• 제목/요약/키워드: regeneration energy

검색결과 356건 처리시간 0.025초

비수용성 위생용품 사용에 따른 물재생센터 개선방안: 서울시를 중심으로 (Study on the Improvement of Water Regeneration Center by Using Non-water-soluble Sanitary Products: Focusing on the case of Seoul City)

  • 김충곤;배윤환;신현곤
    • 유기물자원화
    • /
    • 제31권2호
    • /
    • pp.39-44
    • /
    • 2023
  • 본 연구는 비수용성 위생용품의 수요와 공급이 증가하고 있는 상황에서 분뇨 및 하수처리시설의 물재생센터 처리과정중 비수용성 위생용품 관련 문제점을 분석하여 그 개선방안을 마련하고자 수행하였다. 그 결과, 물재생센터의 개선방안은 전처리설비에 주안점을 두어야 할 것이며 향후 설비교체시 하수처리시설의 경우에는 현실에 맞는 각종 제진기 설치를 제안하며, 분뇨처리시설은 조목스크린과 협잡물종합처리기 연계 또는 협잡물종합처리기 단독설치하는 방안을 제안한다. 또한 분뇨처리시설은 우선적으로 협잡물종합처리기 전단에 미세스크린을 설치하여 비수용성 물질을 분리하여야 하며 협잡물처리기의 유지관리 공간 확보가 필요하다.

경골 손상 치료에서의 침습형 저출력 레이저 치료법 및 효과 (A Method and Effect for Tibial Defect Treatment Using Interstitial Low Level Laser)

  • 이상엽;황동현;김한성;정병조
    • 대한의용생체공학회:의공학회지
    • /
    • 제37권4호
    • /
    • pp.147-151
    • /
    • 2016
  • Tibial defect, or fracture is very routine musculoskeletal case which brings fully uncomfortable and painful situations to patient. Moreover, it has long hospitalization period because of its risk of non-union. There are many studies using ultrasound, vibration, and laser for bone regeneration to figure out fast bone healing. Among them, Low Level Laser Therapy (LLLT) is already known that it is very easy to treat and may have positive effect for bone regeneration. However, LLLT has uncertain energy dose because of scattering and absorption of laser in tissue. In this study, we used interstitial LLLT to treat tibial defect in animal study. The Interstitial LLLT can overcome some limitations caused by laser scattering or absorption in tissue medium. The results were evaluated using u-CT which can calculate X-ray attenuation coefficient and bone volume of bone defect area. These results showed that interstitial LLLT may affect fast bone healing process in early phase.

액체 건조제 제습을 위한 핀튜브형 재생기의 성능인자 영향 연구 (Study on the Effect of Performance Factors on the Finned Tube Type Regenerator for Liquid Desiccant Dehumidification)

  • 장준오;박문수;강경태;이신표;이진수
    • 대한기계학회논문집B
    • /
    • 제27권7호
    • /
    • pp.845-852
    • /
    • 2003
  • Liquid desiccant dehumidification system can be used effectively to save energy consumed in air conditioning as an alternative compared with conventional air conditioning systems by reducing latent heat load. The dehumidifier and the regenerator from the heart of this system. The latent part of the cooling load is handled using liquid desiccant. In this study, the experimental regenerator has been designed to study the regeneration characteristics of the aqueous triethylene glycol(TEG) system. The performance factors of the regenerator with finned tube heat exchanger were evaluated by a series of experimental runs. The regeneration process is highly dependent on the liquid desiccant conditions, such as, temperature, concentration and flow rate. In addition, the effects of the inlet air temperature, humidity and flow rate were discussed. Data obtained are useful for design guidance and performance analysis of a regenerator, particularly for a liquid desiccant cooling system.

섬유벨트 열재생 시스템을 부착한 공기 열원 열펌프의 난방 성능 특성 (Performance of Air Source Heat Pump with a Fiber Belt Heat Regeneration System)

  • 유영선;장진택;김영중;강금춘;윤진하;이건중
    • Journal of Biosystems Engineering
    • /
    • 제25권5호
    • /
    • pp.385-390
    • /
    • 2000
  • The heat pump is one of heating and cooling systems driven by electricity using natural energy as a heat source. The heat pump system was mainly adopted to a cooling system or a refrigeration system. In regions with a large amount of electricity, it is used as a heating system or a heating and cooling system of houses, buildings and agricultural facilities. During cold weather, air source heat pumps do not work well because of some technical problems, such as frosting on evaporator coil when outside air temperature is below -5$^{\circ}C$. In this research, the heat regenerative technology was employed to eliminate the frosting on evaporator coil and improve the COP of the heat pump system. This fiber belt heat regeneration system(FBHRS) has very simple structure consisting of a geared motor and a porous fiber belt passing through alternatively between cold and warm air duct. The laboratory test showed that the heat pump system with a FBHRS yielded an impressive COP higher than 3.5 at the outside air temperature of -7$^{\circ}C$ in heating mode.

  • PDF

월악산에 분포하는 소나무(Pinus densiflora)림에서의 교란체제와 천이 과정 (Disturbance and Regeneration Process of the Pinus densiflora Forest in Mt. Worak)

  • 김홍은;권기철;정택상
    • 임산에너지
    • /
    • 제19권2호
    • /
    • pp.79-85
    • /
    • 2000
  • 월악산에 소재하여 있는 소나무림을 대상으로 조사 분석함으로써 소나무림의 숲틈형성과 재생 및 천이에 관하여 다음과 같은 결과를 얻었다. (1) 월악산 소나무림을 이루고 있는 수종들로는 교목층으로 소나무와 굴참나무가 우점하고 있으며, 중층으로는 신갈나무, 졸참나무, 쇠물푸레 등의 수종이 우점하고 있다. (2) 소나무림의 숲틈형성요인으로서 고사목의 고사유형은 입목고사형이 가장 많았다. (3) 흉고직경급별 분포를 분석한 결과 소나무림은 먼저 굴참나무림으로 바뀌다가 다시 신갈나무와 졸참나무로 천이가 진행될 것으로 판단되었다. (4) 소나무 치수는 건조한 지역에서 생성된 숲틈에서만 발견되고 있어 이러한 지역에서만 환경적 극상으로서 소나무림이 유지될 가능성을 조여주고 있었다.

  • PDF

여름철 냉방/제습시스템 중 태양열 온수기를 적용할 수 있는 액체흡수제의 재생성능에 관한 연구(실험계획법에 의한 요인효과 분석에 관하여) (Study on the Regenerating Performance of Liquid Desiccant in the Cooling/Dehumidification System able to use a Solar Water Heater in Summer(On the Analysis of Source Effect by the Design of Experiments))

  • 최광환;김보철;김영진
    • 한국태양에너지학회 논문집
    • /
    • 제22권1호
    • /
    • pp.1-8
    • /
    • 2002
  • With the possibility of hot water being able to be used as a heating source in a liquid desiccant system, an experimental apparatus for regeneration of the liquid desiccant was set up and series of experiments were conducted in a climate-controlled chamber. This study was performed to ascertain the influences of experimental factors on regenerating performance and to suggest the optimal combination of factors affecting regeneration rate. Furthermore. in order to figure out the contribution ratio of the factors on regenerating performance, a multi-way factorial design among the design of experiments was adopted. According to experimental results, the most influential factor on regenerating performance was temperature of the liquid desiccant and its contribution ratio was about 79.4%. In addition. the optimal operating combination was as follows; $60^{\circ}C$ of solution temperature, $14\ell$/min of solution flow rate, and 190m3/h of air volume.

개선된 전파형 ZVT PWM DC-DC 컨버터 (Improved Full Wave Mode ZVT PWM DC-DC Converters)

  • 김태우;김학성
    • 전력전자학회논문지
    • /
    • 제9권1호
    • /
    • pp.10-16
    • /
    • 2004
  • 본 논문에서는 공진 에너지 회생율을 최대화하여 전체적인 효율을 증가시킨 개선된 전파형 ZVT(Zero-Voltage-Transition) PWM(Pulse-Width-Modulation) DC-DC 컨버터를 소개한다. 개선된 회로는 단지 기존 컨버터의 보조스위치와 공진형 인덕터 사이에 직렬로 역공진 저지 다이오드를 추가로 달아서 모든 스위칭 소자들이 소프트 스위칭 조건에서 턴온/턴오프하여 스위칭 손실을 최소화하고, 공진 에너지를 완전히 입력으로 회귀시켜 전도손실을 절감하여 효율의 증감을 이루었다. 본 논문에서는 부스터 컨버터를 이용하여 개선된 컨버터의 동작을 분석하고, 실험결과를 바탕으로 제안된 회로의 타당성을 입증하였다.

태양열제습장치 중 제습기에서의 유량비 영향에 관한 실험적 연구 (Experimental Study on Influence of Flow Rate Ratio in a Dehumidifier with a Solar Desiccant Apparatus)

  • 최광환;파쿠르 로커만
    • 한국태양에너지학회 논문집
    • /
    • 제31권2호
    • /
    • pp.8-15
    • /
    • 2011
  • 제습기의 역할은 태양열제습냉방시스템 요소 중에서도 매우 중요하다. 본 논문은 이러한 특성에 맞추어 제작된 장치를 갖고서 제습능력에 영향을 미치는 유량비를 바꾸어 실험한 결과이다. 실험은 크기가 $40m^3$인 항온항습실을 대상으로 이루어졌으며, 향류형 제습기의 수직 높이는 0.4m로 고정되었다. 또한 충진층은 액체흡수제와의 접촉면을 넓게하기 위하여 플라스틱 충진재로 채워져 있으며, 흡수제의 온도는 빠른 변화를 보기 위하여 $15^{\circ}C$로, 농도는 40%로 고정하였다. 액체흡수제의 유량과 습도가 높은 공기의 유량을 각각 3단계로 바꾸어 실험한 결과, 풍량이 높을수록 제습기 효과는 낮아졌으나, 전체적인 제습량에서는 많아졌다. 한편, 제습기에서 액체흡수제 유량이 많을수록 제습되는 수분량이 많아졌으나, 시간의 변화에 따라 제습되는 속도는 현저하게 낮아졌다. 따라서, 향후 실험에서는 유량의 변화 폭을 더욱 확대해서 많은 실험 결과를 확보하고, 이를 모델링화 하여 높은 정확도를 예측할 필요가 있다.

동적부하 PEM 연료전지 발전기에 있어서의 수분전달 모델링 (Modeling of Water Transportation in Dynamic Load Proton Exchange Membrane (PEM) Fuel Cell Power Generator)

  • 아궁 박티아르;최광환;김영복
    • 한국태양에너지학회 논문집
    • /
    • 제31권2호
    • /
    • pp.1-7
    • /
    • 2011
  • PEM 연료전지에 있어서 수분의 균형이 연료전지의 시스템 성능에 현저한 영향을 미친다. 그래서 수분 균형은 가장 중요한 요소 중의 일부가 되었으며, 이에 관한 연구가 광범위하게 이루어지고 있다. 적절한 수분 균형을 유지하기 위해서는 적당한 멤브레인 수화작용(membrane hydration)이 필요하며, 반대로 촉매층(catalyst layer)에서의 익수(water flooding)현상이 없어져야 한다. 따라서 이와 같은 동적 상태에서 PEM 연료전지 내의 수분 균형을 유지하기 위해서는, 고도의 동적 수분 조정 기술이 확보되어야 한다. 현재의 연구는 이러한 특성을 고려하여 PEM 연료전지에서 동적부하 상태에서의 수분 이동에 관한 일차원 해석 모델에 관한 것이다. 금번 모델링의 결과, 양극촉매층(CCL, cathode catalystlayer)에서의 수분 상태는 거의 포화 단계에 이르고 있음을 보여주고 있으며, 이 모델링은 연료전지가 작동되는 동안의 CCL에 나타나는 수분의 양상을 예측하는데 활용될 수 있다. 본 논문에서는 수분 이동 모델이 국제규격에 따라 다양한 수송기관이 가동될 때, 동적부하 상태에서 서로 다른 차이점을 발견하기 위한 시뮬레이션 결과에 초점이 맞추어져 있다. 이 모델링을 적용한 결과, 수분 포화도가 상태에 따라 상이하게 나타남을 알 수 있었고, 또한 정적 수분 조절 요소에 따라 최적 상태가 모든 동적 분포에 따라 달라짐을 알 수 있었다.

억새(Miscanthus sinensis) 성숙 종자로부터의 캘러스 유도 및 식물체 재분화 체계 확립 (Establishment of Callus Induction and Plant Regeneration System from Mature Seeds of Miscanthus sinensis)

  • 조준형;변지희
    • 한국자원식물학회지
    • /
    • 제24권5호
    • /
    • pp.628-635
    • /
    • 2011
  • 본 연구는 최근 한방자원, 사료자원, 바이오에너지 자원 등 다양하게 이용되는 국내 자생 억새(Miscanthus sinensis)의 대량생산 및 신품종 개발을 위한 조직배양체계 확립을 위해 수행되었다. 이를 위해 억새 완숙종자로부터의 캘러스 유도와 재분화를 위한 식물생장조절제의 적정농도를 규명하였다. 억새의 성숙종자유래 배발생 캘러스 유도를 위해 2,4-D, IBA, NAA를 1~10 $mg{\cdot}L^{-1}$의 농도로 단용 처리한 결과, 5 $mg{\cdot}L^{-1}$ 2,4-D 처리에서 가장 높은 85.3%의 캘러스 유도율과 캘러스의 증식을 보였으며 조직배양 과정 중 갈변화율도 가장 낮았다. 또한, 캘러스의 재분화를 위해 옥신인 NAA와 Kinetin, 2-iP, 또는 BAP 등의 사이토키닌을 혼용 처리한 결과, 각각 19.0%~59.0%, 23.0%~67.3%, 14.7%~83.7%의 재분화율을 보여 NAA와 BAP의 혼용 처리구가 NAA와 Kinetin 또는 2-iP와 혼용 처리구보다 식물체 재분화에 효과적이었다. 특히 3 $mg{\cdot}L^{-1}$ NAA와 5 $mg{\cdot}L^{-1}$ BAP 혼용 처리된 배지에서의 재분화율이 83.7%로 가장 높게 나타났으며, 캘러스 당 재분화 식물체 개수도 5.5개로 동일농도의 2-iP 또는 Kinetin 혼용 처리 시 2.1 및 2.0개보다 많았다. 본 연구결과 억새 성숙 종자로부터의 배발생 캘러스 유도에는 5 $mg{\cdot}L^{-1}$ 2,4-D가 그리고 캘러스의 재분화에는 3 $mg{\cdot}L^{-1}$ NAA와 5 $mg{\cdot}L^{-1}$ BAP 혼용 처리가 가장 효율적이었다. 본 연구를 통해 확립된 조직배양체계는 억새의 대량생산 및 신품종 개발에 유용할 것으로 판단된다.