio in G/T genotype. However, in T/T genotype, there was no significant association between macronutrient intakes and anthropometric and hematological values. In conclusion, CVD risk would be high in type 2 DM patients with T/T genotype, and the association of macronutrient intakes with anthropometric and hematologic factors was different among the three adiponectin genotypes. These results may imply the need for different dietary management regime according to adiponectin genotype to lower CVD complications in Korean type 2 DM patients.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.370-381
• /
• 2015

In the system of poly(vinyl alcohol) (PVA)/dimethyl sulfoxide, the refractive index of polymer was very well matched to that of solvent and thus its scattered intensity could be minimized. After adding small amount of polystyrene latex particle (nominal diameter 200 nm), diffusion behavior of only probe particle was investigated against the concentration of polymer matrix by means of dynamic light scattering. The polymer concentration dependence of its reduced diffusion coefficient was able to be analysed with the stretched exponential function of the reduced concentration $C[{\eta}]$. In very dilute concentration regime, the depletion layer kept constant but at the early semi-dilute regime of $1{\leq}C[{\eta}]{\leq}2.5$, the concentration-dependent exponent of depletion layer ${\delta}$ was appeared to be -0.8 which was very close to theoretical one of -0.85. However it was also observed at the higher concentration that its layer thickness decreased more abruptly than theoretical expectation and this phenomenon was ascribed to Oosawa type attractive interaction between adjacent latex particles.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.661-669
• /
• 1997

This paper presents a theoretical analysis for a velocity profile of fluid-granule mixed flow and a sheet erosion of an embankment having noncohesive materials due to overflow. The velocity profile were obtained using the stress-strain relationships based on a grain-inertia regime and an erosion depth was obtained using dynamic Coulomb criterion. Experiments were performed to compare with theoretical values and fairly good agreements were found. Theoretical results on velocity profiles, which can be applied to any type of velocity profiles in a fluid-granule mixed flow, showed a considerable improvement for the existing theories on a debris flow. for a design purpose, formulas and figure diagrams for obtaining a velocity profile, an erosion depth, an overflow depth and a granular discharge were proposed for given values of a flood discharge, particle properties and embankment scale.

• Tribology and Lubricants
• /
• v.35 no.6
• /
• pp.356-361
• /
• 2019

The friction and wear between machine components directly influence the energy loss and failure in various machines. Therefore, there is always a demand for finding methods to reduce friction and wear. Of the possible methods, lubrication is a widely used method for reducing friction and wear. In the case of lubrication, it is important to analyze the tribological behavior in the boundary lubrication because most of friction and wear occurs in the boundary lubrication regime. Cast iron has been regarded as a good material for industrial applications due to the excellent mechanical properties and high productivity. Especially, nodular cast iron is a material that shows better mechanical properties and wear-resistance compared with cast iron due to inclusion of spheroidal graphite. In this work, we investigated the tribological characteristics of nodular cast iron with respect to different counter parts in boundary lubrication regime. Sliding tests were conducted with SUJ2, ZrO₂, Si₃N₄ balls as counter parts using a pin-on-disk type tribotester. The results showed different friction and wear behaviors with different counter parts. The case of ZrO₂ showed the lowest wear rate in specimen and no significant ball wear. In case of SUJ2, it showed similar wear rate with ZrO₂ case in specimen and the highest friction coefficient. The case of Si₃N₄ showed the lowest friction coefficient, 33% lower than the case of SUJ2. It showed 16.9 times larger wear rate in specimen and 43% larger wear rate in ball compared to that of the SUJ2 case.