• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.12
• /
• pp.4036-4043
• /
• 1996

When a high-speed railway train enters a tunnel, a compression wave is generated ahead of the train and propagates along the tunnel, compressing and accelerating the rest air in front of the wave. At the exit of the tunnel, an impulsive wave is emitted outward toward the surrounding, which causes a positive impulsive noise like a kind of sonic boom produced by a supersonic aircraft. With the advent of high-speed train, such an impulsive noise can be large enough to cause the noise problem, unless some attempts are made to alleviate its pressure levels. In the purpose of the impulsive noise reduction, the present study tested the effect of porous walls on the compression wave propagating into a model tunnel. Experimental results were obtained using a shock tube with an open end. The results showed that the cavity/porous wall is very effective for the compression wave with a large nonlinear effect. The porosity of 30% is most effective for attenuation and pressure gradient reduction of the compression wave front. Also the impulsive noise reduction increases with increasing the length and height of the cavity, compared with the tunnel equivalent diameter.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.1
• /
• pp.119-125
• /
• 2016

The objective of this study was to investigate the effect of the fat reduction on the physicochemical and microbiological characteristics of fermented sausages during ripening and drying. Low fat fermented sausages were produced with different fat levels (30%, 20%, 10%, and 5%) under ripening conditions and fermented process. Samples from each treatment were taken for physicochemical and microbiological analyses on the 0, 1, 2, 3, 4, 5, 7, 10, 14, and 21st day of ripening. In proximate analysis, the fat reduction in sausages produced an increase in moisture, protein and ash contents during ripening and drying (p<0.05). The weight losses were significantly higher in high fat formulations during the first 4 days, whereas those were higher in low fat ones after 10 days of storage (p<0.05). Fat reduction was responsible for an increase in shear force values after 3 days of storage. The volatile basic nitrogen (VBN) value of the low fat samples was significantly higher (p<0.05). Low fat sausages reduced the extent of lipid oxidation. The lower fat level produced redder sausages. Total plate bacteria and Pseudomonas counts of sausages showed no significant differences. Production of low fat sausages resulted in the physicochemical and microbiological attributes equal to or better than the high fat sausages without negative effects, except only a higher VBN and weight loss.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.81-86
• /
• 2005

The purpose of this study is to develop venturi type after-burner in order to obtain pollutant reduction effect and find the best stable combustion condition. For this purpose, through a flow analysis, the shape of venturi type was made and flame holder locations were also decided by measuring chemical species at before and after the after-burner. Also, various chemical species concentration were measured at changing the induced air rates and the oxygen for oxygen enrichment for the solution the problems of much oxygen flow rate and the flame stability range. As results of this study, a flow distribution and the purification effect was excellent at venturi contraction 0.5 and flame holder location 12mm below the center of Venturi throat. On the purification characteristics, we found that pollutants reduction was effective when area ratio and oxygen are increased. But there are suitable quantities due to the flame shape change and combustion efficiency.

• Journal of Powder Materials
• /
• v.21 no.6
• /
• pp.447-453
• /
• 2014

Effect of oxygen content in the ultrafine tungsten powder fabricated by electrical explosion of wire method on the behvior of spark plasma sintering was investigated. The initial oxygen content of 6.5 wt% of as-fabricated tungsten powder was reduced to 2.3 and 0.7 wt% for the powders which were reduction-treated at $400^{\circ}C$ for 2 hour and at $500^{\circ}C$ for 1h in hydrogen atmosphere, respectively. The reduction-treated tungsten powders were spark-plasma sintered at $1200-1600^{\circ}C$ for 100-3600 sec. with applied pressure of 50 MPa under vacuum of 0.133 Pa. Maximun sindered density of 97% relative density was obtained under the condition of $1600^{\circ}C$ for 1h from the tungsten powder with 0.7 wt% oxygen. Sintering activation energy of $95.85kJ/mol^{-1}$ was obtained, which is remarkably smaller than the reported ones of $380{\sim}460kJ/mol^{-1}$ for pressureless sintering of micron-scale tungsten powders.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.203-214
• /
• 2010

This study is to assess the reduction of greenhouse gas emission and economic contribution by operating nuclear power plants in Korea. According to the results of applying greenhouse gas emission coefficients to the current nuclear power generation and the estimated nuclear power generation of national energy master plan, it is confirmed quantitatively that nuclear power contributes to reducing greenhouse gas emission, controlling inflation, and substituting import of fossil energies. For the reliable and cost-effective supply of energy and the active respondency to climate change, a continuous expansion of nuclear power is implied to be necessary.

• Korean Journal of Pharmacognosy
• /
• v.30 no.3
• /
• pp.244-249
• /
• 1999

In order to find less toxic antiviral agents from Basidiomycetes, EA, the water soluble substance, was prepared from the carpophores of Elfvingia applanata(Pers.) Karst. Antiviral activity of EA against vesicular stomatitis virus [Indiana serotype, VSV(IND)] was examined in Vero cells using plaque reduction assay in vitro. And the combined antiviral effects of EA with interferon (IFN) alpha or gamma were examined on the multiplication of VSV(IND). EA caused a concentration-dependent reduction in the plaque formation of VSV(IND) with 50% effective concentration $(EC_{50})$ of $104.02\;{\mu}g/ml$. The results of combination assay were evaluated by the combination index (CI) that was analysed by the multiple drug effect analysis. All cases of the combination of EA with IFN alpha or IFN gamma showed potent synergism with CI values of $0.38{\sim}0.52$ for $50{\sim}90%$ effective levels.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.194-201
• /
• 2006

Roof-fairing and deflector system have been used on heavy-duty trucks to minimize aerodynamic drag force not only for driving stability of the truck but also for energy saving by reducing the required driving power of the vehicle. In this study, a numerical simulation was carried out to see aerodynamic effect of the drag reducing device on the model vehicle. Drag and lift force generated on the five different models of the drag reducing system were calculated and compared them each other to see which type of device is efficient on the reduction of driving power of the vehicles quantitatively. An experiment has been done to see airflow characteristics on the model vehicles. Airflow patterns around the model vehicles were visualized by smoke generation method to compare the complexity of airflow around drag reducing device. From the results, the deflector systems(Model 5,6) were revealed as a better device for reduction of aerodynamic drag than the roof-fairing systems(Model 2,3,4) on the heavy-duty truck and it can be expected that over 10% of brake power of an engine can be saved on a tractor-trailer by the aerodynamic drag reducing device at normal speed range($80km/h{\sim}$).

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.6
• /
• pp.1062-1067
• /
• 2010

The purpose of this study was to estimate skin care effect of Miso Facial Rejuvenation Acupuncture with the facial skin photographing system and ultrasonography. 4 Patients who made first visits to Daegu Oriental Hospital of Daegu Hanny University from August 7, 2009 to August 12, 2009 were each given five-times treatments of Miso Facial Rejuvenation Acupunture. The facial skin photography of each participant was checked two times-pretreatment, posttreatment-using the facial skin photographing system and ultrasonography. The squares and counts of 2parts of facial winkles and thickness of masseter muscle were measured for each one. The squares and counts of facial wrinkles were decreased. The thickness of masseter muscle were decreased. On this study, we could evaluate the wrinkle treatment effects and reduction of masseter muscle of Miso Facial Rejuvenation Acupuncture by an objective method. Miso Facial Rejuvenation Acupuncture has notable effect in wrinkle treatment and reduction of masseter muscle. As though we had not wide experience in this treatment, more research is needed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.6
• /
• pp.634-640
• /
• 2009

Helmholtz resonator has been used, especially in intake and exhaust systems of vehicles, due to its good noise reduction characteristics at low frequencies. Many approaches have been developed to predict the acoustic behavior of the resonator with the assumption that there is no leakage from the resonator. However, its behavior may be affected by leakage which may exist in manufacturing processes or on purpose. This study investigates the effect of leakage on the noise reduction characteristics of Helmholtz resonator with two practical examples. One is a resonator with a gap between baffle and housing of the resonator and the other one is a resonator with two drain holes on the baffle. The measured transmission loss shows that the resonance frequencies are considerably shifted to higher frequency due to the leakage. The Boundary Element Method was applied to predict the transmission loss of the Helmholtz resonator with drain holes. The comparison between the measured and predicted transmission loss shows that the acoustic impedance of the holes is essential for accurate predictions of the transmission loss.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.126-130
• /
• 2008

We propose and experimentally demonstrate an effective method to reduce near-field speckle noise at the output of a 50 ${\mu}m$ graded index multimode fiber using a short cylindrical piezoelectric transducer(PZT) vibrating in the radial direction. The fiber was coiled as tightly as possible around the mandrel of the PZT and a periodic stretching effect was caused by the radial oscillations of the actuator. The output of the optical fiber using the He-Ne laser source was intensively observed by a CCD camera. By counting all the pixels corresponding to relative intensity graded into 256 levels in the selected area and by calculating standard deviation and mean value of the intensity, we could measure the speckle contrast and vibration effect quantitatively with reduction ratio of pixels and line profile of the illuminated region. It was clearly observed that the characteristics of the speckle pattern in the vibration-on state were significantly improved over that of the vibration-off state due to time-averaged smoothing.