• 자원리싸이클링
• /
• 제26권4호
• /
• pp.19-25
• /
• 2017

금속실리콘을 제조하는 방법에는 탄소환원법, 플라즈마환원법, 테르밋반응 등이 있다. 상업용 금속실리콘을 대량 생산하는 방법으로 탄소환원법에 의한 아크전기로가 일반적으로 많이 사용되고 있다. 아크전기로를 이용한 생산시스템이 극복해야 할 문제로는 제조원가 중 전력비 비율이 30%를 차지할 정도로 높은 전기에너지 비용과 환경방지 시설구축 및 유지관리비용이다. 이러한 이유로 국내에서는 아직 아크전기로를 이용한 생산시스템이 상용화 제조시스템으로 구축되지 못하고 있다. 기업 및 연구기관에서 탄소환원법의 아크전기로를 이용하여 최적 생산시스템을 연구하고 있다. 세 가지 유형의 이산화규소를 테르밋반응을 통하여 순도변화를 알 수 있었다. 그리고 실험분석에서 테르밋반응을 사용하여 이산화규소 순도로 금속실리콘 순도 변화를 분석하였다. 이산화규소 순도와 금속실리콘 순도는 밀접한 관계가 있음을 알 수 있었다.

• 한국정보통신학회논문지
• /
• 제26권5호
• /
• pp.649-655
• /
• 2022

본 논문에서는 음성존재확률을 활용한 2채널 입력신호 상관행렬의 행렬식 기반 잡음제거 기법을 제안하였다. 제안한 기법은 음성존재확률을 이용해 기존의 행렬식 기반 2채널 잡음제거 기법의 위너 필터 이득을 음성과 잡음구간에 따라 적응적으로 조절함으로써 잡음제거 성능을 더욱 향상시키고자 하였다. 제안한 기법은 잡음 종류, 반향 조건, 신호대잡음비, 잡음원의 개수와 방향이 다양한 모의 환경에서 객관적 평가 방법을 통해 평가되었다. 실험 결과는 대부분의 실험환경에서 행렬식 기반의 기법들이 위상차를 기반으로 한 기법들보다 성능이 우수했고 특히 제안한 음성존재확률을 이용한 행렬식 기반 잡음제거기법이 음성 신호 왜곡을 최소화하면서 가장 우수한 잡음 제거 성능을 보였다.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.1094-1100
• /
• 2006

In this study, the reservoir sediment reduction methods for long-term operation are proposed by the analysis of both sediment deposit characteristics and sediment reduction effect by each method. To that end, a flowchart for sediment analysis in reservoir is established and sediment deposit is simulated by SMS-SED2D model. The sediment reduction methods which are sediment passing (sluicing), flushing, trapping, bypassing and mechanical removal are used. From the simulation results, the effective method for sediment reduction is operation which is coupled by both sediment passing with sand gate and sediment trapping with debris dam. And If sediment flushing will be used once a year after 50 years, conservation storage can be secured until 100 years after dam construction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.448-453
• /
• 2003

In this study, the effects of oxygen component in fuel and exhaust gas recirculation(EGR) method on the exhaust emissions has been investigated for a D.I. diesel engine. It was tested to estimate change of exhaust emission characteristics for the commercial diesel fuel and oxygenate blended fuel which has five kinds of blending ratio. Dimethoxy methane(DMM) contains oxygen component 42.5% in itself. and it is a kind of effective oxygenated fuel for reduction of smoke emission. It was affirmed that smoke emission was decreased with increasing of DMM blending ratio. But, NOx emission was increased compared with commercial diesel fuel. It was needed a NOx reduction countermeasure that EGR method was used as a countermeasure for NOx reduction. It was found that simultaneous reduction of smoke and NOx emission was achieved with DMM blended fuel and cooled EGR method($10{\sim}15%$).

• 천문학논총
• /
• 제28권1호
• /
• pp.7-13
• /
• 2013

We present a multi-dimensional reduction method of the surveyed cube database obtained using a single- dish radio telescope in Taeduk Radio Astronomy Observatory (TRAO). The multibeam receiver system installed at the 14 m telescope in TRAO was not optimized at the initial stage, though it became more stabilized in the following season. We conducted a Galactic Plane survey using the multibeam receiver system. We show that the noise level of the first part of the survey was higher than expected, and a special reduction process seemed to be definitely required. Along with a brief review of classical methods, a multi-dimensional method of reduction is introduced; It is found that the 'background' task within IRAF (Image Reduction and Analysis Facility) can be applied to all three directions of the cube database. Various statistics of reduction results is tested using several IRAF tasks. The rms value of raw survey data is 0.241 K, and after primitive baseline subtraction and elimination of bad channel sections, the rms value turned out to be 0.210 K. After the one-dimensional reduction using 'background' task, the rms value is estimated to be 0.176 K. The average rms of the final reduced image is 0.137 K. Thus, the image quality is found to be improved about 43% using the new reduction method.

• 한국환경과학회지
• /
• 제25권10호
• /
• pp.1407-1415
• /
• 2016

In this study, we investigated the relationship between noise reduction and the community structure of nine groups of typical plant communities as well as the reduction in noise at different frequencies. The semantic differential method was adopted to explore the perception of noise reduction. The results indicated that there was a significantly positive correlation between noise reduction and coverage, a significantly negative correlation between noise reduction and bifurcate height, and a negative correlation between noise reduction and bare rate. However, there was no significant correlation between noise reduction and height, diameter at breast height, or crown width. The reduction of middle-frequency noise was better than that of low- and high-frequency noise. The indicators "quiet" and "calm" showed that plant communities could reduce the noise perceived by humans. However, overly dense woodland caused nervousness, fear, depression, and other negative effects. Relatively open environments and those with large forest gaps obtained the highest evaluation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.105-108
• /
• 1997

This paper proposes a new approach of balanced model reduction using matrix pencil. The algorithm presented in this paper is to convert full-rank high-order system into rank-deficient system using perturbation made by matrix pencil method. Then the system can be truncated to a low-order system that we want via balanced realization. We discuss the comparison with other methods and the various observations by simulations.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.149-152
• /
• 2003

This paper presents a method to find motion vectors that are closer to true motion with noisy images for simultaneous noise reduction and do-interlacing. The proposed method requires four interlaced field images: one noisy field image and three field images from which noise is already removed. The validation of motion provides accurate motion vectors and allows us to utilize them even in very noisy environment. The validated motion vectors are first used for the noise reduction, buffered and used later for the noise reduction and de -interlacing.

• 오토저널
• /
• 제13권6호
• /
• pp.90-100
• /
• 1991

This paper represents the analysis of the sheet drawing by applying the Matrix method to Hill's slip-line field for small reduction and indirect type slip-line field in case of large reduction. Results of the analysis represent the relation between the reduction ratio and the die wall pressure, mean drawing stress through rough die. The limitation on the use of this slip-line field is described. When the reduction ratio is given, the optimum die angle is analyzed in this paper.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권1호
• /
• pp.1-5
• /
• 2012

Data reduction has been used widely in data mining for convenient analysis. Principal component analysis (PCA) and factor analysis (FA) methods are popular techniques. The PCA and FA reduce the number of variables to avoid the curse of dimensionality. The curse of dimensionality is to increase the computing time exponentially in proportion to the number of variables. So, many methods have been published for dimension reduction. Also, data augmentation is another approach to analyze data efficiently. Support vector machine (SVM) algorithm is a representative technique for dimension augmentation. The SVM maps original data to a feature space with high dimension to get the optimal decision plane. Both data reduction and augmentation have been used to solve diverse problems in data analysis. In this paper, we compare the strengths and weaknesses of dimension reduction and augmentation for classification and propose a classification method using data reduction for classification. We will carry out experiments for comparative studies to verify the performance of this research.