• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.109-117
• /
• 2014

This paper presents a superresolution restoration technique that can restore high-resolution images from differently blurred low resolution images rather than using the motion information between low-resolution images. In order to restore the super-resolution image the rotatable aperture mask lens system is proposed. The proposed technique does not need to estimate point spread function at each frame. In addition, it does not require image registration because there is no global translational motion between low resolution images. By using a rotatable rectangular aperture, two consecutive captured images provide sufficiently exclusive information for superresolution. Therefore, the proposed method can reduce the registration error between the low-resolution image as well as the calculation amount for superresolution restoration. The existing lens system of the camera can be extended to obtain a superresolution image by only adding an rotatable rectangular aperture mask. Finally, in order to verify the performance of the proposed system, experimental results are performed. By comparing with the existing superresolution methods, the proposed method showed the significant improvements in the sense of spatial resolution.

• Laser Solutions
• /
• v.6 no.3
• /
• pp.19-28
• /
• 2003

The manufacturing process for the microfluidic device can include sequential steps such as master fabrication, electroforming, and injection molding. The laser ablation, using masks, has been applied to the fabrication of channels in microfluidic devices. In this research, an excimer laser was used to engrave microscopic channels on the surface of PET (polyethylene terephthalate), which shows a high absorption ratio for an excimer laser beam with a wavelength of 248 m. When 50-${\mu}{\textrm}{m}$-wide rectangular microscopic channels are ablated with a 500 ${\times}$ 500 ${\mu}{\textrm}{m}$ square mask at a magnification ratio of 1/10, ditch-shaped defects were found in both corners. The measurement of laser beam intensity showed that a coherent image in the PET target caused such defects. Analysis based on the Fourier diffraction theory enabled the prediction of the coherent shape at the image surface as well as the diffraction beam shape between the mask and the image surface. It also showed that the diameter of the aperture had a dominant effect. The application of aperture with a diameter of less than 3 mm helped to eliminate such defects in the ablated rectangular microscopic channels on PET without such ditch-shaped defects.