• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.667-674
• /
• 2007

Various types of NOx storage catalysts for NGV's were designed, manufactured, and tested in this work on a model gas test bench. As in most of other studies on NOx storage catalyst, alkaline earth metal barium(Ba) was used as the NOx adsorbing substance. The barium-based experimental catalysts were designed to contain different amounts of Ba and precious metals at various ratios. Reaction tests were performed to investigate the NOx storage capacity and the NOx conversion efficiency of the experimental catalysts. From the results, it was found that when Ba loading of a catalyst was increased, the quantity of NOx stored in the catalyst increased in the high temperature range over 350. With more Ba deposition, the NOx conversion efficiency as well as its peak value increased in the high temperature range, but decreased in the low temperature range. The best of de-NOx catalyst tested in this study was catalyst B, which was loaded with 42.8 g/L of Ba in addition to Pt, Pd and Rh in the ratio of 7:7:1. In the low temperature range under $450^{\circ}C$, the NOx conversion efficiencies of the catalysts were lower when $CH_4$, instead of either $C_3H_6$ or $C_3H_8$, was used as the reductant.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.117-122
• /
• 2013

This study is aimed to develop LNT(Lean NOx Trap) aftertreatment system for DME engine. Modified DME engine, which was changed from diesel to current DME engine, is used for this research and is equipped with common rail type injector and fuel supplying system. LNT system has reductant injector. DME is also used as reduction agent. For this research, reduction agent injection time width and interval were varied. And also, swirler was used to improve homogeneity of reducing agent in exhaust pipe. The reduction rate of NOx by LNT was increased by longer injection width, short interval and swirler. The maximum diminution of NOx by LNT was over 85%.

• 열처리공학회지
• /
• 제8권4호
• /
• pp.333-339
• /
• 1995

The reduction and diffusion process(R-D process) is an economical way to produce the functional materials which contain rare-earth elements and has been applied to the production of rare-earth magnet meterials($SmCo_5$, $Nd_{15}Fe_{77}B_8$), magneto-optical(MO) target materials and hydrogen storage alloy, etc. However, because of difficult to control of the final composition, the R-D process has not been applied to production of the 2-17 type rare earth permanent magnet materials which contain several elements. Therefore, this work was as a basic study for the production of the 2-17 type rare earth permanent materials with composition $Sm(Co_{0.72}Fe_{0.21}Cu_{0.05}Zr_{0.03})_{7.9}$ by the R-D process, the following were mainy examined ; the amount of metallic calcium as a reductant, homogenization condition of the alloy after the R-D reaction, masuring of magnetic properties of the sample after step aging. The sample prepared by the R-D process contained a little more oxygen than that prepared by the melting method, however, showed almost the same magnetic properties.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.78-83
• /
• 2011

Diesel engine has many advantages such as high thermal efficiency, low fuel consumption and low emission of CO2. However, the diesel engine faced with strengthened emission regulation about NOx and PM. To suppress NOx emission, after-treatment systems such as Lean NOx Trap (LNT), Selective Catalytic Reduction (SCR) are considered as a more practical strategy. This paper investigated the performance of Lean NOx trap of the 4 stroke diesel engine which had a LNT catalyst. Characteristic of exhaust emission at NEDC mode was analyzed. From this result, the effect of nozzle attaching degree, injection quantity and gas flow change on NOx conversion performance was clarified.

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.168-174
• /
• 2005

Aluminum tri-butoxide was mixed with the water/ethanol solution and then chloroplatinic acid was added to the solution. The solution was dried at $100^{\circ}C$ for 15hrs to remove the solvent and water then it was calcined at $500^{\circ}C$. The catalyst was activated with a gas mixture. During the activation, the temperature was increased from $150^{\circ}C$ to $500^{\circ}C$. The necessary amount of urea was dissolved in 50mL water and injected. Aqueous urea solution was then mixed with the feed gas stream. At low temperatures, nitrogen containing compounds of urea decomposition are used as reductants in the reducton of $NO_X$. However at high temperatures the nitrogen containing compounds are oxidized to NO and $NO_2$ by oxygen instead of being used in the reduction. The activity of the catalyst was dependent on urea concentration in the feed stream when there was not adequate water vapor in the feed. The maximum conversion was shifted from $250^{\circ}C$ to $150^{\circ}C$ when water concentration was increased from 2 to 17%. It seems that the maximum temperature shifts to lower temperatures because the hydrolysis rate of HNCO increases with water, resulting in higher amounts of $NH_3$.

• Journal of Nutrition and Health
• /
• 제14권1호
• /
• pp.26-33
• /
• 1981

Crocin was extracted from Gardenia fructus in order to manufacture a natural food dye. In the extraction and purification process methanol and ethanol were used as the most Suitable solvent selected in preliminary test and 9.28%g/100g of Cretin product in 99.89% of purity was acquired. The lethal dose of Cretin administered in mouse by intra peridoneal was 5.36g/kg which is much lower toxic than any other. The toxic dose which caused diarrhoea in rat was 2.55g/kg and maximum no effect level was found to be 272mg/kg. From the $1%{\sim}2.5%$ content of Crocin in rat diet reduction of body weight appeared and GTP and GOT (Transaminase) value in creased significantly. Crocin showed a good properties of tolerating acid, alkali, sunlight, reductant, oxidant, and salt compared with tar dyes. The range from 100 ppm to 500ppm bring out bright $yellow{\sim}orange$ color, the most effective color, with a good solubility in water-slightly in oil. The acceptable daily intake of crocin was calculated as 2.72mg/kg based on maximum no effect dose (2% additive dose).

• 폴리머
• /
• 제38권4호
• /
• pp.484-490
• /
• 2014

Reduced graphene oxide (RGO) was fabricated using gelatin as a reductant, and it could be stably dispersed in gelatin solution without aggregation. A series of RGO/gelatin composite films with various RGO contents were prepared by a solution-casting method. The structure and thermal properties of the RGO/gelatin composite films were characterized by UV-vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), differential scanning calorimeter (DSC) and thermal gravimetric analysis (TGA). The addition of RGO enhances the degree of crosslinking of gelatin films and decreases the swelling ability of the gelatin films in water, indicating that RGO/gelatin composite films have a better wet stability than gelatin films. The glass transition temperature ($T_g$) of gelatin films is also increased with the incorporation of RGO. The presence of RGO slightly increases the degradation temperature of gelatin films due to the very low content of RGO in the composite films. Since gelatin is a natural and nontoxic biomacromolecule, the RGO/gelatin composite films are expected to have potential applications in the biomedical field.

• KSBB Journal
• /
• 제18권2호
• /
• pp.140-144
• /
• 2003

제올라이트로 충진된 수직 흐름 갈대 여과상에 인공하수를 주입하면서 처리효율을 조사하였다. 여과상 표면적 $m^2$당 1일 314 L의 인공하수가 6시간마다 10분 동안 간헐적으로 주입되었다 각 항목별 연중 평균 처리효율은 CO $D_{Cr}$ , 95.1%, T-N 49.5%, N $H_4$$^{+}$-N 99.4%, T-P 56.4%이었다. T-N의 처리효율은 가동 시간이 경과함에 따라 현저하게 감소하였다. 여과상의 상층에서 많은 인이 흡착되었으며 흡착된 인 중 대부분은 Fe-p, Ca-P와 환원가용성 Fe-P이었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4221-4226
• /
• 2011

Honeycomb-patterned polyvinypyrrolidone (PVP) thin films coated with nanometer-sized silver particles were prepared using honeycomb-patterned polystyrene (PS) template films fabricated by casting a polystyrene solution under humid condition. Silver was first metallized on the patterned PS films via silver nitrate ($AgNO_3$) reduction using tetrathiafulvalene (TTF) and a small amount of PVP as the reductant and dispersing agent, respectively. The effects of $AgNO_3$, TTF, and PVP solution concentrations during the reduction process in acetonitrile were determined to obtain a uniform silver-coated honeycomb-patterned PS film. Second, the silver-metallized patterned porous PS films were filled with high PVP concentration solutions via the spincoating process. Silver-coated patterned PVP films were obtained by peeling off the PVP layer from the template PS film after drying. The results show that the honeycomb-patterned PVP films uniformly coated with silver particles are conveniently obtained using the silver-coated patterned PS template, although the direct fabrication of these films using water droplets under humid conditions was not feasible because of the water solubility of PVP.

• 공업화학
• /
• 제5권1호
• /
• pp.37-43
• /
• 1994

포피린을 촉매로 하고 1, 4-dithiothreitol(DTT)과 황화수소 등 여러 가지 환원제의 존재하에서 니트로톨루엔을 아미노톨루엔으로 환원시켰다. 니트로톨루엔의 환원 결과 생기는 중간체 및 최종 생성물이 확인되었으며, 니트로기의 아미노기로의 환원에 대한 반응경로 및 최적 pH값을 구하였다. 포피린의 촉매로서의 기능이 UV/VIS분광분석에 의해 확인되었으며 또한 반응속도상수를 측정하였다. 환원제 중에서 DTT, sodium hydrosulfite 및 황화수소가 포피린을 촉매로 한 니트로톨루엔의 환원에 대해 탁월한 환원력을 나타냄을 알 수 있었다. 특히 황화수소가 환원제로 사용될 때는 기액 반응에 의해 기상의 황화수소와 액상의 니트로톨루엔이 동시에 제거되는 효과를 얻을 수 있었다.