• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.23-23
• /
• 2003

PCB 회로기판용 전해동박은 드럼형태의 음극 표면에 연속적으로 전기 도금한 후 벗겨내어 권취하는 원박 제조공정과 접착성, 내열성, 내화학성, 방청성을 부여하기 위한 후처리 공정으로 나눈다. 이 후처리 공정 중 동박과 수지와의 접착성을 부여하기 위해 일반적으로 전기도금을 통해 조화(Nodule)처리를 실시하는데, 최근 LCD, PDP 등의 평판 디스플레이 장치의 구동칩이 실장되는 TCP용 동박의 경우 2$\mu\textrm{m}$이하의 낮은 조도(Rz)와 함께 높은 접착강도(Peel Strength)가 요구되고 있다. 그러나, Reel to Reel 형태의 연속도금공정으로 진행되는 조화처리에 있어 일반 비이커 실험결과는 실제 양산공정과의 재현성에 있어서 상당한 제한성이 노출된 바 있다. 이에 본 연구에서는 Reel to Reel 형태의 연속도금공정을 모사 할 수 있는 실험장치를 설계, 제작하여 동박표면의 노듈형성에 있어 주요인자를 정량적으로 분석하였다.

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.344-349
• /
• 2018

본 논문은 의료용 시술에 사용되는 가이드 와이어의 테프론 코팅 장치의 주요 설계변수 설정방법에 대해 제안하였다. 제안된 장치는 가이드 와이어가 코팅 및 열처리 등을 연속적으로 수행하는 릴투릴(Reel to reel)방식으로 진행되도록 제작되었다. 이때 이송되는 가이드 와이어는 롤러 사이에서 진동을 하게 되고 이는 코팅 품질에 영향을 주게 된다. 따라서 본 논문에서는 길이방향으로 이송되는 가이드 와이어의 동역학 식을 제안하고 이를 바탕으로 이송 시 가이드 와이어의 진동 진폭이 최소화 될 수 있는 이송 속도 및 와이어를 지지하는 롤러의 간격을 설계하였다. 제안된 방법에 의해 제작된 코팅 장치를 바탕으로 의료용 가이드 와이어의 테프론 코팅을 진행하였다. 본 연구에서는 가이드 와이어의 코팅 두께 목표를 원주방향으로 $10{\mu}m$ 이내로 제작될 수 있도록 설정하였고 광학현미경을 사용하여 그 결과를 검토하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권4호
• /
• pp.12-14
• /
• 2006

YBCO coated conductors have been fabricated by the reel-to-reel processing using TFA-MOD method. In this work, the fluorine-free Y & Cu precursor solution was synthesized to shorten the calcining time by reducing the evolution of HF gas, thus the meter-long YBCO precursor films can be made within few hours by the continuous slot-die coating & calcination step using the F-free Y & Cu precursor solution. The annealing step was followed to make the YBCO films by the reel-to-reel method with the vertical gas flow system onto the moving tape. To increase the growth rate of the YBCO films by enhancing the removal of HF gas, the low total pressure was adopted in the annealing processing. And the water partial pressure and the oxygen partial pressure were varied to optimize the growth conditions of the MOD-YBCO films on the buffered metal tape. FE-SEM and XRD were used to investigate the surface morphologies and the texture of the meter-long YBCO films. The end-to-end critical current $(I_c)$ of 63A/cm-width and the critical current density $(J_c)$of $0.9MA/cm^2$ with the thickness of $0.7{\mu}m$ were obtained in the 0.42m long coated conductor.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권3호
• /
• pp.1-4
• /
• 2008

For the effective evaluation of superconducting properties of a coated conductor, with a long length, a non destructive characterization technique including a reel-to-reel (R2R) Hall measuring system have been developed. A non-contact R2R Hall sensor array system was particularly designed to measure the superconducting property of coated conductors. The superconducting properties of long length coated conductors were measured by using this device. It was demonstrated that this system was convenient to measure the intensity and distribution of the magnet field applied perpendicular to the surfaces of the coated conductors. Using this device, the defect and low critical current density(Jc) area of coated conductors could be detected in real-time measurement.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.95-95
• /
• 2006

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.96-96
• /
• 2006

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.14-14
• /
• 2004

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2006년도 추계학술발표회 초록집
• /
• pp.36-36
• /
• 2006

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권2호
• /
• pp.14-18
• /
• 2023

Superconducting layers deposited on the metal substrate using the pulsed laser deposition process (PLD) play a crucial role in exploring new applications of superconducting wires and enhancing the performance of superconducting devices. In order to improve the superconducting property and increase the throughput of superconducting wire fabricated by pulsed laser deposition, high temperature heating device is needed that provides high temperature stability and strong durability in high oxygen partial pressure environments while minimizing performance degradation caused by surface contamination. In this study, new heating device have been developed for PLD process that deposit and growth the superconducting material continuously on substrate using reel-to-reel transportation apparatus. New heating device is designed and fabricated using iron-chromium-aluminum wire and alumina tube as a heating element and sheath materials, respectively. Heating temperature of the heater was reached over 850 ℃ under 700 mTorr of oxygen partial pressure and is kept for 5 hours. The experimental results confirm the effectiveness of the developed heating device system in maintaining a stable and consistent temperature in PLD. These research findings make significant contributions to the exploration of new applications for superconducting materials and the enhancement of superconducting device performance.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.150-152
• /
• 2003

YBa$_2$Cu$_3$O$_{7-{\delta}}$(YBCO) coated conductors were deposited by pulsed laser deposition (PLD) on short buffered substrate in continuous PLD reel-to-reel system. The oxide multilayer buffered substrate of architectures of CeO$_2$/YSZ/Y$_2$O$_3$was fabricated by PLD at steady status. The degree of texture of each layer was investigated using X-ray diffraction including $\theta$-2$\theta$ scans, $\omega$-scans and $\Phi$-scans analysis. Their surface morphology was observed by scanning electron microscopy (SEM) The FWHM of the X-ray $\omega$-scans and $\Phi$-scans indicated that YBCO and buffer layers closely replicate the in-plane and out-of-plane texture of metal tape. Critical current at 77K self-field of 19A, critical temperature of 86K, and current density of 2MA/$\textrm{cm}^2$ were measured. The film also exhibits a homogeneous and dense surface morphology.e morphology.