• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.62-70
• /
• 1989

For the conduct of optimum design for such complicated and large structures as ship structure by direct structural analysis such as finite element method, it is very important problem that the process needs much computational efforts due to the repeated structural analysis. In this study, the reanalysis technique based on the modified reduced basis method is applied in the process to reduce the computing time required in repeated structural analysis. Numerical examples to simple grillage and actual ship structure are performed and applicability of reanalysis technique to structural optimization process is discussed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.18-25
• /
• 1994

If a 4-port network is terminated by arbitrary impedances, there are great advantageges in composing systems with it. The distributed 3-dB $O^{\circ}$/180$^{\circ}$ hybrid with the impedances asymmetrically terminated is presented. In the band of UHF and VHF. on the basis of it , the new design method of small sized- hybrid using both lumped and distributed elements is also presented and analyzed At the center frequency of 900MHz. 3-dB $O^{\circ}$/180$^{\circ}$hybrid on the RT/Duroid substrate of ${\varepsilon}_{r}$=2.2, h=0.76mm is design and tested. Agreements are obtained between measured and theoretical results and at the same time the occupied area of it is reduced more than 70% compared with only distributed-type circuits.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.249-256
• /
• 2002

A new optimization procedure with approximate reanalysis module, using the staged hybrid methods with substructuring, is proposed in is study. In this procedure, displacements are calculated with two step mixed procedures. First step is to introduce the conservative approximation, which is a hybrid form of the linear and reciprocal approximation, as local approximation. In the next step, it is combined with the global approximation by reduced basis approach. The quality of reanalyzed quantities can be greatly improved through these staged hybrid approximations, specially for large changes in the design. Overall procedures are based on substructuring scheme. Several numerical examples illustrate the validity and effectiveness of the proposed methods.

• Korean Journal of Remote Sensing
• /
• v.21 no.5
• /
• pp.433-443
• /
• 2005

This paper show that, without installation of expensive VR (Virtual Reality) program, the sharing information is possible through posting three-dimensional road structures on the web, and avoiding the conventional top-down decision making method, fast bottom-up communication is possible base on the Virtual GIS (Geographic Information System). In this paper, using Viewpoint Scene Builder, internet-based software, the transformation was conducted to give pertinent type for web posting. In order to use the completed route at the scene builder, the output with ASCII Export is required, and ASE (ASCII Scene Export) contains the property information including the coordinate and frame of mesh vertex. Through in advance recognition of the problems regarding route design and petition due to environmental rights infringement, the time and cost due to design alteration can be reduced. It's difficult to provide VR based on the internet because file that embodied with internet GIS was complicated and its capacity comes to scores of mega-bites. But, this study provides VR with internet according to a basis by simplification of files.

• Korean Institute of Interior Design Journal
• /
• v.14 no.1
• /
• pp.81-90
• /
• 2005

This study was intended to suggest the design guidelines of digital home on the basis of digital-related human behavior. In order to achieve this, what and how often internet was used in the home, how living pattern and space usage was changing according to digitalization were examined and lastly, the design guidelines of digital home based on these findings were suggested. The subjects were 400 housewives who lived In 85m'-sized housing unit of the new apartment complex in Busan. They were average age of 38 and their eldest children were in the stage of elementary schooling or preschooling. Many of them had relatively high educational level and middle income level. The results of the study were as follows; 1) The respondents used internet more frequently for information searching, children's education, and Internet shopping. Therefore, it would be desirable to divide zoning of housing unit into space for routine activities, space for working, and for cultural activities. 2) Digitalization changed human living pattern like follows; it reduced time of shopping, information searching, banking, and going out. Also, it increased time of spending alone, watching movie, and playing game. Therefore, digital home should be designed to facilitate social Interaction between family members, cultural and recreational activities, and indoor or outdoor exercise within each housing unit or in apartment complex.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.355.2-355
• /
• 1999

The spnng back phenomena occurring in the coiling process of a steam generator tube induces the dimensional inaccuracy and makes the coiling procedure difficult. In this research, an analytical model was developed to evaluate the amount of the spring back for SMART steam generator tubes. The model was developed on the basis of beam theory and elastic-perfectly plastic material property. This model was extended to consider the effect of plastic hardening and the effect of the tensile force on the spring back phenomena. Parametric studies were performed for various design variables of steam generator tubes in order to minimize the spring back in the design stage. A sensitivity analysis has shown that the low yield strength, the high elastic modulus, the small helix diameter, and the large tube diameter result in a small amount of the spring back. The amount of the spring back can be controlled by the selection of adequate design values in the basic design stage and reduced to an allowable limit by the application of the tensile force to the tube during the coiling process.rocess.

• Journal of KIISE:Software and Applications
• /
• v.31 no.1
• /
• pp.29-42
• /
• 2004

According to rapid growth of a web environment, usage-centered design is being highlighted. This paper suggests the development step and algorithm to generate a user interface prototype automatically on the basis of usage-centered design. For this purpose, The transition object of the user interface is modeled from requirement analysis, and an modeling rule as well as algorithms of business events are made for the creation of the user interface. Through these processes, visual cohesions of business events become strong and unskilled designers can develop the qualified user interface prototypes. A user's understanding of business tasks can also be improved and prototype iterations reduced.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.837-842
• /
• 2000

In the coiling process of helical steam generator tubes of integral reactor SMART, a considerable amount of spring back, which induces dimensional inaccuracy and difficulty in fabrication, has been arised. In this research, an analytical model was derived to evaluate the amount of the spring back for steam generator tubes. The model was developed on the basis of beam theory and elastic-perfectly plastic material property. This model was extended to consider the effect of plastic hardening and the effect of the tensile force on the spring back phenomena. Parametric studies were performed for various design variables of steam generator tubes in order to minimize the spring back in the design stage. A sensitivity analysis has shown that the low yield strength, the high elastic modulus, the small helix diameter, and the large tube diameter result in a small amount of the spring back. The amount of the spring back can be controlled by the selection of adequate design values in the basic design stage and reduced to an allowable limit by the application of the tensile force to the tube during the coiling process.

• The Journal of the Korea Contents Association
• /
• v.8 no.4
• /
• pp.79-85
• /
• 2008

These days, orthogonal frequency division multiplexing (OFDM) transmission method is widely used for broadband communication systems. The OFDM, which uses sine waves as orthogonal basis functions, is one of the orthogonal waveform modulation techniques. In this paper, we investigate a wavelet packet modulation method which uses wavelet packets instead of sine waves as the basis functions. The wavelet packets may have different patterns in two dimensional time-frequency domain, and we can design the packets appropriate for the channel environments with much flexibility. In this paper, we investigate the characteristics of the wavelet packet modulation as one of the multicarrier modulation methods, And we illustrate by simulations that narrowband interference can be reduced effectively by control the bandwidth of the wavelet packets.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.4
• /
• pp.383-395
• /
• 2014

According to the requirement of wing weight estimation and frequent adjustments during aircraft conceptual design, a wing weight estimation method considering the constraints of structural strength and stiffness is proposed to help designers make wing weight estimations rapidly and accurately. This method implements weight predictions on the basis of structure weight optimization with stiffness constraints and strength constraints, which include achievement of wing shape parametric modeling, rapid structure layout, finite element (FE) model automated generation, load calculation, structure analysis, weight optimization, and weight computed based on modeling. A software tool is developed with this wing weight estimation method. This software can realize the whole process of wing weight estimation with the method and the workload of wing weight estimation is reduced because much of the work can be completed by the software. Finally, an example is given to illustrate that this weight estimation method is effective.