• Korean Journal of Radiology
• /
• v.22 no.5
• /
• pp.725-734
• /
• 2021

Objective: To intraindividually compare hepatocellular carcinoma (HCC) washout between MRIs using hepatobiliary agent (HBA) and extracellular agent (ECA). Materials and Methods: This study included 114 prospectively enrolled patients with chronic liver disease (mean age, 55 ± 9 years; 94 men) who underwent both HBA-MRI and ECA-MRI before surgical resection for HCC between November 2016 and May 2019. For 114 HCCs, the lesion-to-liver visual signal intensity ratio (SIR) using a 5-point scale (-2 to +2) was evaluated in each phase. Washout was defined as negative visual SIR with temporal reduction of visual SIR from the arterial phase. Illusional washout (IW) was defined as a visual SIR of 0 with an enhancing capsule. The frequency of washout and MRI sensitivity for HCC using LR-5 or its modifications were compared between HBA-MRI and ECA-MRI. Subgroup analysis was performed according to lesion size (< 20 mm or ≥ 20 mm). Results: The frequency of portal venous phase (PP) washout with HBA-MRI was comparable to that of delayed phase (DP) washout with ECA-MRI (77.2% [88/114] vs. 68.4% [78/114]; p = 0.134). The frequencies were also comparable when IW was allowed (79.8% [91/114] for HBA-MRI vs. 81.6% [93/114] for ECA-MRI; p = 0.845). The sensitivities for HCC of LR-5 (using PP or DP washout) were comparable between HBA-MRI and ECA-MRI (78.1% [89/114] vs. 73.7% [84/114]; p = 0.458). In HCCs < 20 mm, the sensitivity of LR-5 was higher on HBA-MRI than on ECA-MRI (70.8% [34/48] vs. 50.0% [24/48]; p = 0.034). The sensitivity was similar to each other if IW was added to LR-5 (72.9% [35/48] for HBA-MRI vs. 70.8% [34/48] for ECA-MRI; p > 0.999). Conclusion: Extracellular phase washout for HCC diagnosis was comparable between MRIs with both contrast agents, except for tumors < 20 mm. Adding IW could improve the sensitivity for HCC on ECA-MRI in tumors < 20 mm.

• Korean Journal of Radiology
• /
• v.24 no.7
• /
• pp.647-659
• /
• 2023

Objective: The study was conducted to investigate the effect of correct occlusion of the left atrial appendage (LAA) on intracardiac blood flow and thrombus formation in patients with atrial fibrillation (AF) using four-dimensional (4D) flow magnetic resonance imaging (MRI) and three-dimensional (3D)-printed phantoms. Materials and Methods: Three life-sized 3D-printed left atrium (LA) phantoms, including a pre-occlusion (i.e., before the occlusion procedure) model and correctly and incorrectly occluded post-procedural models, were constructed based on cardiac computed tomography images from an 86-year-old male with long-standing persistent AF. A custom-made closed-loop flow circuit was set up, and pulsatile simulated pulmonary venous flow was delivered by a pump. 4D flow MRI was performed using a 3T scanner, and the images were analyzed using MATLAB-based software (R2020b; Mathworks). Flow metrics associated with blood stasis and thrombogenicity, such as the volume of stasis defined by the velocity threshold ($\left|\vec{V}\right|$ < 3 cm/s), surface-and-time-averaged wall shear stress (WSS), and endothelial cell activation potential (ECAP), were analyzed and compared among the three LA phantom models. Results: Different spatial distributions, orientations, and magnitudes of LA flow were directly visualized within the three LA phantoms using 4D flow MRI. The time-averaged volume and its ratio to the corresponding entire volume of LA flow stasis were consistently reduced in the correctly occluded model (70.82 mL and 39.0%, respectively), followed by the incorrectly occluded (73.17 mL and 39.0%, respectively) and pre-occlusion (79.11 mL and 39.7%, respectively) models. The surfaceand-time-averaged WSS and ECAP were also lowest in the correctly occluded model (0.048 Pa and 4.004 Pa^-1, respectively), followed by the incorrectly occluded (0.059 Pa and 4.792 Pa^-1, respectively) and pre-occlusion (0.072 Pa and 5.861 Pa^-1, respectively) models. Conclusion: These findings suggest that a correctly occluded LAA leads to the greatest reduction in LA flow stasis and thrombogenicity, presenting a tentative procedural goal to maximize clinical benefits in patients with AF.

• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1303-1315
• /
• 2024

Objective: This study aimed to determine the effects of increasing energy and protein levels in diets by including protected fat (PF), glycerol (GL), and soybean meal (SBM) on growth performance, physiological parameters, carcass characteristics, and behavioral measurements of late-fattening Hanwoo steers under heat stress conditions. Methods: Thirty-six steers (initial body weight, 724.9±58.3 kg; age, 25.5±0.4 month) were assigned into control (total digestible nutrient [TDN] 76%, crude protein [CP] 15%), PF (TDN 83.6%, CP 15%), PF+GL (TDN 83.6%, CP 15%) and PF+GL+SBM (TDN 83.6%, CP 16.5%) by randomized complete block design for a total of 16 weeks with division of 4-week periods. The average temperature-humidity index was 87.0 (1st period; severe), 82.8 (2nd; moderate), 71.4 (3rd; comfort), and 68.1 (4th; comfort). Results: The dry matter intake (DMI) showed no treatments differences during the whole experiment. However, DMI in 1st and 2nd period decreased by approximately 30% and 10% compared to 4th period, respectively. Higher average daily gain and feed conversion ratio were noted for treatments compared to control at both 1st and 2nd period (p<0.05). There were no treatment effects on rectal temperature (RT), cortisol, and behaviors during the entire experiment. However, both RT and cortisol in 0, 1st and 2nd period were higher than those of 3rd and 4th period (p<0.05). Carcass yield and grade remained unaffected by increasing TDN and CP levels. Behavioral changes in the hot season (1st period) included reduced lying (43%), increased standing (48%), decreased walking (62%), and decreased eating (38%) (p<0.05), with an increase in drinking by 54%. Rumination during standing was 53% higher, while rumination during lying was about 33% lower compared to the post-hot season (3rd period) (p<0.05). Conclusion: Dietary supplementation of protected fat in late-fattening Hanwoo steers under heat stress had a positive effect on preventing a reduction in performance.

• Animal Bioscience
• /
• v.37 no.8
• /
• pp.1452-1462
• /
• 2024

Objective: This study aimed to investigate the effects of dietary supplementation with Agaricus blazei polysaccharide (ABP) at varying concentrations on the performance, egg quality, blood biochemistry, intestinal morphology, and microflora of quail. Methods: The study involved a total of 2,700 Korean quails, which were randomly divided into three groups. The measured variables encompassed productive performance, egg parameters, carcass parameters, serum metabolites, immune response parameters, antioxidative properties, and gut microbiome. Results: The addition of ABP did not have a significant effect on average daily feed intake. However, it was found to increase the average daily egg weight and egg production rate, reduce the feed-egg ratio. There were no significant impacts on egg quality measures such as egg shape index, egg yolk index and color, egg yolk and protein content. However, ABP supplementation significantly increased the Hough unit (p<0.01) and decreased the rate of unqualified eggs (p<0.01). Regarding serum parameters, the inclusion led to an increase in total protein concentration (p<0.05) and a reduction in low-density lipoprotein cholesterol (p<0.05). There were no significant effects observed on immune indicators such as immunoglobulin A (IgA) and IgM. ABP supplementation increased the levels of serum antioxidant indicators, including glutathione peroxidase, total superoxide dismutase (p<0.05), and total antioxidant capacity colorimeter (p<0.05). Furthermore, ABP supplementation significantly elevated the intramuscular fatty acid content in quail meat. Additionally, ABP supplementation demonstrated a significant improvement in the diversity of gut microbiota and induced alterations in the composition of the gut microbiota. Conclusion: The findings of this study indicate that dietary supplementation of ABP enhanced production performance and antioxidant capacity while increasing the levels of polyunsaturated fatty acids in quail muscle.

• Structural Engineering and Mechanics
• /
• v.90 no.6
• /
• pp.611-633
• /
• 2024

This study intends to investigate the response of multi-cell (MC) beams to flexural loads in which the primary reinforcement is composed of both metallic and non-metallic materials. "Multi-cell" describes beam sections with multiple longitudinal voids separated by thin webs. Seven reinforced concrete MC beams measuring 300×200×1800 mm were tested under flexural loadings until failure. Two series of beams are formed, depending on the type of main reinforcement that is being used. A control RC beam with no openings and six MC beams are found in these two series. Series one and two are reinforced with metallic and non-metallic main reinforcement, respectively, in order to maintain a constant reinforcement ratio. The first crack, ultimate load, deflection, ductility index, energy absorption, strain characteristics, crack pattern, and failure mode were among the structural parameters of the beams under investigation that were documented. The primary variables that vary are the kind of reinforcing materials that are utilized, as well as the kind and quantity of mesh layers. The outcomes of this study that looked at the experimental and numerical performance of ferrocement reinforced concrete MC beams are presented in this article. Nonlinear finite element analysis (NLFEA) was performed with ANSYS-16.0 software to demonstrate the behavior of composite MC beams with holes. A parametric study is also carried out to investigate the factors, such as opening size, that can most strongly affect the mechanical behavior of the suggested model. The experimental and numerical results obtained demonstrate that the FE simulations generated an acceptable degree of experimental value estimation. It's also important to demonstrate that, when compared to the control beam, the MC beam reinforced with geogrid mesh (MCGB) decreases its strength capacity by a maximum of 73.33%. In contrast, the minimum strength reduction value of 16.71% is observed in the MC beams reinforced with carbon reinforcing bars (MCCR). The findings of the experiments on MC beams with openings demonstrate that the presence of openings has a significant impact on the behavior of the beams, as there is a decrease in both the ultimate load and maximum deflection.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.27-34
• /
• 2024

The direct and indirect damages caused by fires in underground utility tunnels have a great impact on society as a whole, so efforts are needed to prevent and manage them in advance. To this end, research is ongoing to prevent disasters such as fire flooding by applying digital twin technology to underground utility tunnels. A network is required to transmit the sensed signals from each sensor to the platform. In essence, it is necessary to analyze the application of wireless networks in the underground utility tunnel environments because the tunnel lacks the reception range of external wireless communication systems. Within the underground utility tunnels, electromagnetic interference caused by transmission and distribution cables, and diffuse reflection of signals from internal structures, obstacles, and metallic pipes such as water pipes can cause distortion or size reduction of wireless signals. To ensure real-time connectivity for remote surveillance and monitoring tasks through sensing, it is necessary to measure and analyze the wireless coverage in underground utility tunnels. Therefore, in order to build a wireless network environment in the underground utility tunnels. this study minimized the shaded area and measured the actual cavity environment so that there is no problem in connecting to the wireless environment inside the underground utility tunnels. We analyzed the data transmission rate, signal strength, and signal-to-noise ratio for each section of the terrain of the underground utility tunnels. The obtained results provide an appropriate wireless planning approach for installing wireless networks in underground utility tunnels.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.2
• /
• pp.45-55
• /
• 2024

This study analyzed the efficiency determinants of specialty construction companies by industry using the DEA model and the Tobit model. The analysis targets are 394 specialty construction companies as of 2022. As a result of analysis of efficiency determinants using 12 company characteristics as independent variables, the biggest problem for specialty construction companies was overall efficiency reduction due to rising labor costs. In addition, in a situation where construction companies' loan regulations are severe, the debt ratio was found to have a positive effect on efficiency. Company size had a different impact by industry, and the number of businesses held, credit score, and total capital turnover had an effect only on some industries. This study presents results that are an advance on existing research in that it strategically analyzes factors for improving the efficiency of specialty construction companies. However, it has limitations such as limiting the analysis to only specialty construction companies subject to external audit, insufficient number of companies subject to analysis by industry, and analyzing relative efficiency in the same category for each industry.

• Biomolecules & Therapeutics
• /
• v.32 no.3
• /
• pp.329-340
• /
• 2024

Mangiferin is a kind of natural xanthone glycosides and is known to have various pharmacological activities. However, since the beneficial efficacy of this compound has not been reported in retinal pigment epithelial (RPE) cells, this study aimed to evaluate whether mangiferin could protect human RPE ARPE-19 cells from oxidative injury mimicked by hydrogen peroxide (H₂O₂). The results showed that mangiferin attenuated H₂O₂-induced cell viability reduction and DNA damage, while inhibiting reactive oxygen species (ROS) production and preserving diminished glutathione (GSH). Mangiferin also antagonized H₂O₂-induced inhibition of the expression and activity of antioxidant enzymes such as manganese superoxide dismutase and GSH peroxidase, which was associated with inhibition of mitochondrial ROS production. In addition, mangiferin protected ARPE-19 cells from H₂O₂-induced apoptosis by increasing the Bcl-2/Bax ratio, decreasing caspase-3 activation, and blocking poly(ADP-ribose) polymerase cleavage. Moreover, mangiferin suppressed the release of cytochrome c into the cytosol, which was achieved by interfering with mitochondrial membrane disruption. Furthermore, mangiferin increased the expression and activity of heme oxygenase-1 (HO-1) and nuclear factor-erythroid-2 related factor 2 (Nrf2). However, the inhibition of ROS production, cytoprotective and anti-apoptotic effects of mangiferin were significantly attenuated by the HO-1 inhibitor, indicating that mangiferin promoted Nrf2-mediated HO-1 activity to prevent ARPE-19 cells from oxidative injury. The results of this study suggest that mangiferin, as an Nrf2 activator, has potent ROS scavenging activity and may have the potential to protect oxidative stress-mediated ocular diseases.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.4
• /
• pp.115-122
• /
• 2008

This paper is to investigate the affecting factors on spalling of the high strength concrete including W/B, air content and moisture condition as well as PP fiber contents subjected to fire. An increase with 0.05% of PP fiber resulted in a reduction of slump flow by as much as 11%. Ten percent of air contents due to excessive amounts of AE agent does not lead to variance of slump flow, regardless of PP fiber content. For the effect of the compressive strength, high strength concrete with 15, 25 and 35% of W/B gained 60 MPa~100 MPa of the compressive strength. High strength concrete with H-air had half of compressive strength of that with L-air due to large amount of air. Fire test was conducted in accordance with KS F 2257-1 for 1 hour. Spalling did not occur with all specimens containing more than 0.10% of PP fiber except those with 15% of W/B. Moreover, it is interesting to note that the specimens with more than 10% of air content and with oven dried condition, respectively, had no spalling even if the content of PP fiber is 0.05 vol.%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.69 no.2
• /
• pp.88-96
• /
• 2024

Recently, interest in renewable energy development has been increasing to promote carbon-neutral policies. Agrivoltaic is a solar power generation facility with the potential to aid in meeting carbon-neutral policies. It has the advantage of generating electricity while farming takes place, but it also has the disadvantage of reducing crop yield and cultivation safety. We analyzed the rice yield, quality, and stem growth characteristics according to different transplanting densities under agrivoltaics. Under agrivoltaics, the number of rice panicles was reduced by the shading effect, but the reduction was lower under 60 hills than under 80 and 100 hills. Brown rice perfect ratio was increased under 60 hills under agrivoltaics. Brown rice yield did not differ significantly between 60 and 80 hills under agrivoltaics. However, stem dry weight by unit(mg/cm) in each internode showed highest under 60 hills compared to 80 and 100 hills under agrivoltaics. Therefore, 60 hill density was considered appropriate to ensure cultivation safety and yield when cultivated rice under agrivoltaics.