• 제목/요약/키워드: redundant architecture

검색결과 93건 처리시간 0.022초

범정부 데이터 참조모형 데이터 분류체계 재정립에 관한 연구 - 데이터 분류 원칙, 체계수립 및 사례 검증 - (The Study of Data Classification Rethesis on Korea Government DRM (Data Reference Model) - The Establishment of New Data Principal, Classfication and Case Verification -)

  • 구자면;박주석;신다울
    • 정보화연구
    • /
    • 제9권2호
    • /
    • pp.187-197
    • /
    • 2012
  • 정보화 투자의 증가는 정보기술자원의 복잡성을 증대시켰으며, 이로 인해 중복투자 및 정보시스템 관리의 비효율성이 대두 되었다. 이에 정보기술 자원에 대한 효율적 도입과 관리를 위하여 EA(Enterprise Architecture) 사상이 발전하였다. 하지만, 데이터 영역에 대해서는 EA 사상이 발전한 이후에도 한동안 체계적인 지침의 제공이 미흡하였다. 따라서, 이제는 프로세스에 숨어있는 데이터를 도출, 관리하여 공공부문 각 기관 간 데이터의 공유성 및 재활용성을 높이기 위한 데이터 참조모형(DRM : Data Reference Model)의 활용이 필요하다. 이에 본 연구에서는 데이터 참조모형 중 가장 활용도가 높은 데이터 분류체계에 대한 개선의 필요성을 인식하고, 분류체계 재정립을 위한 방향성 및 연구 방법을 제시해 보려 한다.

해상 상태 및 선저여유수심을 고려한 연안 내 선박의 최적 항로 결정 (Determination of Optimal Ship Route in Coastal Sea Considering Sea State and Under Keel Clearance)

  • 이원희;유원철;최광혁;함승호;김태완
    • 대한조선학회논문집
    • /
    • 제56권6호
    • /
    • pp.480-487
    • /
    • 2019
  • Ship route planning is to find a route to minimize voyage time and/or fuel consumption in a given sea state. Unlike previous studies, this study proposes an optimization method for the route planning to avoid the grounding risk near the coast. The route waypoints were searched using A* algorithm, and the route simplification was performed to remove redundant waypoints using Douglas-Peucker algorithm. The optimization was performed to minimize fuel consumption by setting the optimization design parameters to the engine rpm. The sea state factors such as wind, wave, and current are also considered for route planning. We propose the constraint to avoid ground risk by using under keel clearance obtained from electoronic navigational chart. The proposed method was applied to find the optimal route between Mokpo and Jeju. The result showed that the proposed method suggests the optimal route that minimizes fuel consumption.

선박의 의장시스템에 대한 안전성 및 Redundancy 평가 방법론 연구 (The Study on Risk and Redundancy Assessment Methodology of Ship Machinery System)

  • 문경태;양영순;윤여표;유원선
    • 대한조선학회논문집
    • /
    • 제47권1호
    • /
    • pp.76-87
    • /
    • 2010
  • According to the new rules and regulations (New SOLAS), major safety critical systems are to be designed to be redundant, which is called 'Redundancy Design'. This paper was to quantitatively analyze the degree of influence of the redundancy design applied to major safety critical systems using IMO's FSA(formal Safety Assessment) method. For the purpose of this study, the diesel engine system, which is actually one of major safety critical systems, was dealt with FMEA, FTA and ETA technique. In addition, whether the redundancy was met or not was verified and the degree of safety, or redundancy, was represented in terms of reliability. In conclusion, the safety of propulsion systems is possibly assessed systematically by estimating the risk level in terms of frequency and fatality.

노인을 위한 지능형 주택기술개발 특성 분석 (Analysis on characteristics of intelligent home technologies development for the elderly)

  • 이소영
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제13권4호
    • /
    • pp.15-23
    • /
    • 2007
  • Increase of aging population and demands for care and support systems, needs and demands for a variety of care services and housing facilities have increased. With the emergence of gerontechnology, tangible and intangible technologies and innovations have been explored and developed in many countries. Since housing environment is very important to define well-being and quality of life of the elderly, technology applications in the living environment are considered as important means. The purpose of this study is to enumerate and investigate technologies for the elderly to assist daily living and help care providers, and to explore technology applications in the built environments. This study also investigate how intelligent technologies are installed in the built environment and physical consideration for a variety of approaches. The content analysis was conducted to investigate technology developments for the elderly based on web materials and publication materials. The seven examples were chosen since they are seeking technologies especially for the elderly or aging-in place. General goals for the diffusion of intelligent homes expecially for the elderly are to be easy to install and remove, unobtrusive, redundant cueing, easy to use, and robust. The results of this study suggest application considerations for the technologies of the built environment for the elderly.

  • PDF

생존 가능한 선박 백본 네트워크 설계에 관한 연구 (A Study on the Design of a Survivable Ship Backbone Network)

  • 탁성우;김혜진;김희겸;김태훈;박준희;이광일
    • 한국정보통신학회논문지
    • /
    • 제16권7호
    • /
    • pp.1416-1427
    • /
    • 2012
  • 본 논문에서는 생존 가능한 선박 백본 네트워크의 설계 기법을 제안하였다. 제안한 설계 기법에서 선박 백본 네트워크의 토폴로지를 근사 최적으로 구성하기 위하여 먼저 선박 장치의 통신 인터페이스와 링크가 이중화로 구성된 선박 백본 네트워크의 효율적인 구조를 분석 및 제안하였다. 그리고 제안한 선박 백본 네트워크의 구조를 고려한 정수선형계획법 기반 물리 토폴로지의 구성 방안을 제안하였다. 마지막으로 메타 휴리스틱 기법을 적용하여 물리 토폴로지 계층 위에서 형성되는 논리 토폴로지의 구성 방안을 제안하였다.

지능형 I/O구조를 갖는 RAID 시스템의 성능 향상을 위한 연구 (A Study for High Performance of Intelligent I/O Architecture of RAID System)

  • 최귀열;박계원
    • 한국정보통신학회논문지
    • /
    • 제10권11호
    • /
    • pp.1989-1995
    • /
    • 2006
  • RAID는 디스크 배열 상에 데이터를 이중으로 저장하거나 패리티를 사용하는 기법으로 디스크에 장애가 일어났을 경우 이를 복구하는 구조로 되어 있다. 본 논문에서는 지능형 I/O 구조를 갖는 고성능 I/O 서브시스템에서 CPU로부터 대부분 I/O 작업 부하를 줄이고 동시 에 I/O 성능을 향상시키는 방안에 대하여 연구한다. 지능형 I/O 장치의 디스크 스케줄링 디자인에 관한 초당 MB 처리율, 최대 I/O 응답시간 등의 실험 통하여 새로운 스케줄링 기법 에 의해 성능을 개선한다.

제약적인 환경에 적합한 유한체 연산기 구조 설계 (Design of an Operator Architecture for Finite Fields in Constrained Environments)

  • 정석원
    • 정보보호학회논문지
    • /
    • 제18권3호
    • /
    • pp.45-50
    • /
    • 2008
  • 유한체 연산기는 생성 기약다항식과 원소의 표현 방법에 따라 효율성에 많은 영향을 받는다. 본 논문에서는 홀수 소수 p에 대한 확장체 GF$(p^n)$ 위의 곱셈에 대한 두 가지 직렬곱셈기를 제안한다. 기약 이항 다항식을 이용한 직렬 곱셈기는 (2n+5)개의 레지스터, 2개의 MUX, 2개의 GF(p)곱셈기, 1개의 GF(p) 덧셈기를 사용하여 $n^2+n$ 클럭 싸이클 이후에 곱셈 결과를 얻는 구조이다. 기약 AOP를 이용한 직렬 곱셈기는 (2n+5)개의 레지스터, 1개의 MUX, 1개의 GF(p)곱셈기, 1개의 GF(p) 덧셈기를 사용하여 $n^2$+3n+2 클럭 싸이클 이후에 곱셈결과를 얻는다.

Content Distribution for 5G Systems Based on Distributed Cloud Service Network Architecture

  • Jiang, Lirong;Feng, Gang;Qin, Shuang
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권11호
    • /
    • pp.4268-4290
    • /
    • 2015
  • Future mobile communications face enormous challenges as traditional voice services are replaced with increasing mobile multimedia and data services. To address the vast data traffic volume and the requirement of user Quality of Experience (QoE) in the next generation mobile networks, it is imperative to develop efficient content distribution technique, aiming at significantly reducing redundant data transmissions and improving content delivery performance. On the other hand, in recent years cloud computing as a promising new content-centric paradigm is exploited to fulfil the multimedia requirements by provisioning data and computing resources on demand. In this paper, we propose a cooperative caching framework which implements State based Content Distribution (SCD) algorithm for future mobile networks. In our proposed framework, cloud service providers deploy a plurality of cloudlets in the network forming a Distributed Cloud Service Network (DCSN), and pre-allocate content services in local cloudlets to avoid redundant content transmissions. We use content popularity and content state which is determined by content requests, editorial updates and new arrivals to formulate a content distribution optimization model. Data contents are deployed in local cloudlets according to the optimal solution to achieve the lowest average content delivery latency. We use simulation experiments to validate the effectiveness of our proposed framework. Numerical results show that the proposed framework can significantly improve content cache hit rate, reduce content delivery latency and outbound traffic volume in comparison with known existing caching strategies.

Radix-4 Booth Recoding과 RB 연산을 이용한 새로운 복소수 승산 알고리듬 및 10-bit CMAC코어 설계 (A New Complex-Number Multiplication Algorithm using Radix-4 Booth Recoding and RB Arithmetic, and a 10-bit CMAC Core Design)

  • 김호하;신경욱
    • 전자공학회논문지C
    • /
    • 제35C권9호
    • /
    • pp.11-20
    • /
    • 1998
  • 고속 복소수 연산장치는 채널등화, 동기신호 복원, 변조 및 복조 등 디지탈 통신 시스템의 기저대역 신호처리에 필수적인 기능블록이다. 본 논문에서는 redundant binary (RB) 연산과 radix-4 Booth recoding을 결합한 새로운 복소수 승산 알고리듬을 제안한다. 제안되는 복소수 승산 방법은 실수 승산기를 사용하는 기존의 방법과 비교하여 부분곱의 수를 반으로 감소시키며, 단순화된 병렬구조로 구현되므로 고속 동작 및 저전력 소모를 가능하게 한다. 제안된 알고리듬을 적용하여 10-bit operand를 갖는 prototype 복소수 승산-누적기(complex-number multiplier-accumulator ; CMAC) 코어를 0.8-㎛ N-Well CMOS 공정으로 설계, 제작하였다. 제작된 CMAC 칩은 18,000여개의 트랜지스터로 구성되며, 코어부분의 면적은 약 1.60 × 1.93 ㎟이다. 제작된 칩을 테스트 보드에 실장하여 특성을 평가한 결과, 전원전압 V/sub DD/=3.3-V에서 120-MHz의 속도로 동작함을 확인하였으며, 이때의 전력소모는 약 63-mW로 측정되었다.

  • PDF

A B-Spline Higher Order Panel Method Applied to the Radiation Wave Problem for a 2-D Body Oscillating on the Free Surface

  • Hong, D.C.;Lee, C.-S.
    • Journal of Ship and Ocean Technology
    • /
    • 제3권4호
    • /
    • pp.1-14
    • /
    • 1999
  • The improved Green integral equation using the Kelvin-type Green function in known free of irregular frequencies where the integral over the inner free surface integral is removed from the integral equation, resulting in an overdetermined integral equation. The solution of the overdetermined Green integral equation is shown identical with the solution of the improved Green integral equation Using the B-spline higher order panel method, the overdetermined equation is discretized in two different ways; one of the resulting linear system is square and the other is redundant. Numerical experiments show that the solutions of both are identical. Using the present methods, the exact values and higher derivatives of the potential at any place over the wetted surface of the body can be found with much fewer panels than low order panel method.

  • PDF