• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.85-87
• /
• 2004

We fabricated flexible thermoradiotherapy probes to alternated combination with Interstitial hyperthermia and Brachyradiotherapy thermoradiotherapy probe was coated by gold plate on polyethylene brachytherapy probe. When Agar phantom was heated 15 minute with 30 W radiofrequency power, temperature increased as 5oC for polyethylene probe and 20oC for gold coated polyethylene probe. We observed that the 1 cm square array would heat a volume with a 1.25 cm radius circular field cross section to therapeutic temperatures (90% relative SAR using Tm) and the 2 cm square array with a 1.75 cm radius rectangular field with central inhomogeneity. With 2 cm long electrode implants, we observed that the 1 cm square array would heat a 3 cm long sagittal section to therapeutic temperature (90% relative SAR using Tm). The histopathological changes associated with RF heating of normal canine brains have been correlated with thermal distributions. RF needle electrode heating was applied for 50 min to generate tissue temperatures of 43${\circ}$C. We obtained a quarter of the heated tissue material immediately after heating and sacrificed at intervals from 7${\sim}$30 days. The acute stage was demonstrated by liquefactive necrosis, pyknosis of neuronal element in the gray matter. Mild gliosis occurring around the necrosis was demonstrated in the last sacrificed (days30)canine brain.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.351-364
• /
• 2002

Conventional 3D ultrasound imaging using mechanical ID arrays suffers from poor elevation resolution due to the limited depth-of-focus (DOF). On the other hand, 3D imaging systems using 2D phased arrays have a large number of active channels and hence require a very expensive and bulky beamforming hardware. To overcome these limitations, a new real-time volumetric imaging method using curved 2-D arrays is presented, in which a small subaperture, consisting of 256 elements, moves across the array surface to scan a volume of interest. For this purpose, a 2-D curved array is designed which consists of 90$\times$46 elements with 1.5λ inter-element spacing and has the same view angles along both the lateral and elevation directions as those of a commercial mechanical 1-D array. In the proposed method, transmit and receive subapertures are constructed by cutting the four corners of a rectangular aperture to obtain a required image qualify with a small number of active channels. In addition the receive subaperture size is increased by using a sparse array scheme that uses every other elements in both directions. To suppress the grating lobes elevated due to the increase in clement spacing, fold-over array scheme is adopted in transmit, which doubles the effective size of a transmit aperture in each direction. Computer simulation results show that the proposed method can provide almost the same and greatly improved resolutions in the lateral and elevation directions, respectively compared with the conventional 3D imaging with a mechanical 1-D array.

• Journal of Animal Environmental Science
• /
• v.14 no.1
• /
• pp.61-68
• /
• 2008

The roof structural model of liquid manure storage tank was designed to improve a structural safety and an ability of resistance to corrosion by the bad environmental condition with high humidity and high gas concentration. Due to corrosion of a general steel, the 5 years used materials were reduced to one-third of a new material in the result of a bending strength test. Some structural materials were tested to evaluate a strength and an anti-corrosion, and stainless steel pipe (STS439), steel angle with zinc hot dipping, rectangular steel pipe covered with FRP (Fiberglass Reinforced Plastics) resin were selected finally. A stainless steel is more expansive about $3{\sim}5$ times than general structural steel. But its durability under heavy corrosive environment is expected twice as long as general steel. The roof models were designed as closed cone type for each of the three structural materials. In the result of a FEM (Finite Element Method) structural analysis for the developed models, the safe snow depth was higher 2.3 times than a general roof structure, when elements of equal section modulus were used.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.122-138
• /
• 2001

It is well known that whcn waves propagating on a shallow water suddenly encounter a much deeper water they do not propagate further but are reflected. If we apply this phenomenon to a harbor by making the harbor depth much greater than outside, we could improve the harbor tranquillity by making the waves impinging into the harbor be reflected at the harbor entrance. In the present paper, first we apply the numerical models based' on the mild-slope equation and extended mild-slope equation to calculate the long wave resonances in a rectangular harbor with a very large depth discontinuity at its entrance to find that the difference between the models is almost negligible. By applying the numerical model to a realistic model harbor whose inside is entirely dredged, it is found that the effect of dredging is insignificant when the inside depth is twice the outside one but tripled inside depth significantly reduces the long waves of period of one to five minutes whieh may exert a bad influence on ship motion. Moreover, even when only a portion of the harbor basin is dredged, the cffect of dredging in the dredged area is found to be comparable to that of entire dredging, showing that the dredging of harbor basin can be a countenncasure for harbor resonance.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.72-78
• /
• 2003

To observe the effect of excitation coil pitch on the micro fluxgate magnetic sensor, two sensors are fabricated using multi layer board process and the pitch distance of excitation coil are $260\;{\mu}m$ and $520\;{\mu}m$, respectively. The fluxgate sensor consists of five PCB stack layers including one layer of magnetic core and four layers of excitation and pick-up coils. The center layer as magnetic core is made of a Co-based amorphous magnetic ribbon with extremely high DC permeability of ${\sim}100,000$ and has a rectangular-ring shape to minimize the magnetic flux leakage. Four outer layers as excitation and pick-up coils have a planar solenoid structure and are made of copper foil. In case of the fluxgate sensor having the excitation coil pitch of $260\;{\mu}m$, excellent linear response over the range of $-100\;{\mu}T$ to $+100\;{\mu}T$ is obtained with sensitivity of 780 V/T at excitation sine wave of $3V_{p_p}$ and 360 kHz. The chip size of the fabricated sensing element is $7.3\;{\times}\;5.7\;mm^2$. The very low power consumption of ${\sim}8\;mW$ is measured. This magnetic sensor is very useful for various applications such as: portable navigation systems, telematics, VR game and so on.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.40-47
• /
• 2009

This paper proposes a method for vehicle license plate detection using mathematical morphology and symmetry. In general, the shape, color, size, and position of license plate are regulated by authorities for a better recognition by human. Among them, the relatively big intensity difference between the letter and the background region of the license plate and the symmetry about the plate are major discriminating factors for the detection. For the first, the opened image is subtracted from the closed image to intensify the region of plate using the rectangular structuring element which has the width of the distance between two characters. Second the subtraction image is average filtered with the mask size of the plate. Third, the column maximum graph of the average filtered image is acquired and the symmetry of the graph is measured at every position. Fourth, the peaks of the average filtered image are searched. Finally, the plate is assumed to be positioned around the one of local maxima nearest to the point of the highest symmetry. About 1,000 images taken by speed regulation camera are used for the experiment. The experimental result shows that the plate detection rate is about 93%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.950-957
• /
• 2012

In this paper, a small round-ended slot loaded by double ridges on the broad wall of a rectangular waveguide is presented as an element for a waveguide slot-array antenna(WSAA). By properly adjusting the ridge dimension, a resonance of the slot at a desired frequency can be achieved. The resonant length of the proposed slot is about $0.26{\lambda}_0$(free space wave length) at the resonance frequency. The proposed resonant slot has some advantageous properties, such as small size, small resonant conductance, and short and stable resonant slot length. In addition, the characteristics of the slots are slightly affected by the adjacent elements when the slots are arrayed for a waveguide slot antenna. A $4{\times}1$ WSAA with -20 dB side-lobe level(SLL) is designed, fabricated, and tested experimentally. The measured results are well agreed with the simulated ones and have an SLL of -15.9 dB and a half-power beam width of $110.2^{\circ}$ in the E-plane and $21.2^{\circ}$ in the H-plane, respectively, at 9.41 GHz.

• Radiation Oncology Journal
• /
• v.9 no.1
• /
• pp.27-35
• /
• 1991

An interstitial radiofrequency needle electrode system was constructed for interstitial heating of brain tissue. Radiofrequency electrodes with Thermotron RF 8 were tested in an agar phantom and in a normal canine brain to determine how variations in physical factors affected temperature distributions. Temperature distributions were checked after heating with 1 mm diameter needle electrode implants on the corners of 1 and 2 cm squares in a phantom and plot isotherms for various electrodes arrangement. We observed that the 1 cm square array would heat a volume with a 1.25 cm radius circular field cross section to therapeutic temperatures ($90\%$ relative SAR using Tm) and the 2 cm square array with a 1.75 cm radius rectangular field with central inhomogeneity. With 2 cm long electrode implants, we observed that the 1 cm square array would heat a 3 cm long sagittal section to therapeutic temperature ($90\%$ relative SAR using Tm). We found that radiofrequency electrodes could be selected to match the length of the heating area without affecting its performance. The histopathological changes associated with RF heating of normal canine brains have been correlated with thermal distributions. RF needle electrode heating was applied for 50min to generate tissue temperatures of $43^{\circ}C$. We obtained a quarter of the heated tissue material immediately after heating and sacrificed at intervals from $7\sim30$days. The acute stage (immediately after heating) was demonstrated by liquefactive necrosis, pyknosis of neuronal element in the gray matter and by some polymer-phonuclear leukocytes infiltration. The appearance of lipid-laden macrophages surrounding the area of liquefaction necrosis was demonstrated in all three sacrificed dogs. Mild gliosis occurring around the necrosis was demonstrated in the last sacrificed (Days 30) canine brain.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.90-90
• /
• 2014

The Immersion Grating Infrared Spectrometer (IGRINS) is the first astronomical spectrograph that uses a silicon immersion grating as its dispersive element. IGRINS fully covers the H and K band atmospheric transmission windows in a single exposure. It is a compact high-resolution cross-dispersion spectrometer whose resolving power R is 40,000. An individual volume phase holographic grating serves as a secondary dispersing element for each of the H and K spectrograph arms. On the 2.7m Harlan J. Smith telescope at the McDonald Observatory, the slit size is $1^{{\prime}{\prime}}{\times}15^{{\prime}{\prime}}$. IGRINS has a plate scale of 0.27" pixel-1 on a $2048{\times}2048$ pixel Teledyne Scientific & Imaging HAWAII-2RG detector with a SIDECAR ASIC cryogenic controller. The instrument includes four subsystems; a calibration unit, an input relay optics module, a slit-viewing camera, and nearly identical H and K spectrograph modules. The use of a silicon immersion grating and a compact white pupil design allows the spectrograph collimated beam size to be 25mm, which permits the entire cryogenic system to be contained in a moderately sized ($0.96m{\times}0.6m{\times}0.38m$) rectangular Dewar. The fabrication and assembly of the optical and mechanical components were completed in 2013. From January to July of this year, we completed the system optical alignment and carried out commissioning observations on three runs to improve the efficiency of the instrument software and hardware. We describe the major design characteristics of the instrument including the system requirements and the technical strategy to meet them. We also present the instrumental performance test results derived from the commissioning runs at the McDonald Observatory.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.14-23
• /
• 2014

The purpose of this study is to contribute in building credibility of the methodology of the appearance of the traditional colors and the interpretation of the meaning of those appearances by analyzing the spatial construction and configuration and the traditional colors that appear in spatial elements about the scenery component that appear in Seyeonjeong. We conducted a literature research about the traditional colors, the background of the creation of Seyeonjeong, and etc. For the contents for the empirical analysis, we took the scenery and space elements in the poems, such as Eobusasisa and O-u-ga, and the contents of poems related to ojeongsaek (five Korean traditional colors) based on the Yin-Yang and the Five Elements ideology Particularly, after dividing the spatial elements appearing in Seyoenjeong into visual, synesthetic, symbolic/cognitive spatial element, we further distinguished the visual space into positions and directions of the of the spaces and the scenery of the season; the synesthetic space into seasons, time and five senses; and the symbolic/cognitive space into chiljeong (or the seven passions) and sadan (or the four clues). Then we carried out the study by analyzing the correlation between the intention of the garden creation and the meaning of the spaces, through the analysis of ojeongsaek system for each spatial element. Firstly, spatial structure and format that appear in Seyeonjeong can be divided into two directional axes of southeast and northwest according to the flat form of the Seyeongjeong's rectangular palace, with Seyeongjoeng as the center. Secondly, in spatial component element, the frequencies of appearance of the traditional colors of Seyoenjeong are 33.2% for white, 20.8% for blue, 20.8% for black, 18.7% for red and 6.3% for yellow. Thirdly, based on the analysis of the traditional colors the most frequent appearance of 'white' left a room for interpretation like the creation of Seyeonjeong was to enjoy secular living without lingering political feelings so that the high mountains remain clear and clean. Also, the predominant frequency of appearance of blue, similar frequency of appearance of black and red, and the least frequent appearance of yellow is in agreement with or can be at least interpreted related to Yun Seon-do's intention for creating Seyeonjeong not for political rank or power but as a place to enjoy nature, through which he can build on his knowledge, and to lead rest of his life as a noble being through plays, like dancing and writing poems. Fourthly, these interpretations of the analysis of the frequency of appearance of the traditional colors of Seyeongjong shows the reliability, validity, and consistency of the methodology of the analysis of the frequency of appearance of the traditional colors and the interpretation of the meanings in the context that the color white appears most frequently in Soswewon as well and that the background life of the Soswewon's creator Yangsanbo can be interpreted in a similarly way. Above all, this study is significant from the fact that we proposed a theory about the method of analysis and interpretation of the traditional colors in a traditional landscape space. Moreover, there is a great significance of discovering that traditional colors appear in traditional spaces and this can be used as a methodological framework to interpret things like, intention for creation of (buildings/architectures).