• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1003-1005
• /
• 1997

To evaluate the quality of a system or its ability to perform a required function, it is necessary to quantify the reliability of that system. The reliability techniques are based on the concept of expected failure rate and average-outage-duration method. For each load point, the expected failure rate, average outage duration and average annual outage time are evaluated. This paper deals with the reliability evaluation for distribution system including the protection relay system. In evaluating the reliability, it suggests a method for the analysis of protective system reliability, that provides a probabilistic measure of the success of the protective apparatus to perform its intended function. The analysis shows the dependency of success on the reliability of many components, and the way this reliability may be enhanced by redundancy.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.557-564
• /
• 2002

One of the primary factors like plate structure In ship is redundancy structure that is comparable with ocean structure and frame structure. The more component material becomes buckling collapsed locally the less structure stiffness becomes accordingly. As a result, by increasing the load distribution of any other subsidiary structure continually component member collapses, therefore the structure could be in danger of collapse. So, in order to interpret this phenomenon precisely, the study on boundary condition of the ship's Plate and post-buckling analysis must be considered. In this study, the rectangular plate is compressed by the in-plane load. Buckling ＆ Ultimate strength characteristics we applied to be the elasto-plasticity large deformation by F.E.M. On this basis, elasto-plasticity of the plain plate are investigated. This study proved elasto-plasticity behaviour of tile ship's plate In accordance with boundary condition based on the series analysis In case of the compressive load operation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2557-2560
• /
• 2000

The protection system of the nuclear reactor and chemical reactor are representative of PPC(Plant Protection Controller). This PPC must be designed based on reliability as well as concept of safety, which is a failed system go a way of safe. PPC is consist of part of data acquisition, calculator, communication with redundancy, and a voter is important factor of reliability. Because it is serial connected. This paper presents a Design and Analysis of a Voting Mechanism considering Safety for NMR PPC Using EPLD. In the case of digital implementation a coincidence logic(voter) of PPC, it needs CPU and memory, so increase a number of units. Therefore the failure rate and cost is increased. On the contrary when it is designed EPLD or FPGA.

• Structural Engineering and Mechanics
• /
• 제45권2호
• /
• pp.201-209
• /
• 2013

A new dynamic reliability analysis of structure under repeated random loads is proposed in this paper. The proposed method is developed based on the idea that the probability density of several times random loads can be derived from the probability density of single-time random load. The reliability prediction models of structure based on time responses under several times random loads with and without strength degradation are obtained by using the stress-strength interference theory and probability density evolution method. The resulting differential equations in the prediction models can be solved by using the forward finite difference method. Then, the probability density functions of strength redundancy of the structures can be obtained. Finally, the structural dynamic reliability can be calculated using integral method. The efficiency of the proposed method is demonstrated numerically through a speed reducer. The results have shown that the proposed method is practicable, feasible and gives reasonably accurate prediction.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 5월 학술대회지
• /
• pp.123-126
• /
• 2003

We discuss how to reduce the number of inverse matrix and its dimensions requested in MLLR framework for speaker adaptation. To find a smaller set of variables with less redundancy, we employ PCA(principal component analysis) and ICA(independent component analysis) that would give as good a representation as possible. The amount of additional computation when PCA or ICA is applied is as small as it can be disregarded. The dimension of HMM parameters is reduced to about 1/3 ~ 2/7 dimensions of SI(speaker independent) model parameter with which speech recognition system represents word recognition rate as much as ordinary MLLR framework. If dimension of SI model parameter is n, the amount of computation of inverse matrix in MLLR is proportioned to O($n^4$). So, compared with ordinary MLLR, the amount of total computation requested in speaker adaptation is reduced to about 1/80~1/150.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.40.2-40
• /
• 2001

The protection system of the system communication, nuclear reactor and chemical reactor are representative of reliable system. This reliable system must be designed based on reliability as well as concept of safety, which is a failed system go a way of safe. Reliable system is composed of part of data acquisition, calculator, communication with redundancy, and a voter is important factor of reliability. Because it is serially connected. This paper presents a Design and Analysis of a Voting Mechanism considering Safety for reliable system Using EPLD. In the case of digital implementation a coincidence logic (voter) of reliable system, it needs CPU and memory, so increase a number of units. Therefore the failure rate and cost are increased on contrary when it is designed EPLD or FPGA.

• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1193-1208
• /
• 2014

A simulation of failures on responsible elements is only one form of the extreme structural behavior analysis. By understanding the dynamic behavior in incidental situations, it is possible to make a special structural design from the point of the largest axial force, stress and redundancy. The numerical realization of one such simulation analysis was performed using FEM in this paper. The boundary parameters of transient analysis, such as overall structural damping coefficient, load accelerations, time of load fall and internal forces in the responsible structural elements, were determined on the basis of the dynamic experimental parameters. The structure eigenfrequencies were determined in modal analysis. In the study, the basic incidental models were set. The models were identified by many years of monitoring incidental situations and the most frequent human errors in work with heavy structures. The combined load models of structure are defined in the paper since the incidents simply arise as consequences of cumulative errors and failures. A feature of a combined model is that the single incident causes the next incident (consecutive timing) as well as that other simple dynamic actions are simultaneous. The structure was observed in three typical load positions taken from the crane passport (range-load). The obtained dynamic responses indicate the degree of structural sensitivity depending on the character of incident. The dynamic coefficient KD was adopted as a parameter for the evaluation of structural sensitivity.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.383-389
• /
• 2013

Analysis and review of survivability is one of the most important aspects when naval vessels are designed. Because aiming points of threat towards the naval vessels in the battle field could not be estimated exactly, probabilistic and statistic approach is frequently introduced to evaluate and enhance the vessel survivability. Some commercial survivability analysis programs are used to perform the analysis for enhancement of susceptibility, vulnerability and recoverability but, they are usually classified and impossible to be exported to other countries because of their national security. In this paper, a simplified vulnerability analysis program is developed to evaluate the vulnerability of the warship in aspects of structure, redundancy and its mission capability at the conceptual design stage. To verify the developed program, the analysis results were compared with those of the commercial program MOTISS(Measure of Total Integrated System Survivability).

• 응용통계연구
• /
• 제28권1호
• /
• pp.49-60
• /
• 2015

군생태학에서 종, 장소 그리고 환경변수의 관계를 시각적으로 보기 위해 대응분석, 정준대응분석 등 다양한 서열화방법들을 사용한다. Ter Braak (1986), Jackson 등 (1991), Parmer (1993) 등은 고유값 및 거리그래프를 이용하여 서열화방법들을 비교하고 있는데, 이 방법들은 조사된 데이터에 근거하고 있기 때문에, 모집단과 행렬도의 관계를 보여주지는 못한다. 따라서, 본 논문에서는 행렬도에 모집단 정보의 표현정도를 측정하는 방법을 소개하고, 이를 활용하여 서열화방법들을 객관적으로 비교하였다. 비교결과, 정준대응분석은 대응분석과 유사한 정분류율을 유지하면서도 환경정보를 이차원 공간에 표현할 수 있는 장점을 지닌 분석임을 확인하였다.

• 한국정보과학회논문지:정보통신
• /
• 제34권5호
• /
• pp.305-315
• /
• 2007

광대역통합망(Broadband Convergence Network, BcN)은 전화, 인터넷, 방송 네트워크 등 개별적으로 운용되어오던 네트워크들을 하나의 통합망으로 구축, 구동, 관리하는 차세대 네트워크이다. 개별적으로 운용되어오던 네트워크들이 하나로 통합되면서 서비스 별로 산재해 있던 네트워크의 위협요소는 하나의 통합망에서 더욱더 위력적인 요소로 다가올 것이다. 본 논문에서는 BcN 서비스들이 악성 공격에 대해 지속적인 서비스 운영을 보장하기 위한 네트워크 디자인 방법을 제안한다. 본 연구는 서비스 시간과 공간 중요도를 바탕으로 BcN 필수 서비스 구성요소를 도출하고, 구성요소의 형태에 따라 서버 형태, 게이트웨이 형태, 복합 형태의 세 가지 타입으로 구분한다. BcN 환경에서 발생 가능한 공격 시나리오들을 통해 BcN 필수 서비스의 침입감내 기술 적용 방안을 모색한다. 이를 통하여 하드웨어 중복성과 Policy 서버의 보안 정책 설정을 통한 BcN 침입감내 네트워크 디자인을 제안한다. 본 논문에서는 제안한 프로토타입 네트워크를 BcN에 적용하기 전과 적용한 후 BcN에서 공격이 발생되었을 때의 시나리오를 통하여 BcN의 침입감내를 가능케 함을 보인다.