• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.51-56
• /
• 2009

Time synchronization algorithm in wireless sensor networks is essential to various applications such as object tracking, data encryption, duplicate detection, and precise TDMA scheduling. This paper describes CDRS that is a time synchronization algorithm using the Clock Drift rate and Reference Signals between two sensor nodes. CDRS is composed of two steps. At first step, the time correction is calculated using offset and the clock drift rate between the two nodes based on the LTS method. Two nodes become a synchronized state and the time variance can be compensated by the clock drift rate. At second step, the synchronization node transmits reference signals periodically. This reference signals are used to calculate the time difference between nodes. When this value exceeds the maximum error tolerance, the first step is performed again for resynchronization. The simulation results on the performance analysis show that the time accuracy of the proposed algorithm is improved, and the energy consumption is reduced 2.5 times compared to the time synchronization algorithm with only LTS, because CDRS reduces the number of message about 50% compared to LTS and reference signals do not use the data space for timestamp.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.879-888
• /
• 2004

In this paper, we propose a real time QoS(Quality of Service) guaranteed transmission mechanism for MPEG video traffic at the congested node in IP based networks. Recent spread of the Internet has increased the demands of a real time multimedia service of the quality, Because the type of Internet services can, however, offer the best effort delivery strategies, it is difficult to treat all the types of traffic with differential COS (Class of Service). Most of all, the hierarchical coding method of MPEG data utilizes the reference frame for the motion prediction. The loss of the reference frames makes QoS of the video traffic degraded because the reference frame bit error causes the consecutive packet loss. Therefore we have studied the real time QoS guaranteed mechanism for video traffic by analyzing the previous methods. Computer simulation results show that the proposed scheme has better performance than the previous one.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.78-81
• /
• 2010

In this paper, we propose an efficient and effective selective protection scheme to SVC that exploit the propagation of protection effect by protecting significant frames that can give the maximum visual quality degradation. We model SVC dependency coding structure as a directed acyclic graph which is characterized with an estimated visual quality value as the attribute at each node. The estimated visual quality is calculated by using our model based on the proportions of intra- and inter-predicted MBs, amounts of residual, and estimated visual quality of reference frames. The proposed selective protection scheme traverses the graph to find optimal protection paths that can give maximum visual quality degradation. Experimental results show that the proposed selective protection scheme reduces the required number of frames to be protected by 46.02% compared to the whole protection scheme and 27.56% compared to the layered protection scheme.

• Journal of Sensor Science and Technology
• /
• v.16 no.1
• /
• pp.52-61
• /
• 2007

Networked embedded systems using the smart device and fieldbus technologies are now found in many industrial fields including process automation and automobiles. However the discrepancy between a node's view of current time and the rest of the system can cause many difficulties in the design and implementation of a networked system. To provide a networked system with a global reference time, the problem of clock synchronization has been intensively studied over the decades. However, many of the existing solutions, which are mainly developed for large scale distributed computer systems, cannot be directly applied to embedded systems. This paper presents a fault-tolerant clock synchronization technique that can be used for a low-cost embedded system using a CAN bus. The effectiveness of the proposed method is demonstrated with a set of microcontrollers and DC motor-based actuators.

• Journal of Chest Surgery
• /
• v.35 no.12
• /
• pp.909-913
• /
• 2002

The large cell neuroendocrine carcinoma is uncommon and its diagnostic criteria was recently established as pulmonary neuroendocrine carcinoma. A 74-year-old man who was a heavy smoker without symptoms was presented with a lung mass in right lower lobe. He was diagnosed as having large cell neuroendocrine carcinoma by needle biopsy. He was treated with right lower lobe lobectomy and mediastinal lymph node dissection. We experienced one case of large cell neuroendocrine carcinoma of lung and report it with reference.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.3
• /
• pp.132-137
• /
• 2009

In this paper, a position recognition system is designed, implemented, and tested using IEEE 802.15.4a PHY (CSS) hardware and Tiny OS environment. The system is designed with extensibility and flexibility. The system consists of five kinds of nodes which have different functions from each other. Three communication channels are used for collision avoidance. In each cell, an arbiter node is used to minimize message collisions. The proposed arbitration protocol is designed to support mobility of arbitrary target nodes. Target nodes calculates their locations with communications to four location reference nodes which are placed on the comers of each cell.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1557_1558
• /
• 2009

다양한 환경에서 무선 센서노드 시스템이 적용됨에 따라 해당 시스템의 통신 방식이 중요해 지고 있다. 이에 본 논문은 통신 방식 중 진폭 변조 방식을 사용한 통신방식에서의 복조회로를 제안하였다. 보다 효율적인 복조를 위해 동적 기준전압 방식의 복조회로를 구현함으로써 저전압 입력 시에도 복조가 가능하게 하여 센서노드의 인식거리를 확대했다. 또한 제안된 회로를 시스템에 직접 적용하여 실제 진폭변조신호의 복조가 가능한지 검증함으로써 센서노드 시스템에 적용 가능함을 보였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.11
• /
• pp.69-75
• /
• 2013

This paper proposes a new algorithm for the optimal placement of a step voltage regulator(SVR) in distribution system with Distributed Generators(DG) using a Particle Swarm Optimization(PSO). The objective function of this algorithm is to find optimal placement for minimum loss while maintaining each node voltage fluctuations within upper and lower limits. In the objective function of proposed algorithm, the deviations to reference voltage and the distribution loss are considered. To verify effectiveness of the proposed method, simulation is implemented using MATLAB.

• Journal of Chest Surgery
• /
• v.25 no.11
• /
• pp.1245-1249
• /
• 1992

Tuberculosis developed in the pericardium usually occurs as diffuse constrictive pericarditis or effusive pericarditis which contains much pericardial effusion. But types such as localized abscess or tuberculoma are very rare. Myocardial tuberculosis is also very rare and mainly extended directly from hilar lymph node or spreaded hematogenously in miliary tuberculosis. It is known to be able to make arrhythmia or heart failure by invasion of conduction system or myocardial muscle mass, but it is usually discovered by incidental postmortem autopsy and rarely concerned by clinical basis. Recently we have experienced a case of localized intrapericardial tuberculous abscess which extended to myocardium and operated that successfully. So we would report them with reference study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.3-6
• /
• 2002

This paper presents the cutting simulation system for prediction and regulation of cutting force in CNC machining. The cutting simulation system includes geometric model, cutting force model, and off-line fred rate scheduling model. ME Z-map(Moving Edge node Z-map) is constructed for cutting configuration calculation. The cutting force models using cutting-condition-independent coefficients are developed for flat-end milling and ball-end milling. The off-line feed rate scheduling model is derived from the developed cutting force model. The scheduled feed rates are automatically added to a given set of NC code, which regulates the maximum resultant cutting force to the reference force preset by an operator. The cutting simulation system can be used as an effective tool for improvement of productivity in CNC machining.