• Journal of the Korean Wood Science and Technology
• /
• 제47권4호
• /
• pp.472-485
• /
• 2019

When wood plastic composites (WPCs) have been used for a certain period of time, they become waste materials and should be recycled to reduce their environmental impact. Waste WPCs can be transformed into reinforced composites, in which fillers are used to improve their performance. In this study, recycled WPCs were prepared using different proportions of waste WPCs, nanoclay, and glass fiber. The effects of nanoclay and glass fiber on the microstructural, mechanical, thermal, and water absorption properties of the recycled WPCs were investigated. X-ray diffraction showed that the nanoclay intercalates in the WPCs. Additionally, scanning electron micrographs revealed that the glass fiber is adequately dispersed. According to the analysis of mechanical properties, the simultaneous incorporation of nanoclay and glass fiber improved both tensile and flexural strengths. However, as the amount of fillers increases, their dispersion becomes limited and the tensile and flexural modulus were not further improved. The synergistic effect of nanoclay and glass fiber in recycled WPCs enhanced the thermal stability and crystallinity ($X_c$). Also, the presence of nanoclay improved the water absorption properties. The results suggested that recycled WPCs reinforced with nanoclay and glass fiber improved the deteriorated performance, showing the potential of recycled waste WPCs.

• 농업과학연구
• /
• 제38권1호
• /
• pp.145-151
• /
• 2011

This study was performed to evaluate the void ratio, compressive and flexural strength, and permeability coefficient used powdered waste glass, $CaCO_3$, recycled coarse aggregate and unsaturated polyester resin to find optimum mix design of permeable polymer concrete for pavement. The void ratio and permeability coefficient of permeable concrete for pavement was decreased with increasing the powdered waste glass, respectively. The compressive strength and flexural strength was increased with increasing the powdered waste glass, respectively. In addition, this study found out that required amount of binder was decreased with increasing the powdered waste glass. This fact is expected to have economical effects during the use of powdered waste glass in the manufacture of permeable polymer concrete for pavement. Therefore, powdered waste glass and recycled coarse aggregate can be used for permeable polymer pavement.

• 한국농공학회논문집
• /
• 제53권6호
• /
• pp.59-65
• /
• 2011

This study was performed to evaluate the compressive and flexural strength, void ratio and permeability coefficient used powdered waste glass, $CaCO_3$, recycled coarse aggregate and unsaturated polyester resin to find optimum mix design of permeable polymer concrete for pavement. The compressive and flexural strength of permeable polymer concrete for pavement using powdered waste glass were in the range of 16.8~19.7 MPa and 4.7~6.1 MPa, respectively. it was satisfied the regulation of permeable concrete for pavement (18 MPa and 4.5 MPa). The void ratio and permeability coefficient were decreased with increasing the powdered waste glass, respectively. The void ratio and permeability coefficient were satisfied national regulation of permeable concrete for pavement (8 % and $1{\times}10^{-2}$ cm/s). In addition, this study found out that required amount of binder was decreased with increasing the powdered waste glass. This fact is expected to have economical effects during the use of powdered waste glass in the manufacture of permeable polymer concrete for pavement. Accodingly, the powdered waste glass can be used for permeable concrete material.

• 한국건설순환자원학회논문집
• /
• 제8권3호
• /
• pp.302-309
• /
• 2020

건설폐기물 중간처리시설에서 발생하고 있는 폐슬러지를 건조 분쇄한 순환 슬러지와 재활용되지 못하는 폐유리병을 가공처리한 순환 유리골재를 순환 상온아스팔트에 적용하기 위한 기초연구로서 순환 슬러지 및 순환 유리골재의 사용에 따른 순환 상온아스팔트의 특성을 비교·검토하였다. 그 결과 순환 슬러지를 채움재로서 사용량을 증가할수록 순환 상온아스팔트 혼합물의 마샬 안정도, 간접인강강도, 인장강도비는 감소하고 흐름값, 공극률은 증가하는 것으로 나타났다. 또한 순환 유리골재를 사용함으로서 순환 상온아스팔트 혼합물의 마샬 안정도, 간접인강강도, 인장강도비는 감소하고 흐름값, 공극률은 증가하는 것으로 나타났다.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.433-440
• /
• 2018

Pavements porous concrete is a noble structure design in the urban management development generally enabling water to be permeated within its structure. It has also capable in the same time to cater dynamic loading. During the technology development, the quality and quantity of waste materials have led to a waste disposal crisis. Using recycled materials (secondary) instead of virgin ones (primary) have reduced landfill pressure and extraction demanding. This study has reviewed the waste materials (Recycled crushed glass (RCG), Steel slag, Steel fiber, Tires, Plastics, Recycled asphalt) used in the pavement porous concretes and report their respective mechanical, durability and permeability functions. Waste material usage in the partial cement replacement will cause the concrete production cost to be reduced; also, the concretes' mechanical features have slightly affected to eliminate the disposal waste materials defects and to use cement in Portland cement (PC) production. While the cement has been replaced by different industrial wastes, the compressive strength, flexural strength, split tensile strength and different PC permeability mixes have depended on the waste materials' type applied in PC production.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.549-554
• /
• 2001

The authors have proposed that waste glass, which is crushed to pieces, can be used as a concrete aggregate. At the present time, recycled-glass concrete is used for sidewalk concrete blocks and pavement as glass is ornamental. However, in cases where recycled-glass concrete is used for structural concrete, strength and durability are required as structural concrete is exposed to the weather. Glass that is used generally is a mixture of SiO$_2$, Na$_2$O and CaO. SiO$_2$is the most likely cause of alkali-aggregate reaction when waste glass was used for concrete aggregate. In this study, an alkali-aggregate reaction test that is one of the important tests related to durability of aggregate was carried out far discussion of utilization of waste glass for concrete aggregate. From the results of the tests, it is found that glass is a reactive aggregate. The pessimum proportion of glass is about 75%. Then the cases of using fly ash, blast furnace slag and artificial zeolite for admixture materials were also examined for the purpose of prevention of alkali-aggregate reaction. from the results of the test, it was found that using them is an effective way to prevent alkali-aggregate reaction. The compressive strength in the cases of using admixture materials is larger than that without admixture materials.

• Computers and Concrete
• /
• 제10권2호
• /
• pp.95-104
• /
• 2012

This study uses recycled green building materials based on a Taiwan-made recycled mineral admixture (including fly ash, slag, glass sand and rubber powder) as replacements for fine aggregates in concrete and tests the properties of the resulting mixtures. Fine aggregate contents of 5% and 10% were replaced by waste LCD glass sand and waste tire rubber powder, respectively. According to ACI concrete-mixture design, the above materials were mixed into lightweight aggregate concrete at a constant water-to-binder ratio (W/B = 0.4). Hardening (mechanical), non-destructive and durability tests were then performed at curing ages of 7, 28, 56 and 91 days and the engineering properties were studied. The results of these experiments showed that, although they vary with the type of recycling green building material added, the slumps of these admixtures meet design requirements. Lightweight aggregate yields better hardened properties than normal-weight concrete, indicating that green building materials can be successfully applied in lightweight aggregate concrete, enabling an increase in the use of green building materials, the improved utilization of waste resources, and environmental protection. In addition to representing an important part of a "sustainable cycle of development", green building materials represent a beneficial reutilization of waste resources.

• 한국건설순환자원학회지
• /
• 제17권4호
• /
• pp.36-40
• /
• 2022

• 한국건설순환자원학회지
• /
• 제17권1호
• /
• pp.15-21
• /
• 2022

• 한국건설순환자원학회논문집
• /
• 제9권1호
• /
• pp.50-57
• /
• 2021

본 연구에서는 폐기물을 대량 활용한 저탄소 도로포장재 개발의 일환으로 폐유리 및 레드머드를 활용한 상온 아스팔트 혼합물의 물성 및 역학적 특성을 검토하고, 해당 표준에서 규정하고 있는 성능기준에 대한 충족여부를 검토하였다. 연구결과 폐유리 혼입 시 혼합물의 변형저항성을 저하시켜 GR의 품질기준치를 충족시키지 못하는 것으로 나타나 이에 대한 배합상 개선이 필요한 것으로 나타났다. 또한 레드머드 첨가로 폐유리 활용 혼합물의 성능을 크게 개선시키는 것으로 나타났으며, 폐유리 혼입에 따른 변형저항성 저하를 개선시켜 현재 GR에서 규정하고 있는 안정도, 흐름값, 간접인장강도 및 인장강도비 등에 대한 품질기준치를 모두 충족시키는 것으로 나타났다. 따라서 폐유리 및 레드머드의 순환 상온 아스팔트 혼합물용 적용 소재로의 가능성을 확인할 수 있었다.