• 한국의류학회지
• /
• 제47권6호
• /
• pp.1080-1095
• /
• 2023

Three-dimensional virtual fitting has become a trending practice in the fashion industry because of its productivity benefits, allowing garments to be virtually worn by avatar models without physical production. This study analyzed the variables influencing clothing pressure in both real and virtual fittings to expand the potential utility of pressure data derived from the latter. For this purpose, six sets of compression garments were created by combining two types of tricot fabrics and three types of reduced-pattern tops, with the clothing for real and virtual fittings having identical dimensions. Focus was directed to analyzing the correlation among clothing pressure, surface area deformation, and the mechanical properties of the fabrics. In real fittings, clothing pressure was influenced by multiple factors, including garment design, pattern reduction ratio, body shape, and fabric properties, consistent with existing knowledge. In virtual fittings, however, only the digital mechanical characteristics of the fabrics significantly influenced clothing pressure. The findings suggest that a more reliable implementation of clothing pressure in virtual fitting programs necessitates an approach that considers the complex structural information of garments.

• 항공우주기술
• /
• 제9권2호
• /
• pp.185-192
• /
• 2010

75톤급 터보펌프를 대상으로 한 속도복합형 터빈과 설계회전수를 50% 증가시킨 30톤급 터보펌프 터빈 적용을 위한을 압력복합형 터빈 설계를 수행하였다. 속도복합형 터빈의 경우 1차원설계-유동해석-1차원설계의 반복적인 설계과정을 통해 원형노즐을 적용한 2열 초음속 충동터빈의 특성을 파악하였으며 최종적으로 기본형인 1열 충동형 터빈 대비 비출력 23.1% 향상, 무게 5% 감소된 ver. 14h 모델을 완성하였다. 압력복합형 터빈은 에너지 회수 비율, 2단 노즐 출구각, 2단 노즐 누설유량, 단별 출력 비율 등의 새로운 인자의 고려하여 각 변수의 성능에 미치는 영향을 검토하였으며 1차원 해석 기준 비출력이 36%가 증대되고 무게는 51% 감소한 터빈을 설계하였다. 압력복합형 터빈의 높은 성능을 위해서는 1단 및 2단 노즐의 형상설계가 매우 중요할 것으로 판단되며 유동해석을 통해 최적화할 예정이다.

• 한국정보전자통신기술학회논문지
• /
• 제4권3호
• /
• pp.167-173
• /
• 2011

맥파를 정량적으로 측정하기 위해 다양한 맥진기가 개발되어 왔으며, 맥진기는 비침습적으로 맥파를 측정하기 위해 압력센서를 이용한다. 이러한 맥진기에 사용되는 맥진 센서 모듈은 압력센서와 압력센서의 와이어링을 보호하기 위한 코팅이 사용되는데, 코팅의 재질 또는 모양에 따라 측정 겨로가에 영향을 미칠 수 있다. 본 논문에서는 맥진센서에 압력을 가하였을 때 PDMS 코팅 형태에 따라 압력센서에 전달되는 응력분포를 비교하기 위해 6종류의 코팅모델에 두 가지 방법의 압력을 가하여 유한요소해석을 실시하였다. 결과적으로 맥진센서 중앙에 압력을 가하여 해석을 수행 하였을 때 맥진센서 모듈의 PDMS 코팅두께를 0.3mm씩 줄일수록 중앙의 압력센서에 전달되는 응력은 24%씩 증가하였고 주변의 압력센서로 전달되는 응력은 4.9%씩 감소하였다. 그리고 코팅에 가이드가 있는 경우 주변 압력센서로 전달되는 응력의 비율이 2.7% 더 적게 나타났다.

• The Journal of Korean Physical Therapy
• /
• 제13권1호
• /
• pp.1-18
• /
• 2001

Aging has been recognized as the primary cause of disc degeneration. A biomechanical characteristics of disc degeneration has been demonstrated that intradiscal pressure is reduced. With the increasing population of elderly people, disc degeneration and associated problems of nerve entrapment are becoming more prevalent. Presently, research on reduced intradiscal pressure associated with degeneration is insufficient. In this study. we used the Finite Element Method (FEM) of computerized simulations to investigate the effects of variation in intradiscal pressure on mechanical behaviours of L4-5 intervertebral disc degeneration. Degeneration was classified using four grades based on initial intradiscal pressure; Normal (135 kPa), mild(107 kPa), moderate (47 kPa) and severe (15 kPa). The predicted results f3r bending loads were as follows; 1 . Range of motion increased progressively with severity of degeneration with flexion and lateral bending moments, but decreased with extension moments. 2. Discal bulging of posterolateral aspect was larger in lateral bending and extension moment. But bulging was increased with severity of degeneration in lateral bending and torsion(same side).3. The rate of increasing intradiscal pressure was decreased in all bending motions with severity of degeneration. In conclusion, lateral bending and extension moment yield greatest bulging in severe degeneration. In torsion, although bending load produces disc bulging, disc bulging was associated more strongly with severity of degeneration than increasing torsional moments. Clinical Implications: Discal bulging may produce nerve root impingement and irritation. The effect of loading and posture on the varying degrees of disc degeneration has important implications especially in the elderly. In the presence of disc degeneration, avoidance of end range postures, especially extension and lateral bending may help reduce discal bulging and in turn, nerve entrapment.

• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.512-520
• /
• 2012

In this study, the numerical analysis for the flows around an axial cylinder is carried out in order to investigate the basic characteristics of drag of blunt body. A variation of drag and flow separation for the axial cylinder is investigated according to the length-diameter ratio. Also, the flow separation around the head is removed by rounding-off the front edge of the body to analyze the effect of drag reduction. Most of the drag turns out to be a pressure drag component and the variation of drag is caused by the change of pressure and velocity which is affected strongly by the flow separation at the edges of the axial cylinder. Especially, it is found that the pressure drag component acting on the back of axial cylinder, as known as the base drag, mainly changes the drag. As the length-diameter ratio of axial cylinder increases, the drag sharply decreases and the minimum is shown when the length-diameter ratio is about 2.4. Also, as the length-diameter ratio increases further above 2.4, the drag increases at a slower rate. The pressure drag is almost constant when the length-diameter ratio is greater than 8, but the increase of friction drag component is the reason for the increase of the drag. When flow separation is removed completely at the front edge of the axial cylinder, the pressure drag component is reduced to 12~17%, but the total drag is reduced to only 17%~32% due to the friction drag component that increases linearly proportional to the length-diameter ratio.

• 한국지진공학회논문집
• /
• 제2권1호
• /
• pp.11-21
• /
• 1998

해상에 설치된 기초말뚝의 경우 지진의 3가지 성분 즉, 지반의 수평운도, 지반의 연직진동에 의해 발생된 상부구조물과의 피드백 (feedback)에 의한 말뚝의 연직진동, 그리고 지반의 연직진동에 의해 유발된 해진(seaquake)의 진동이 말뚝 기초의 거동에 영향을 미친다. 본 연구에서는 유발된 해진의 진동을 해저면에서 유사화된 sine 정현파 형상의 동수압으로 모델링하였다. 해진(seaquake) 작용중 약 220m 이상의 심해에 설치된 개단 말뚝의 지지력은, 지반내에 유발된 과도한 과잉 간극수압으로 인하여, 심각하게 저감도었으며, 관내토 폐쇄력도 80% 이상 감소되었다. 해진중 관내토 선단 하부에서 발생된 과도한 과잉 간극수압으로 인하여 관내토내에 과도한 상향의 침투력이 유발되어 관내토 폐색이 손상되었다. 약 220m 이하의 천해에 설치된 개단말뚝의 지지력은 해진에 의해 약 10% 감소하였으며, 관내토의 폐쇄력은 5%이하만큼 감소하였다.

• 한국주조공학회지
• /
• 제28권5호
• /
• pp.204-210
• /
• 2008

• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.47-56
• /
• 2005

무인기의 INS/GPS/기압고도계 결합항법 시스템에서 수직채널감쇠루프를 사용하여 고도 오차를 보정할 때 비행 고도의 오차를 감소시키기 위해서 기압고도계의 정밀도를 향상시켜야한다. 피토정압관을 사용하여 기압 고도를 측정할 때 비행 속도와 자세 등의 변화에 따라 피토정압관 주위의 압력이 변하여 정압 오차에 의한 기압 고도의 오차를 유발한다. 정압 오차를 보정하기 위하여 풍동 시험과 CFD, 비행 시험 등의 자료를 이용하여 피토정압관 측정 압력의 변화를 분석하고 받음각과 비행 속도에 따른 압력 오차의 모델을 수립하였다. 비행 속도 변화에 의한 오차를 보정하기 위하여 피토정압관의 차압과 차압/정압 비를 사용한 두 가지 오차 모델에 대하여 압력 섭동에 대한 민감도 해석을 하였고 비행 시험에 적용하여 차압/정압 비를 사용한 모델이 고고도 비행 특성이 우수하다는 결론을 얻었다.

• 분석과학
• /
• 제33권1호
• /
• pp.11-22
• /
• 2020

When extracting semi-volatile components of herbal medicines using hot water vapor, some substances may react with water vapor or oxygen, and some volatile substances may be lost, when using an organic solvent extraction method has the disadvantage that it may contain a non-volatile material and residual organic solvent. In addition, it is inefficient to separate semi-volatile substances from herbal medicines into each single component and conduct biological activity research for each component to determine the effective ingredient, and some components may be lost in the separation process. In this study, semi-volatile substances evaporated under two pressure-reduced conditions in Chinese herbal medicines such as Cnidii Rhizoma, Aucklandiae Radix and Amomum Fructus were separated by cooling with liquid nitrogen. Those were analyzed by gas chromatography-mass spectrometry (GC-MS) to identify the components, and this method may be used to study biological activities at the cellular level. The substances separated under reduced pressure, essential oil obtained by simultaneous distillation extraction (SDE) method and substances by using solid phase micro-extraction (SPME) from Cnidii Rhizoma, Aucklandiae Radix and Amomum Fructus were analyzed by GC-MS. In the case of Cnidii Rhizoma and Aucklandiae Radix, there were some differences among the essential oil components obtained by SDE and those identified by low temperature capture (CT) and SPME method, these were believed to be produced by some volatiles reacting with water or oxygen at the boiling point temperature of water.

• Nutrition Research and Practice
• /
• 제9권2호
• /
• pp.180-185
• /
• 2015

BACKGROUND/OBJECTIVES: The aims of the present study are: 1) to quantify sodium consumption of patients with unstable or uncontrolled hypertension, 2) to investigate if reduced sodium intake can lower BP in these patients, and 3), to assess the acceptability and feasibility of this approach. SUBJECTS/METHODS: This study included 25 adults (age: 50+ years) with frequently elevated BP or patients with uncontrolled, uncomplicated hypertension despite drug treatment in a general practice setting. BP and salt intake (24h urinary excretion and food records) were measured at baseline and after a sodium reduced diet. RESULTS: Mean (${\pm}SD$) systolic (SBP) over diastolic (DBP) blood pressure (mmHg) at baseline was $150.7({\pm}9.5)$/$84.149({\pm}5.6)$. Mean urinary sodium excretion was 146 mmol/24h. A reduction of 28 mmol sodium excretion decreased SBP/DBP to $135.5({\pm}13.0)$/$82.5({\pm}12.8)$ (P < 0.001). After one month of no dietary advice, only in 48%, SBP was still ${\leq}140mmHg$. CONCLUSION: Assessment of sodium intake using food records, 24h urine collections and probing questions to identify use of sodium containing supplements or drugs are essential for tailored advice targeted at sodium intake reduction. The results of the present study indicate that reduced sodium intake can lower BP after 4 weeks in unstable or uncontrolled hypertensive patients.