• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.366-369
• /
• 2006

Multi Housing design has not considered the remodeling even at the beginning of the construction. This severely hindered systematic maintenance, providing fundamental causes of consuming society. In general, in about 20 years when the buildings become too old, they are brought down or removed with a trail of waste left behind. In addition, since the current remodeling or future remodeling type is a general remodeling that leaves only a frame, some question the role of the remodeling as a solution to the reconstruction from economically and environmentally efficient aspects. This study intends to find a solution for long-life span multi-family housing design, promoting sequential remodeling by stating the life cycle of components. Problems were identified by analyzing joints, design and construction of multi-family housing based on the previous researches. Conclusion from characterization of the design plan according to joint parts can be summarized as the following firstly, the problem of the wet was seen in joints between the structure and a finishing materials and ones between separate finishing materials. Secondly, the problem of overlap was frequently seen in joints between the structure and a door/window, ones between a door/window and a finishing materials, and ones between a finishing materials and an electrical/mechanical device.

• Earthquakes and Structures
• /
• v.7 no.2
• /
• pp.201-216
• /
• 2014

In this paper the vulnerability of the confined masonry buildings is evaluated analytically. The proposed approach includes the nonlinear dynamic analysis of the two-story confined masonry buildings with common plan as a reference structure. In this approach the damage level is calculated based on the probability of exceedance of loss vs a specified ground motion in the form of fragility curves. The fragility curves of confined masonry wall buildings are presented in two levels of limit states corresponding to elastic and maximum strength versus PGA based on analytical method. In this regard the randomness of parameters indicating the characteristics of the building structure as well as ground motion is considered as likely uncertainties. In order to develop the analytical fragility curves the proposed analytical models of confined masonry walls in a previous investigation of the authors, are used to specify the damage indices and responses of the structure. In order to obtain damage indices a series of pushover analyses are performed, and to identify the seismic demand a series of nonlinear dynamic analysis are conducted. Finally by considering various mechanical and geometric parameters of masonry walls and numerous accelerograms, the fragility curves with assuming a log normal distribution of data are derived based on capacity and demand of building structures in a probabilistic approach.

• Korean Institute of Interior Design Journal
• /
• v.23 no.6
• /
• pp.33-41
• /
• 2014

Regeneration of abandoned industrial facilities can heighten the availability through potential values that cannot be found in newly-built buildings and through the sense of overscale space. Furthermore, backward regions can be activated by assigning their identity and establishing social-cultural infrastructures. The aim of the present study is to analyze and integrate of characteristics of design expression based on a case of creative space in Shanghai. A research on the creative space in Shanghi designedly proceeded according to government's extensive administrative support and policy. We keep appearances of industrial buildings as close as possible to their original condition, thereby revealing symbolism and forming unique characteristics that distinguish them from those of other areas. While keeping the shape characteristics of the bridge8, M50, Red Town, 2577 Greative Garden and 1933 Shanghai, we designed spaces in terms of spacial variability, oneness, accessibility and continuity and activated areas by inducing residents' participation and fostering art and cultural oriented facilities. These characteristics of design expression are factors to be considered in regenerating abandoned industrial facilities internally and hopefully they are used as a reference of design plan.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.19 no.1
• /
• pp.59-66
• /
• 2013

Purpose: Although Computerized Tomography is one of the most useful diagnosis devices and Frequency of use by all kind of patient is higher than other device, it can be hardly to find out adequate data to planning of Computerized Tomography Unit. So questions have been raised about how to organize the unit. Methods: In order to suggest architectural guideline of Computerized Tomography Unit, expert interview, field survey and analysis to the floor plan have been conducted in this article. The area calculation was based on center line. Results: This article suggests a number of the guideline and the example of the planning which contains how to design Computerized Tomography Unit. Especially, in the case of the example on the planning, main points of the guideline is reflected. Implications: The result of this survey would be useful as a reference when the architect tries to design Computerized Tomography unit.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.186-194
• /
• 2012

One hand shopping center provides a public space for people, the other hand it is a place for commercial purpose. Although it gives an entertainment, eating and shopping places to people nowaday, owners and tenants aim to make profit from it. According to this demand designers should plan a shopping center for a comfortable place for eating, shopping and playing and they make shops and retails to increase sales by exposing those to more people at the same time. For successful shopping center architects are requested an approach with commercial strategy that shopping center raises exposure of retails and makes stay costumers longer and visit more frequently. Recently space is regarded as a mean of marketing, so-called "place marketing", because it can influence on brand image and improves the image of product. Therefore, it need to be approached with commercial consideration. Analyzing the armature this study will take a look at spatial strategies in shopping centers which especially the Jerde Partnership, one of influential firms on commercial space, designed. And it will examine how spatial strategies can be applied to commercial strategies in relation to customer information process(exposure-attention-interest-comprehension-memory) which marketers are using in advertisement for marketing and what kind of role spatial strategies can be. This study is to be basic considerations when a shopping center project will be planned.

• KIEAE Journal
• /
• v.15 no.1
• /
• pp.155-160
• /
• 2015

The annual average of energy sources is continuously increasing at a rate of 5.8%, and particularly, the power generation proportion of new/renewable energy is increasing significantly. Furthermore, South Korea has established a national energy master plan for 2008-2030 and is aiming at obtaining approximately 11% of total energy production from the wind turbine sector. Although offshore wind turbines are similar to wind turbines installed on land, they require materials with excellent dynamic properties and durability to prevent damage due to seawater at the lower parts and connecting parts. The lower parts of wind turbines are submerged in seawater, and the upper and lower parts are connected by filling the connecting part with grout. This paper describes the test results of the process of determining the mix ratios to develop ultra-high grout for offshore wind turbines. There is virtually no relevant technology regarding grout for offshore wind turbines in South Korea that can be referenced for the process of determining the mix ratios. Therefore, tests were conducted for determining compression strength, elastic modulus, flexural strength, density, constructability (floor test), and early strength by referencing a high-performance grout produced in South Korea, and the mixing process for achieving the goal strengths was described using the Korean Industrial Standards (KS) as the reference.

• Journal of Applied Reliability
• /
• v.15 no.4
• /
• pp.248-255
• /
• 2015

Purpose : The purpose of this research is to develop the optimized method and process in the reliability-growth target setting, especially for complex and repairable system (or products) such as vehicle and airplane, construction equipment. Method : A reliability-growth test plan specifies a scenario to achieve the planned reliability value (or reliability target). The major elements in test planning are reliability-growth starting time and reliability level at that time, reliability-growth rate and reliability-growth target. All of them except a reliability target can be referred to the previous development data and reference researches. The reliability target level is directly influencing to test period (or time) which is related to test and warranty cost together. There are a few researches about the reliability target setting method and but showing the limitations to consider the views of engineering, business and customer together. There is no research how to handle the target setting process in detail. Result : We develop the optimized method and systematic process in reliability target setting with considering such views. This research also establish the new concept as production capability which means company (or supplier) capability to product its products. Conclusion : In this research result, we apply the new method to a few projects and can set the reasonable test planning. The developing results is showing the good balance between the developing cost and warranty cost at market.

• The korean journal of orthodontics
• /
• v.22 no.4 s.39
• /
• pp.855-868
• /
• 1992

This study was designed to test the possibility of using a standardized lateral facial photographs as a clinical tool which produce the prediction of postsurgical soft-tissue profile changes associated with surgical correction in skeletal CIII patients. The number of the patients involved in this study were 27 in total, including 11 male patients and 16 female patients. A practical method to the utilization of presurgical photo prediction for mandibular prognathic patients has been presented. To predict postoperative facial appearance, montage photographs were superimposed on standard facial reference photos taken preoperatively. Within the limitations of its technology, postoperative predictions generated by this method were of sufficient accuracy, especially mandible and chin area, for clinical use. In addition, they provide valuable communication and diagnostic information which may be used in formulating treatment plan in cases requiring corrective orthognathic surgery. But, the lip changes were somewhat exaggerated by photo prediction. Consequently, the photo prediction seems suitable for planning profile changes in orthognathic surgery that include mobilization of one main mandibular fragment. Futher investigations are needed to determine whether changes of soft-tissues and hard-tissues are sufficiently reproducible so that more meaningful predictive values can be established.

• Culinary science and hospitality research
• /
• v.8 no.3
• /
• pp.39-56
• /
• 2002

This is the study to stir up importance in bakery and to present evaluation of menu goods in barkery of tourist hotels. In order to achieve the purpose of this paper, it is gone ahead of the literature review including the previous research on the manu goods evaluation of tourist hotels. The major field research is to build a frame of the paper and present the model to release my humble theory. The limitation of the study was to make much of literature basis due to insufficient previous research on the issue. This is an unprecedented study on bakery department in tourist hotels in Korea thus no research model was unavailable for cross reference or comparative research. The evaluation of bakery menu good is directly related to the satisfaction of tourist hotels bakery consumers and we need a substantial managerial development method of bakery menu goods. This study has two goals in line with the purpose of investigation, that is to say, by understanding vital statistics of consumer and influence factor were created, and finally the factors and consumers and professional worker identified. The study would be framed into 5 parts like introduction, literature review, inquiry a plan and analysis method, consequence and discussion & conclusion. After the exploitative research, the study was approached to make findings through the questionnaires designed to find the relationship factor between consumer's evaluation and professional worker's evaluation of bakery menu goods in tourist hotels.

• Progress in Medical Physics
• /
• v.1 no.1
• /
• pp.23-29
• /
• 1990

In order to explane the stereotactic procedure, the three steps of the procedure (target localization, dose planning, and radiation treatment) must be examined separately. The ultimate accuracy of the full procedure is dependent on each of these steps and on the consistancy of the approach The concern in this article was about dose planning, which is a important factor to the success of radiation treatment. The major factor in dose planning is a dosimetry system to evaluate the dose delivered to the target and normal tissues in the patient, while it generates an optimal dose distribution that will satisfy a set of clinical criteria for the patient. A three-dimensional treatment planning program is a prerequisite for treatment plan optimization. It must cover 3-D methods for representing the patient, the dose distributions, and beam settings. The major problems and possible modelings about 3-D factors and optimization technique were discussed to simplify and solve the problems associatied with 3-D optimization, with relative ease and efficiency. These modification can simplify the optimization problem while saving time, and can be used to develop reference dose planning system to prepare standard guideline for the selection of optimum beam parameters, such as the target position, collimator size, arc spacing, the variation in arc length and weight. The method yields good results which can then be simulated and tailored to the individual case. The procedure needed for dose planning in stereotactic radiosurgery is shown in figure 1.