• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1078-1082
• /
• 2005

In this study, the run-up height and reflection property on slopes of S-berm and smooth slopes breakwaters are investigated by laboratory experiment. The run-up height analyzed the effect of reflection coefficient, surf similarity parameter. Measured reflection coefficients of smooth slope breakwaters are compared with those of S-berm breakwater with variable widths. In general, measured coefficients of S-berm breakwaters are smaller than those of smooth slope breakwaters.

• 대한공업교육학회지
• /
• 제39권2호
• /
• pp.1-18
• /
• 2014

본 연구에서는 중등단계 직업교육에서 활용되고 있는 기존 발명 지식재산 관련 교과서를 대상으로 '발명 지식재산 핵심 학습 요소'의 반영 비율에 대한 편성 실태를 분석하고, 앞으로 중등단계 직업교육에서 요구되는 적정한 발명 지식재산 교육내용별 편성 비율을 제안하고자 하였다. 이를 위해서 현재 특성화고 및 마이스터고에서 사용되고 있는 발명 지식재산 교과서의 교육내용에 '어떤 종류의 발명 지식재산 핵심 학습 요소가, 얼마나 있는지와, 향후 어떤 학습 요소를 얼마나 편성하는 것이 바람직한가'를 연구 문제로 설정하였다. 이를 해결하기 위해서 내용분석 방법을 활용하여 발명 지식재산 교육내용의 반영 실태를 분석하고, 델파이 조사로 앞으로 요구되는 발명 지식재산 교육내용별 반영 비율을 제시하였다. 본 연구를 통해서 얻어진 결과를 제시하면 다음과 같다. 첫째, 중등단계 직업교육에서 활용되고 있는 기존 발명특허 인정도서에 포함된 발명 지식재산 핵심 학습 요소를 분석한 결과 모든 핵심 학습 요소가 교과서에 분포하고 있었으나 일부 교과서에서는 D(문제 해결과 활동)영역이 집중되어 있는 경향이 있었다. 둘째, 중등단계 직업교육에서 활용되고 있는 발명특허 인정도서에 제시되어 있는 발명 지식재산 교육내용의 영역별 반영 비율을 분석한 결과 대부분의 교과서가 창출영역에 치중되어 있는 경향이 있었으며, 일부 교과서에서는 보호영역과 활용영역을 다루고 있었다. 그러나 대체적으로 활용영역에 대한 반영 비율이 미흡한 실정이었다. 성취유형별로는 모든 교과서에서 지식영역이 주를 이루고 있었다. 또한 발명특허기초, 발명과 문제해결, 발명과 디자인 교과서에서만 기능영역을 일부 다루고 있었으며, 태도영역은 대부분의 교과서에서 없거나 미흡하게 다루고 있었다. 셋째, 전문가 델파이 조사를 통해 얻어진 중등단계 직업교육에서 요구 되는 발명 지식재산 교육 핵심 학습 요소 영역 중에서 D(문제 해결과 활동) 17.7%, E(발명 융합 지식) 2.9%, K(특허출원) 6.9%, L(특허정보 조사) 9.6%를 줄여야 하는 것으로 나타났다. 발명 지식재산 교육내용 중에서 발명 소양영역 3.1%, 지식재산 창출영역 4.5%, 지식재산 보호영역 10.6%를 줄여야 하고, 지식재산 활용영역은 17.7%를 늘려야 하는 것으로 나타났다. 또한 성취유형의 적정 반영 비율은 지식영역은 52%를 줄여야 하고, 기능영역 32.3%, 태도영역 19.6%를 늘려야 하는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.392-399
• /
• 2005

Shear modulus (or rigidity) of dam material is an important parameter which can be directly associated with the deformation of dam. Seepage or leakage of water can cause the defects or cracks of dam body. The existence of cracks and rigidity of dam body are decisive information for the estimation of dam safety. Rigidity of material is mainly determined from S-wave velocity and the defects of dam body can be detected by seismic reflection survey. Therefore, seismic reflection survey will be a desirable method which can give a solution about dam safety problem. Among various physical properties of dam body, S-wave velocity is the most important information but it is not easy to get the information. In this study, diverse measuring techniques of S-wave reflection survey were attempted to get the information about S-wave velocity of dam body. Ultimately, S-wave velocity could be estimated by the analysis of SH reflection events which can be easily observed in shot gather data obtained from SH measuring technique. Meanwhile, P-wave reflection survey was also performed at the same profile. P-beam radiation technique which can reduce the surface waves and reinforce the P-wave reflection events was applied for giving a help to analyse P-wave velocity. In the end, P-and S-wave velocity, Vs/Vp, Poisson's ratio distribution of the vertical section under the profile could be acquired.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.1-11
• /
• 1997

Austomated visual inspection(AVI) capability has become an important key component in the automated manufacturing system. In such a visual inspection system an intensity(or color) image of a scene is quickly affected by optical property of objects, condition and roughness of surface, lens and filters, image sensor property and lighting system. In particular, the lighting system disign is the most important factor, since it affects overall performance of the visual system. For fast and cheap automated visual inspection system it is important to obtain the good image quality which results from careful attention to the design of the lighting system. In this paper, the lighting subsystem of AVI system is analysed for the inspection of printed circuit board(PCB) patterns. The spectral reflectance of materials, which are composed of PCB, is measured for choosing the light source. The reflection property is theoretically obtained by a reflection model and also obtained by experiments which measure intensity with varying the viewing direction of image sensor and the lighting direction of illuminator. The illumination uniformity of a ring-type illuminator. The lighting system is designed based upon the experimental results and theoretial analysis.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.199-200
• /
• 2008

In this paper, we researched optical characteristics of a holographic optical security system using a reflection recording material and optical random phase mask. The system have the property of optical security key with the phase mask. Also, a reflection recording geometry can reduced a size of the reconstruction system because a input beam to reconstruct a holographic image and a diffraction beam are the same side on the material.

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.262-269
• /
• 2003

An approach to compute characteristic curves such as section curves, reflection characteristic lines, and asymptotic curves on a surface is introduced. Each problem is formulated as a surface-plane inter-section problem. A single-valued function that represents the characteristics of a problem constructs a property surface on parametric space. Using a contouring algorithm, the property surface is intersected with a horizontal plane. The solution of the intersection yields a series of points which are mapped into object space to become characteristic curves. The approach proposed in this paper eliminates the use of traditional searching methods or non-linear differential equation solvers. Since the contouring algorithm has been known to be very robust and rapid, most of the problems are solved efficiently in realtime for the purpose of visualization. This approach can be extended to any geometric problem, if used with an appropriate formulation.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.515-521
• /
• 2010

In this research, we were prepared the glazed ceramic samples by the change of the pigment content and investigated to reveal the standardized color. The chemical composition of the pigment was analyzed using a ICP-OES. XRF mapping and UV-Vis spectroscopy were used to evaluate the color property and surface homogeneity. The color development was observed as a result of analyzing the pigment content and change of the color. The pigment content and the spectral reflection showed the relation of the inverse proportion and the standardized color which could be revealed through analysis data.

• 소음진동
• /
• 제4권3호
• /
• pp.295-305
• /
• 1994

The reflection coefficient of a material at oblique incidence is measured in a free field. The sound pressure distributions are measured at discrete points on two measurement lines and then decomposed into plane wave components by using spatial Fourier transform. The inciedent and reflected plane wave components are obtained from a set of "decomposition equations" of which uses the plane wave propagation theory. Numerical simulations and experiments have been performed to see the effect of finite size of measurement area. To reduce this effect, a window fuction has been performed to see the effects of finite size of mesurement area. To reduce this effect, a window function has been proposed and its effect on the measurement of sound absorbing material property has been studied as well. The reflection coefficient obtained by this method is compared with those obtained from other methods; 2-microphone method in a duct and an expirical equation of which determines the characteristic impedance .rho.c and propagation constant k of a material from flow resistance information.formation.

• 한국조명전기설비학회지:조명전기설비
• /
• 제13권2호
• /
• pp.133-133
• /
• 1999

Average illuminance and luminance can be calculated by graphical methods to a certain extent but to calculate for a wide place a suitable software is needed. Softwares suitable for this purpose have been already developed in foreign nations, but the appropriate softwares for domestic use have not been developed. Therefore a program is developed which is executable in Hangul Windows. The softwares LAPRoad, is developed to calculate luminance and illuminance distribution of road surface, as well as average luminance and illuminance, overall uniformity, longitudinal uniformity, threshold increment veilling luminance and glare. And an apparatus that measures road surface reflection properties is developed. Because the road surface reflection properties is very important in luminance calculation, then concrete road surface reflection properties were measured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.526-530
• /
• 2004

We report the space charge and the surface potential of the interface between metal and CuPc according to isotropic property and different metal by measuring the microwave reflection coefficients $S_{11}$ of copper(II)-phthalocyanine(CuPc) thin films by using a near-field microwave microscope(NSMM) in order to understand. CuPc thin films were prepared on gold and aluminium substrates using a thermal evaporation method. Two kinds of CuPc thin films were prepared. One was deposited on preheated substrate at $150^{\circ}C$ and the other was annealed after deposition by using thermal evaporation methods. The microwave reflection coefficients $S_{11}$ of CuPc thin films were changed by the dependence on the heat treatment conditions. By comparing reflection coefficient $S_{11}$ we measured electrical conductivity of CuPc thin films and studied this results with respect to the surface potential and space charge of the interface between metal and CuPc thin films.