• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.14-19
• /
• 2012

The Helium cooled ceramic reflector(HCCR) test blanket module(TBM) has been designed and developed to participate the ITER(International Thermonuclear Experimental Reactor) test blanket program in Korea. The TBM was one of the main objectives for developing ITER for proving the tritium self-sufficiency and the heat transfers to produce the electricity with the breeding blanket concept. Among the TBM components, the first wall(FW) was the most important component in safety since it was directly faced a high level of a heat and fast neutrons from the plasma side and could protect the others components inside TBM. In this paper, the FW has been designed through the thermo-mechanical analysis considering ITER operation conditions. With the developed simple models, the stress limit analysis based on RCC-MR code which is the nuclear power plant design codes in France was evaluated for the allowable design criteria. The results showed that the designed FW model satisfied $1.5S_m$ or $3S_m$ of the allowable stress($S_m$) in RCC-MR code at the maximum stress region in the FW.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.91-97
• /
• 2017

Purpose: Various studies on a light shelf are in progress, but it has the problem of glare occurrence. The present study suggested a diffusion film as the method for resolving the glare problem, and aimed to establish light shelf-related basic data by conducting the performance evaluation of a light shelf depending on the installation position of the diffusion film. Method: To carry out the light shelf performance evaluation depending on the diffusion film installation position, three cases were established: no diffusion film installation (Case 1), diffusion film installation on the reflector (Case 2), and diffusion film installation on the upper glass surface of the window for light shelf installation (Case 3); and the energy reduction performance, luminance, and luminance contrast were analyzed based on a testbed. Result: The conclusions of this study are as follows. 1) When the diffusion film was applied, the amount of light introduced through the light shelf decreased, and the average indoor illumination decreased accordingly. 2) For Case 3, the lighting energy reduction performance was identical to the lighting energy reduction efficiency of the existing light shelf; and for Case 2, it was found to be inappropriate as the lighting energy consumption increased compared to that of the existing light shelf. 3) The analysis of the glare for the cases established in this study showed that the luminance contrast was low for Case 3, and thus the glare problem could be minimized. 4) The specific angle of the light shelf could induce the glare problem by increasing the luminance depending on the external condition. 5) Based on the aforementioned contents, the installation position of the diffusion film for improving the lighting performance and glare problem of the light shelf was found to be the upper glass surface of the window for light shelf installation.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.255-258
• /
• 2001

This paper proposes a new structure of a fiber-optic illuminator using high Lux RGB LEDs. A simulation program, LightTools, is used for the verification of the model. An LED mounting holder containing 74 RGB LEDs is used as a basic part of its light collector. Since the light output level of current LED lamps is still far below that of conventional lamps, it is required to double the right output in order to replace a conventional illuminator with a halogen lamp. An additional cone-type reflector is installed hemispherically and the resulting structure comprises a basic collector unit. To further increase the output two collector units are connected together in series. As the result, the light output increases nearly 70% with compared to a collector with a basic structure. The system efficiency can be increased more than 8 times with compared to conventional one.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.3-7
• /
• 2007

장수명, 고효율의 광원 개발이 중요한 만큼 조명기구의 개발 또한 중요하다. 무전극 램프에 적용할 수 있는 설계 법을 기본으로 램프 취부 방식의 변경, 반사갓 구조의 변형 등을 통해 새로이 개발된 200W급 무전극 형광램프 전용의 반사갓을 설계하였다. 사이즈를 최소화하여 비교적 콤팩트한 반사갓을 설계하였고, 둥근형, 전구형 램프의 적용범위에 맞는 배광을 만족시킬 수 있는 다양한 조명기구의 개발이 가능하다는 것을 다시 한 번 입증하였다.

• Journal of electromagnetic engineering and science
• /
• v.8 no.2
• /
• pp.64-69
• /
• 2008

In this paper, we have proposed the pattern adjustable base station antenna for WCDMA applications. The proposed antenna consists of an omni-antenna(sleeve monopole) and two movable reflectors. The two reflectors can be controlled by mechanically and used to adjust the horizontal pattern of the base station antenna. The antenna was designed, fabricated, and measured. The antenna covers the entire WCDMA band for VSWR<1.4. The measured antenna gain is more than 15 dBi over the operating frequency range. By changing the angle (a) and the distance (d) of the antenna, the pattern adjustment of the proposed base station antenna is found to be possible.

• Nuclear Engineering and Technology
• /
• v.38 no.5
• /
• pp.455-458
• /
• 2006

The HANARO reactor has a vertical hole for a cold neutron source (CNS) in the heavy-water reflector tank, i.e., the CNS hole, which was considerably deformed during its welding to the horizontal cold neutron (CN) beam tube. This paper presents an investigation of the form of the CNS hole for the optimal design of the a vacuum chamber for the CNS. In addition, the installation method of the vacuum chamber into the CNS hole for minimizing the water thickness between the vacuum chamber and the nose of the CN beam tube is proposed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.207-211
• /
• 2015

In this paper, we proposed a broadband planar Yagi-Uda dipole antenna with dual tapered balance and unblance (balun) by CPW-fed to CPS. This antenna consisted of driver, three directors, dual tapered balun and CPS-fed to CPS. The fed structure of CPW-fed to CPS had a benefit points much simpler than other planar Yagi-Uda antennas and provided design more flexibility in arranging the reflector. The proposed antenna is introduced dual tapered balun to improve the impedance matching. It balun is inserted between the CPW-ground and the CPS. The proposed antenna is exhibited the bandwidth of 4.78 GHz (1.94~6.72 GHz) (S11 < -10 dB) and the gain of 4.9~7.2 dBi within that bandwidth. This antenna will applicate wireless communication.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.141-144
• /
• 2004

기존 광원은 그 배광이 광원을 중심으로 볼 때 사방으로 퍼져 나가며, 이를 이용해 적절한 형태로 바꾸는 것은 주로 반사판의 역할이다. 그러나 LED는 기본적으로 배광이 좁으며, 이를 적절하게 변경시키는 것은 반사판이 아니라 굴절과 확산이 된다. 또한 LED는 그 자체만으로 크기가 작아 점광원으로 볼 수 있지만, LED에서 발광하는 빛은 chip에서 epoxy dome으로 직접 굴절되어 나가는 refracted ray와 reflector cup에 의해 반사되어 다시 epoxy dome에서 굴절되어 나가는 reflected-refracted ray로 이루어지기 때문에 정확히 말하면, 빛은 한 점에서 발광한다고 간주 할 수는 없다. 따라서 본 논문에서는 LED에 대한 최적의 refractor 설계를 위해 점광원으로 간주 할 수 있는 최적의 근사 발광점을 선택하여 refractor를 설계하고자 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.161-164
• /
• 2006

This paper introduces a preliminary work for the design of a mini-dish cluster system for power general ion. Each mini-dish (typically has a 20 to 30cm in diameter) is designed with a simple parabolic profile, concentrating sun light (after the glass glazing cover to avoid dust deposition on the reflector and facilitate cleaning) onto a centrally located small plane(or concave) mirror which is placed on the bottom side of the transparent glass cover. The mirror with a mini-dish concentrator is designed to focus beam radiation onto a focal point before it enters a bundle of optical fibers connected to a remote receiver for power generation different options are considered In designing a mini-dish concentrator to maximize its effectiveness for the collection and use of solar energy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.231-240
• /
• 1999

The most important thing to be considered in designing stop lamps for automobiles is to satisfy the photometric requirement in various countries and achieve the equal image. To meet these requirements, parabolic reflector and fish-eye optics has been widely applied. The form of the embodied optic is most important in satisfying the photometric requirement and achieving the equal image because the impact of fish-eye optic is decisive. In this study, a series of researches has been performed to optimize of the fish-eye optic by analyzing beam pattern through the photometric simulation based on CATAI program. The optimized results have been shown to meet the various photometric requirements including non dazzling condition considering the following car. The methodology of this study is excepted to influence the development procedure of light system. The time and cost for the system development would be greatly saved by suing this simulaion technique.