• 한국해안해양공학회지
• /
• 제13권3호
• /
• pp.254-261
• /
• 2001

장주기파가 깊은 바다에서 수심이 급격히 감소하는 대륙사면을 지나 대륙붕 위로 전파해 들어오는 경우 육지에서 반사된 파가 대륙사면에서 외해로 전파해 나가지 못하고 재반사되어 들어오기 때문에 육지 쪽에서 커다란 수위진동을 일으키는 것은 잘 알려진 사실이다. Liu(1986)는 반원형 외해 경계를 따라 수심의 불연속이 존재하는 지형을 가정하여 이러한 현상을 해석하였으나 그의 해석해에는 오류가 있었다. 본 논문에서는 직선해안 및 직사각형 항만에 대한 Liu(1986)의 해석해를 수정하고, 이를 정 등(1998)의 확장형 완경사방정식에 기초한 Galerkin 유한요소 모형에 의한 결과와 비교하여 확인하였다.

• 한국해양공학회지
• /
• 제34권4호
• /
• pp.245-252
• /
• 2020

Wave run-up is an important phenomenon that should be considered in ocean structure design. In this study, the wave run-up of a surface-piercing circular cylinder was calculated in the time domain using the three-dimensional linear and fully nonlinear numerical wave tank (NWT) techniques. The NWT was based on the boundary element method and the mixed Eulerian and Lagrangian method. Stokes second-order waves were applied to evaluate the effect of the nonlinear waves on wave run-up, and an artificial damping zone was adopted to reduce the amount of reflected and re-reflected waves from the sidewall of the NWT. Parametric studies were conducted to determine the effect of wavelength, wave steepness, and the draft of the cylinder on the wave run-up of the cylinder. The maximum wave run-up value occurred at 0°, which was in front of the cylinder, and the minimum value occurred near the circumferential angle of 135°. As the diffraction parameter increased, the wave run-up increased up to 1.7 times the wave height. Furthermore, the wave run-up was 4% higher than the linear wave when the wave steepness was 1/35. In particular, the crest height of the wave run-up increased by 8%.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2004년도 학술발표논문집 Proceedings of Coastal and Ocean Engineering in Korea
• /
• pp.138-145
• /
• 2004

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2009년도 발표 논문집 제18권
• /
• pp.224-227
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• 제22권3호
• /
• pp.330-332
• /
• 2001

• 한국해안해양공학회지
• /
• 제19권5호
• /
• pp.446-456
• /
• 2007

본 연구에서는 Lynett and Liu(2004a, b)에 의해 유도된 2층 Boussineaq방정식을 이용하여 일정수심상의 규칙파 조건에서 직립벽을 따른 연파를 해석하고, 수리모형실험결과 및 포물형근사식에 의한 해석결과와 비교하였다. 두 가지 수치모형에 의한 해석결과는 수리실험결과와 비교적 잘 일치하였으나, 입사각이 증가할수록 Boussinesq 모형이 포물형모형보다 우수한 결과를 주는 것으로 나타났다. 특히 파랑의 비선형성에 의한 고차 조화성분의 발생은 Boussinesq모형에서만 관찰되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.169-172
• /
• 2002

When a plane shockwave reflects ken a concave wall, it is focused at a certain location, resulting in extremely high local pressure and temperature. This focusing is due to a nonlinear phenomenon of shock wave. The focusing phenomenon has been extensively applied to many diverse folds of engineering and medical treatment as well. In the current study, the focusing of shock wave over a reflector is numerically investigated using a CFD method. The Harten-Yee total variation diminishing (TVD) scheme is used to solve the unsteady, two-dimensional, compressible, Euler equations. The incident shock wave Mach number $M_{s}\;of\;1.1{\~}l.3$ is applied to the parabolic reflectors with several different depths. Detailed focusing characteristics of the shock wave are investigated in terms of peak pressure, gasdynamic and geometrical foci. The results obtained are compared with the previous experimental results. The results obtained show that the peak pressure of shock wave focusing and its location strongly depend on the magnitude of the incident shock wave and depth of parabolic reflector. It is also found that depending up on the depth of parabolic reflector, the weak shock wave focusing process can classified into three distinct patterns : the reflected shock waves do not intersect each other before and after focusing, the reflected shock waves do not intersect each other before focusing, but intersect after focusing, and the reflected shock waves intersect each other before and after focusing. The predicted Schlieren images represent the measured shock wave focusing with a good accuracy.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1984년도 추계학술발표회 논문집
• /
• pp.96-99
• /
• 1984

In this study, the underwater acoustic images were obtained by ultrasonicwave. The experiment was performed in the anechoic watertank, using a passive sonar array for one and two sound source respectively by X-Y scanning technique. The receiving array was consist of 8 disc type transducers with 1.5cm diameter at 25KHz resonance frequency. The scanned data were processed by the FORTRAN IV algorithm for the reconstruction of image, and the image had some noise due to the surface reflected waves. As the result, it was found that the acoustic imaging by electrical deflection and dynamic focusing technique is applicable to SONAR with the suppression of surface reflected wave.

• Bulletin of the Korean Chemical Society
• /
• 제18권10호
• /
• pp.1071-1075
• /
• 1997

Detonation characteristics of acetylene were studied behind reflected shock waves in the temperature range 800-1350 K by monitoring OH emission and pressure profiles. For a comprehensive measurement of ignition delay time, the mixture composition was varied in a wide range of Ar mole % was varied from 0.625 to 2.5 in stoichiometric ratio of C2H2-O2-Ar. A computer simulation study was also performed to elucidate the important elementary steps determining ignition behavior. The 33-reaction mechanism provides a good agreement in delay time between the observed and the calculated ones.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1997년도 제8회 학술강연회논문집
• /
• pp.121-129
• /
• 1997

Wave propagation was studied for an unidirectionally reinforced composite materials. The velocities, the particle directions and the amplitudes of reflected and transmitted waves were obtained. This analysis involves an immersion C-scan procedure. Snell's law was modified to get the velocities of waves. This analysis could be applied to the detection of flaws in a transversely isotropic composite motor case.