• 제목/요약/키워드: recycling waste glass

검색결과 114건 처리시간 0.031초

The Performance and Evaluation for Recycling of Waste Glass

  • Chang, Tein-Chin;Huang, Jian-Er;Yen, Jia-Huei
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.80-83
    • /
    • 2001
  • According to the EPA in Taiwan report, 9.05 million metric tons of solid wastes were generated in 1999, and the waste glass was accounted of 4.95 percent. However, with the increasing tonnage of disposal cost and existing disposal sites are reaching full capacity, recycling is currently accepted as a sustainable approach to waste management. Therefore, it's essential and urgent that the government in Taiwan establish the recycling and recovery framework for the minimization of the solid waste, reduction of materials and energy consumption, and the encouragement for the reuse, recycle and recovery development. To achieve this Boal, Taiwan has been strived for a long period of time in waste glass recovery and recycle. Waste glass, unlike other kinds of resource waste, is 100% recyclable. The EPA in Taiwan now center on a lot of different kinds of waste glass, such as glass container, flat glass, CRT glass, windshields glass, fluorescent lamps, and waste pesticide glass container. This article will focus on the framework of the recycling market access, and also try to provide some strategies to improve waste glass recycling efficiently.

  • PDF

폐 TFT-LCD 유리분말을 혼입한 고강도 콘크리트 파일의 특성 (The Characteristics of P.H.C Pile using Admixture by Waste TFT-LCD Glass Powder)

  • 전성환;민경산;소양섭
    • 한국세라믹학회지
    • /
    • 제47권5호
    • /
    • pp.419-425
    • /
    • 2010
  • In order to examine the P.H.C pile raw material using glass forming ceramic. The used materials is ordinary portland cement, waste TFT-LCD glass powder and reactive agent(Ca$(OH)_2$). The first experiment is characteristics analysis of the waste TFT-LCD glass powder, For the second experiment is mortar and concrete compressive strength for using of the concrete file raw material for waste TFT-LCD glass powder. The results of experiment showed that the substitution ratio of 10% waste TFT-LCD glass powder and 1% reactive agent(Ca$(OH)_2$) was excellent at a point of view for the physical characteristic. The study's most important finding is that the recycling of waste TFT-LCD glass powder.

폐 LCD판넬의 유가성분 회수를 위한 폐 LCD유리의 발포공정 (Foaming Process of Waste LCD Glass for the Recovery of Valuable Materials from Waste LCD Pannel)

  • 이철태;박태문;김정민
    • 공업화학
    • /
    • 제23권2호
    • /
    • pp.195-203
    • /
    • 2012
  • 폐 LCD유리의 재활용 방안은 평판 디스플레이용 폐 LCD판넬의 전체 재활용 공정의 확립을 위한 중심요건이다. 본 연구는 폐 LCD유리를 보온단열재, 흡음차음제, 토목용 경량골재 또는 수처리용 담체 등의 원료로 재활용하기 위한 발포공정의 기초공정으로서 폐 LCD유리의 분쇄특성, 적절한 탄소발포제의 선정, 유가물 회수를 위한 산침출 후 잔유된 유리질의 물성 및 이들의 발포화의 문제점을 조사하였다. 폐 LCD유리의 분쇄공정을 통해 발포용 원료로 사용가능한 미분화가 가능하였으며, 고융점을 갖는 LCD 유리의 발포화를 위해서는 결정성 천연흑연이 적절하였으며, 산 침출 후 잔사인 슬러지 상태의 폐유리성분도 발포체의 원료로 재활용될 수 있음을 확인하였다.

폐 평판디스플레이 패널유리의 재활용 연구 동향 (Current Research Trend on Recycling of Waste Flat Panel Display Panel Glass)

  • 신동윤;강이승;박재량;이찬기;윤진호;홍현선
    • 자원리싸이클링
    • /
    • 제24권1호
    • /
    • pp.58-65
    • /
    • 2015
  • 국내 디스플레이 산업의 핵심기술과 글로벌 점유율은 세계 최고 수준이지만 폐 디스플레이의 재활용 관련한 전반적 기술은 매우 미흡하고 폐 디스플레이의 유리소재는 전량 매립하고 있는 실정이다. 본 논문에서는 폐 초박막 액정표시장치(Thin Film Transistor Liquid Crystal Display) 유리를 고강도 콘크리트 파일 및 발포체의 원료로 재활용 하는 연구, 초박막 액정표시장치 제조 공정에서 발생하는 불량품인 파유리를 장섬유 및 단섬유 등으로 재활용 하는 연구 동향에 대하여 조사하였다. 폐유리를 재활용한 원료 성분은 고강도 콘크리트 파일과 발포체 원료로 재료 재활용이 가능한 것으로 입증되었으며 특히 콘크리트 파일의 경우 기존 제품보다 향상된 특성을 나타내었다. 이외에도 파유리를 장섬유나 단섬유로 재활용 하는 기술은 이미 상용화 단계에 있으므로 향후 폐 디스플레이 유리 소재의 상용화 재활용 시스템을 구축할 수 있는 기술을 확립하는 방향으로 연구를 진행할 필요가 있다.

Dissolution Technology Development of E-Glass Fiber for Recycling Waste of Glass Fiber Reinforced Polymer

  • Lee, Suyeon;Kim, Woo Sik
    • 한국세라믹학회지
    • /
    • 제56권6호
    • /
    • pp.577-582
    • /
    • 2019
  • Recently, E-glass fiber is the one of most widely used ceramic fiber for aerospace fields. Recycling technology for waste of wind power blades is arising issue for reasons of low manageability and high cost of wastes. Though glass fiber is perfectly dissolved in hydrofluoric acid, low cost for recycling and harmless to human is important for recycling of blades. Chemically melted glass fiber will be used as different purpose like accelerator of hardening for shotcrete. In this study, dissolution process of glass fiber is tested in NaOH solution at low temperatures. In addition, difference in diameter reduction of glass fiber is observed by various alkali concentration and reaction times, treatment temperatures using FE-SEM.

폐유리를 골재로 사용한 불포화폴리에스테르 모르타르의 내산성에 관한 연구 (Acid Resistance of Unsaturated Polyester Mortar Using Crushed Wate Glass)

  • 한창호;최길섭;김완기;조영국;소양섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2000년도 봄 학술발표회 논문집
    • /
    • pp.339-342
    • /
    • 2000
  • Recently, the importance of the conutermeasures for waste materials has pointed out. Waste glass is also one to waste materials used for the recycling in construction sites. The crushed waste glass has been used to make a glass polymer composite that can be applied for sewer, storm drain pipe and interlocking block, etc. In this study, the crushed waste glass is explored with the possibility of recycling it, as a substitute for fine aggregates. The prepose of this investigation is to improve the strengths and acid resistance of the UP mortars using crushed waste glass. The UP mortars are prepare with blast furnace slag fly ash filler. the UP-fine aggregate ratios the crushed waste glass replacements for fine aggregate are tested strengths before and after immersion(H (아래첨자2)SO(아래첨자4) 10%), weight change and acid resistance are also tested. From the test results, the relative strength or UP mortars using fly ash as filler are found to be somewhat superior to that of the UP mortars using blast furnace as filler, And a UP mortar with fly ash as a filler, a UP-fine aggregate ratio of 15% and a waste glass replacement if 50% for fine aggregate is recommended as optimal mix proportion of UP mortar using crushed waste glass. Accordingly, it is enough to assure the use of the crushed waare glass as an aggregate for the production of UP mortar.

  • PDF

폐유리와 산화 그래핀을 사용한 시멘트 모르타르의 물성 연구 (Physical Characteristics of Cement Mortar Prepared Using Waste Glass and Graphene Oxide)

  • 김경석;추용식
    • 자원리싸이클링
    • /
    • 제28권6호
    • /
    • pp.54-63
    • /
    • 2019
  • 본 연구에서는 폐유리를 골재로 재활용하고자 폐유리와 산화 그래핀을 사용한 시멘트 모르타르의 압축강도 및 길이 변화율 등을 검토하였다. 3일 및 7일 압축강도는 일반 모래 대체용 폐유리 사용량이 증가할수록 상승하였다. 특히, 폐유리 사용량이 10~50% 범위일 경우, 압축강도는 큰 폭으로 상승하는 경향을 나타내었다. 더불어 폐유리 50% 조건에서도 산화 그래핀의 첨가량이 증가됨에 따라 압축강도가 상승하였으며, 0.2%를 첨가하였을 때, 압축강도는 42.6 N/㎟ 이었다. 폐유리의 사용량이 증가됨에 따라 모르타르의 길이 변화율은 증가하였으나, 50% 이상에서는 길이변화율이 감소하는 경향도 나타내었다. 폐유리 사용량 50% 모르타르에서는 산화 그래핀 첨가량이 증가할수록 길이 변화율이 감소하는 경향을 나타내었으며, 이는 산화 그래핀의 시멘트 수화반응 촉진작용과 이온이동 억제효과로 추정되었다.

폐유리를 잔골재로 사용한 차폐채움재의 내구성 개선을 위한 혼화재료의 성능평가 (Performance Evaluation of Admixture for Durability Improvement of Shielding Materials Used Waste Glass as Fine Aggregate)

  • 황병일;김효정;송용순;이성태
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제23권2호
    • /
    • pp.20-27
    • /
    • 2019
  • 건전자제품의 개발과 생산기술에 비교하여 폐유리의 재활용을 위한 기술개발은 상대적으로 미흡하여 자원낭비와 환경오염이 가속화되고 있다. 해외에서는 이 분야에 대한 기술개발이 활발하게 이루어지고 있으나 국내의 경우, 그 관심도가 부족하여 폐유리를 불법투기 또는 매립으로 처리하고 있는 실정이다. 폐유리는 시멘트와 수화반응시 포졸란 반응가능성이 있는 것으로 확인되어 경화 콘크리트의 물리적 성질을 향상시키고 굳지 않은 콘크리트의 레올로지 특성을 개선하여 블리딩의 저감 및 수화열 발생의 억제 등에 효과적인 것으로 보고되고 있다. 따라서 본 논문에서는 폐유리를 잔골재로 사용한 차폐콘크리트의 알칼리-실리카반응이 팽창에 미치는 영향을 분석하고 폐유리 혼입에 의한 알칼리-실리카반응의 팽창을 억제하기 위한 방안으로 적정 혼화재료를 사용하여 차폐콘크리트의 내구성능을 평가하였다.

폐자동차 유리의 재활용 현황 (Overview and Recycling of Waste Automobile Glass)

  • 윤진호;박경수;홍명환;박재량;이찬기
    • 자원리싸이클링
    • /
    • 제24권1호
    • /
    • pp.51-57
    • /
    • 2015
  • 유리는 고대시대부터 현재에 이르기까지 지속적으로 사용되고 있으며, 최근에는 최첨단 기술이 추가된 스마트 유리산업이 성장하고 있다. 이러한 스마트 유리는 라이프 사이클이 기존 유리보다 빠르기 때문에 교체 주기에 발맞춰서 재활용을 위해 보다 근본적이고 핵심적인 기술 개발이 필요한 상황이다. 스마트 유리 중에서 재활용 기술 개발이 가장 시급한 분야는 자동차 분야이며 자동차 폐차 시에 폐기되는 스마트 유리의 양은 연간 약 23,000톤 이상인 것으로 보고되고 있다. 본 논문에서는 국내 자동차 유리의 현황을 살펴보고, 국내의 재활용 기술과 재활용 방안 등에 대해 소개하고자 한다.

Properties of Wollastonite-Reinforced Glass-Ceramics Made from Waste Automobile Glass and Waste Shell

  • Yun, Yeon-Hum;Yoon, Chung-Han;Kim, Chi-Kyun;Hwang, Kyu-Seog
    • 자원리싸이클링
    • /
    • 제13권1호
    • /
    • pp.54-58
    • /
    • 2004
  • Wollastonite-type glass ceramics were prepared by milling and firing at various temperatures using an automobile waste glass and waste shell as starting materials. Powder mixture ground by disk-type ball mill for 3 hours was pressed into a disk. The pressed specimen was fired at $850^{\circ}C$,$950^{\circ}C$ and $1050^{\circ}C$ for 1 hour in air. From FE-SEM observation, with an increase of the firing temperature from $850^{\circ}C$ to $1050^{\circ}C$, whisker-type phase was grown to about 10 $\mu\textrm{m}$ in length. Specimen fired at $1050^{\circ}C$ showed the formation of well-crystallized whisker-type wollastonite grains and the highest compressive strength.