• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.34-40
• /
• 2014

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers and the old corrugated container (OCC) furnish were refined, and mixed together to form paperboard. At optimum mixing ratios and refining degrees, stiffness and tensile strength of the MDF fiber-containing board were higher than those of the board with 100% OCC. It was found that there was possibility to reduced basis weight of the filler layer down to 90% of the all OCC furnish by judicious selection of the mixing ratio and the refining method of the MDF fibers. Drainage rate increase and potential drying energy savings were additional benefits.

• Wind and Structures
• /
• v.1 no.3
• /
• pp.243-253
• /
• 1998

The paper deals with numerical analysis of interference galloping of two elastically supported circular cylinders of equal diameters. The basis of the analysis is quasi-steady model of this phenomenon. The model assumes that both cylinders participate in process of interference galloping and they have two degrees of freedom. The movement of the cylinders is written as a set of four nonlinear differential equations. On the basis of numerical solutions of this equations the authors evaluate the correctness of this quasi-steady model. Then they estimate the dependence of a critical reduced velocity on the Scruton number, turbulence intensity and arrangements of the cylinders.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.657-660
• /
• 2003

Control of multi-link robot arms is a very difficult problem because of the highly nonlinear dynamics. Decentralized control scheme is developed for control of robot manipulators based on RBF(Radial Basis Function) Neural Networks. RBF Neural Networks is used to approximate the coupling forces among the joints, coriolis force, centrifugal force, gravitational force, and frictional force. The compensation controller is also proposed to estimate the bound of approximation error so that the chattering effect of the control effort can be reduced. The proposed scheme does not require an accurate manipulator dynamic, and it is proved that closed-loop system is asymptotic stable despite the gross robot parameter variations. Numerical simulations for two-link robot manipulator are included to show the effectiveness of controller.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.5
• /
• pp.275-282
• /
• 2018

Using isogeometric analysis(IGA) gives more accurate results for higher order mode in eigenvalue problem than using the finite element method(FEM). This is because the FEM has $C^0$ continuity between elements, whereas IGA guarantee $C^{P-1}$ between elements for p-th order basis functions. In this paper, a mode based reduced model is constructed by using IGA and dynamic behavior analysis is performed using this advantage. Craig-Bampton(CB) method is applied to construct the reduced model. Several numerical examples were performed to compare the eigenvalue analysis results for various order of element basis function by applying the IGA and FEM to simple rod analysis. We have confirmed that numerical error increases in the higher order mode as the continuity between elements decreases in the IGA by allowing internal knots multiplicity. The accuracy of the solution can be improved by using the IGA with high inter-element continuity when high-frequency external force acts on the reduced model for dynamic behavior analysis.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.2
• /
• pp.89-95
• /
• 1993

A Nuluk, a Korean traditional Koji for brewing, was made with wheat flour and Aspergillus oryzae L2 which had a good aroma and strong abilities In producing saccharogenic and dextrogenic enzymes. The cultural conditions for the production of saccharogenic and proteolytic enzymes were tested. The productivity of dextrogenic enzyme was improved when Nuluk was made with unsteamed wheat flour as compared with steamed one, but that of proteolytic enzyme was reduced. The addition of water containing 0.5% hydrochloric acid was unfavorable for the production of those two enzymes. The optimum ratio of water added to wheat flour for the production of those two enzymes was 28$^{\circ}C$ on the basis of wheat flour, The productivity of saccharogenic enzyme was enhanced when the Nuluk was molded after 20 hours of precultivation, but that of proteolytic enzyme was reduced as compared with no molding. The optimum temperatures for the production of saccharogenic enzyme and proteolytic enzyme were 36$^{\circ}C$ and 28$^{\circ}C$, respectively.

• Journal of Mechanical Science and Technology
• /
• v.16 no.12
• /
• pp.1643-1651
• /
• 2002

Magnetic levitation systems are required to have a large operating range in many applications. As one method to solve this problem, Time Delay Control (TDC) is applied to a single-axis magnetic levitation system in this paper A reduced-order observer is utilized to estimate states excluding measurable states in the control law. The system consists of a square air-core solenoid and a circular permanent magnet attached on a plastic ball. Theoretical magnetic forces of the system are obtained on the basis of the location of the magnet around the solenoid. The magnetic levitation force is obtained by the experiment, and then compared with the theoretical one. As the results of the control experiments, the nonlinear controller (TDC : 1-2 ㎜) has a larger operating range than the linear controller (PD control : 1-1.4 ㎜), and is superior to linear. control in the robustness to the modeling uncertainty and the performance of the disturbance rejection.

• Journal of Biosystems Engineering
• /
• v.31 no.6 s.119
• /
• pp.535-540
• /
• 2006

For a biosensor development, an enzyme-linked immunosorbent assay (ELISA) of the fungicide iprovalicarb was developed by minimizing the processing time. The time for whole incubation process was reduced from 135 minutes to 15 minutes. The concentration of antibody was varied to improve sensitivity. The total processing time was reduced from 2.5 hours to 20 minutes, the final sensitivity ($IC_{50}$ value) of 7.93 ng/mL and the lowest detection limit of 0.045 ng/mL were obtained. This ELISA was applied to potatoes and onions, and the recoveries were in the range of 98.85 $\sim$ 101.20% and 87.97 $\sim$ 102.70%, respectively. Accordingly, this method can be used as basis for a biosensor for rapid monitoring of iprovalicarb residues in crops.

• Wind and Structures
• /
• v.19 no.6
• /
• pp.649-663
• /
• 2014

The present paper discusses the characteristics of unsteady aerodynamic forces on long-span curved roofs. A forced vibration test is carried out in a wind tunnel to investigate the effects of wind speed, vibration amplitude, reduced frequency of vibration and rise/span ratio of the roof on the unsteady aerodynamic forces. Because the range of parameters tested in the wind tunnel experiment is limited, a CFD simulation is also made for evaluating the characteristics of unsteady aerodynamic forces on the vibrating roof over a wider range of parameters. Special attention is paid to the effect of reduced frequency of vibration. Based on the results of the wind tunnel experiment and CFD simulation, the influence of the unsteady aerodynamic forces on the dynamic response of a full-scale long-span curved roof is investigated on the basis of the spectral analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.159.2-159
• /
• 2001

The new approach of homogeneous robust control systems synthesis, both linear, and nonlinear and non-stationary is offered. The control is carried out, providing the given phase constrains varied in acceptable limits, in view of constrains on its value and incompleteness of the information about functioning disturbances. The approach is based on introduction of auxiliary integral surfaces, on which the initial moving is projected. As a result the reduced equivalent moving is forming, described by the scalar equation which in many important cases can be integrated directly. On the basis of the obtained equation solving of a synthesis task is carried out and can be reduced to algebraic or integral inequalities. The final relations defined for linear equivalent moving are presented.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.73-78
• /
• 2006

The occurrence of detrimental substances in the paper machine leads to reduced economic performance of paper mills through reduced capacities due to increased paper breaks and cleaning times. In this article the latest generation of BASF's laser optical pitch particle counter is employed in the examination of a paper mill operating two paper machines and using a mixture of thermo-mechanical pulp and recycled fibres. The potential of the new instrument to differentiate between particles on the basis of size and chemical composition is discussed. In addition, direct evidence of the periodic and locational variation of detrimental substances in the paper machine is given. Finally, an example of the application of BASF's laser optical pitch particle counter in the selection of a suitable fixative system for a complex furnish is presented.