• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.793-796
• /
• 2008

Recently early strength concrete has been required for economical assurance and the prevention of frost damage in winter through air reduction in construction of concrete structures. This study presented the optimum condition revealing compressive strength 5MPa which has the possibility of removal of form in 24 hours, and researched the changes of unit weight of cement types of high early strength AE water reducing agents, characteristic of compressive strength expression as cure temperature conditions and slump or airspace. Test results showed at $15^{\circ}C$ with compressive strength of 5MPa that premature removal of form was possible in case of using highly early strength PC water reducing agent with unit weight of cement 360 ; 22hours faster than 10, unit weight 360 ; 20hours faster than 7, unit weight 390 ; 18 hours faster than 4 comparing with OP water reducing agent. And at $5^{\circ}C$ in case of using highly early strength PC water reducing agent with unit weight of cement 330 ; 32hours faster than 10, unit weight 360 ; 30hours faster than 7, unit weight390 ; 27hours faster than 4 comparing with OP water reducing agent. Therefore as the temperature rises $10^{\circ}C$, compressive strength of 5MPa reaching hour shortens 10 hours.

• Herbal Formula Science
• /
• v.10 no.2
• /
• pp.57-72
• /
• 2002

To investigate the effect of Qi promoting-agents, clearing heat of deficiency type-agent, clearing heat of excessive type-agent, warming interior part of body-agent and Shihoieokgan-Tang against the immobilization stress, Cypri Rhizama, Auranti pericarpium, Aucklandiae Radix and Bupleuri Radix, Soyo-San, Hwangyeonhaedok-Tang, Geongangbuja-Tang and Shihoieokgan-Tang was administered intragastically 1hr prior to immobilizaiton stress and the change of corticosterone level has been measured by the flurometric method. The results obtained are as follows: 1. Qi promoting-agents(Cypri Rhizama, Auranti pericarpium, Aucklandiae Radix and Bupleuri Radix) showed mildly reducing effect or did not shown the reducing effect against the elevated coritocostereone level induced by the immobilization stress in the mice. 2. Hwangyeonhaedok-Tang, Gungangbuza-Tang, and Soyo-San did not show the reducing effect against the elevated corticostereone level induced by the immobilization stress in the mice. 3. Shihoieokgan-San was effective against the elevated corticosterone level induced by the immobililzation stress at 1g／kg, 3g／kg respectively. Consequently these data proved that Qi pomoting-agents as single herb(Cypri Rhizama, Auranti pericarpium, Aucklandiae Radix and Bupleuri Radix), clearing heat of deficiency type-agent(Soyo-San), warming interior part of the body(Gungangbuza-Tang), clearing heat of excessive type-agent(Hwangyeonhaedok-Tang) have no effect to decrease the elevated corticosterone level in mice exposed to the immobilization stress. Therefore our study revealed that Shihoieokgan-San which has the effects of herbs and formulae mentioned above decreased the elevated corticosterone level in mice exposed to the immobilization stress significantly.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.61-64
• /
• 2004

This study is to investigate the engineering and shrinkage properties of concrete incorporating shrinkage reducing agent(SRA) and expansive additive(EA) in order to reduce shrinkage of concrete. According to results, as for the properties of fresh concrete, increase in, SRA and EA content leads to reduce the fluidity but to increase the air content, and as for setting time, there is little difference. For strength properties, it decreased with an increase in SRA dosage and increased up to 5% of EA content. For the properties of drying shrinkage, it shows decline tendency with an increase in SRA and EA content reiteratively. It alto reduces significantly with the combination of SRA-EA systems due to the combined effect of the admixture. In the scope of this paper, it is found that the use of SRA with 0.5％ and EA with 5% has optimum effects on the various properties of concrete. And under the combination of SRA and EA, it can reduce drying shrinkage about 37%.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.2
• /
• pp.27-33
• /
• 2003

This survey was performed to investigate the NOx emission factors at 3 Municipal Solid Waste Incinerators(MSWI) and 5 Power generation boilers in Seoul. The NOx concentrations were measured before and after control systems. The results were as follows. 1) The NOx reduction efficiencies of Selective Catalytic Reduction (SCR) using ammonia as reducing agent ranged from 53.7% to 89.9%. The NOx reduction efficiencies of SCR using methanol as reducing agent, Non- Selective Catalytic Reduction (NSCR) using ethanol as reducing agent and low-NOx burner were 20.8%, 29.1% and 24.7%, respectively. 2) The NOx emission factors at A-1, A-2 and A-3 facilities of MSWI were 0.786, 0.127 and 0.594 kg Nox/ton fuel, respectively. The factors of A-1 and A-3 facilities were higher than the average value of Korea. 3) The NOx emission factors at B-1, B-2, B-3, B-4 and B-5 facilities of Power generation boiler were 2.109, 0.726, 4.106, 8.378 and 5.168 kg Nox/ton fuel, respectively. The factors of B-4 and B-5 facilities were higher than the average value of Korea.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.5
• /
• pp.130-137
• /
• 2012

Automotive engines need strategies to satisfy with the emission regulations in terms of PM and NOx. HC-LNT (Hydrocarbon-Lean NOx Trap) with secondary injection system is considered as more practical technology in order to cope with emission regulations. The HC-LNT system, which is using diesel fuel itself as a reducing agent, absorbs NOx in lean exhaust gas condition and releases NOx in rich exhaust gas conditions. In this system, inappropriate amounts of reducing agent will slip through the LNT without the profits of conversion and cause additional emission problems. Therefore, the suitable amount of reducing agent should be supplied into the catalytic converter. In this research, engine emission test was conducted to optimize injection quantity at the various engine test conditions. Different exhaust layouts and catalyst shapes have been studied and extension unit which makes better uniformity of exhaust gas was used for HC-LNT system. From this results, the effect of secondary injection conditions on NOx conversion characteristics of HC-LNT was clarified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3535-3541
• /
• 2015

In this study, series of tests were performed for drying shrinkage characteristics of concrete with power type shrinkage reducing agent (SRA) and fly ash as a part of research to reduce drying shrinkage of concrete. Firstly, for the mechanical properties, a target strength was acquired securely. In the unrestraint shrinkage tests, the SRA decreased the drying shrinkage about $200{\mu}{\varepsilon}$. Lastly, in the ring tests, due to the tensile creep effect, the concrete with SRA showed the cracking times as much again as the concrete with ordinary Portland cement only did.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.168-181
• /
• 2017

Whole cell of Phanerochaete chrysosporium with reducing agent was applied to verify the degradation mechanism of aromatic compounds derived from lignin precisely. Unlike the free-reducing agent experiment, various degraded products of aromatic compounds were detected under the fungal treatment. Our results suggested that demethoxylation, $C_{\alpha}$ oxidation and ring cleavage of aromatic compounds occurred under the catabolic system of P. chrysosporium. After that, degraded products stimulated the primary metabolism of fungus, so succinic acid was ultimately main degradation product of lignin derived-aromatic compounds. Especially, hydroquinone was detected as final intermediate in the degradation of aromatics and production of succinic acid. In conclusions, P. chrysosporium has an unique catabolic metabolism related to the production of succinic acid from lignin derived-aromatic compounds, which was meaningful in terms of lignin valorization.

• Korean Journal of Materials Research
• /
• v.29 no.7
• /
• pp.432-436
• /
• 2019

Zinc oxide(ZnO) micro/nanocrystals are grown via thermal evaporation of ZnO powder mixed with Mn powder, which is used as a reducing agent. The ZnO/Mn powder mixture produces ZnO micro/nanocrystals with diverse morphologies such as rods, wires, belts, and spherical shapes. Rod-shaped ZnO micro/nanocrystals, which have an average diameter of 360 nm and an average length of about $12{\mu}m$, are fabricated at a temperature as low as $800^{\circ}C$ due to the reducibility of Mn. Wire-and belt-like ZnO micro/nanocrystals with length of $3{\mu}m$ are formed at $900^{\circ}C$ and $1,000^{\circ}C$. When the growth temperature is $1,100^{\circ}C$, spherical shaped ZnO crystals having a diameter of 150 nm are synthesized. X-ray diffraction patterns reveal that ZnO had hexagonal wurtzite crystal structure. A strong ultraviolet emission peak and a weak visible emission band are observed in the cathodoluminescence spectra of the rod- and wire-shaped ZnO crystals, while visible emission is detected for the spherical shaped ZnO crystals.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.93-98
• /
• 2002

The effects of polymer-cement ratio, antifoamer content and shrinkage-reducing agent content on the air content, setting time and drying shrinkage of polymer-modified mortars using redispersible polymer powder are examined. As a result the air content of the polymer-modified mortars using redispersible polymer powder tend to decrease with increasing polymer-cement ratio and antifoamer agent content. Regardless of the antifoamer content, the setting time of the polymer-modified mortars using redispersible polymer powder tend to delayed with increasing polymer-cement ratio. Irrespective of the antifoamer content, the drying shrinkage of the polymer-modified mortars using redispersible polymer powder tend to decrease with increasing polymer-cement ratio and shrinkage-reducing agent content.

• Journal of ILASS-Korea
• /
• v.11 no.1
• /
• pp.30-38
• /
• 2006

High temperature furnaces such as power plant and incinerator contribute considerable part of NOx generation and face urgent demand of De-NOx system. Reducing agent is injected into the flue gas flow to activate do-NOx system. Almost SCR system adopt vaporized ammonia injection system. Vaporizer, dilution system and additional space are needed to gasify and inject ammonia. Liquid spray injection system can simplify and economize post-treatment system of flue gas. In this study, mixing caused by gas or liquid injection of reducing agent into flue gas duct was investigated experimentally. Carbonated water was used as tracer and simulated agent and mixing of liquid spray in a duct flow was studied. To achieve that, the angle of attack of static mixer is simulated and $CO_2$ concentration is measured.