• 한국전기전자재료학회논문지
• /
• 제19권1호
• /
• pp.46-51
• /
• 2006

This paper reports on the effects of silicone oils, used as processing agents, on the recovery of hydrophobicity of silicone rubber. The recovery of hydrophobicity was evaluated by the measuring the contact angle, the surface electrical resistance and SEM. Here, we formed artificial contamination on the surface of samples, which scratched by sand papers and alumina powders. There was small recovery of hydrophobicity on the surface of SIR-A that silicone oil was not added. In both oil-added samples, SIR-B and SIR-C, recovery of hydrophobicity was achieved greatly. The surface of SIR-C showed that a lot of silicone oil was observed due to migration of oil, relatively in comparison with SIR-B. The tendency of recovery of hydrophobicity expressed by contact angle was in a good agreement with electrical property as determined by surface resistivity.

• 한국전기전자재료학회논문지
• /
• 제15권2호
• /
• pp.133-140
• /
• 2002

This paper aims to investigate the effect of silicone oils as processing agent affecting the loss and recovery of hydrophobicity. The recovery of hydrophobicity was evaluated by the measurement of the surface electrical resistivity and the contact angle on the SIR surface. Two kinds of silicone oils (1 and 2) having different molecular weight were selected under a consideration of hydrophobicity and processability. SIR specimens were exposed to corona discharges in air and the specimens were analyzed with contact angle and surface resistance measurements. It was observed that the contact angle and the surface resistivity of SIR increase gradually with testing time. The fast recovery of hydrophobicity of SIR, expressed by the increment of contact angle and surface resistivity, was showed in SIR2 containing silicone oil 2.

• 한국식품과학회지
• /
• 제25권1호
• /
• pp.28-32
• /
• 1993

들깨종자의 압착착유에 미치는 온도와 압력의 영향을 살펴보기 위해 생들깨와 볶은들깨의 기름의 추출율 및 압착케이크의 부피변형율을 각각의 온도, 압력 및 압착시간에서 관찰하였다. 본 실험을 위해 들깨종자의 수분함량은 2.5%로 조절하였고 온도는 30, 40, 50 및 $60^{\circ}C$가 사용되었고 압력은 10, 30, 50 및 70 MPa을 적용하였으며 압착시간은 5, 7, 9 및 11분을 적용하였다. 온도, 압력 그리고 압착시간이 증가할수록 기름의 추출율 및 압착케이크의 부피변형율은 증가를 하였다. 생들깨와 볶은들깨의 최대 추출율은 $60^{\circ}C$, 70 MPa, 11분에서 각각 85.59% 및 85.30%이었다. 추출된 기름의 점도는 지수함수적인 온도의존성을 보여주었으며, 점도가 낮을수록 즉, 온도가 높을수록 기름의 추출율은 증가하였다. 압착요인과 기름의 추출율 및 압착케이크의 부피변형율과의 상관관계 분석에서 압착요인의 효과는 압력, 온도, 온도${\times}$압력 그리고 압착시간 순으로 감소하였다. 온도(T), 압력(P) 그리고 압착시간(D)과 기름의 추출율(Y)과의 관계는 생들깨는 $Y=7.95+36.85P+1.12T^2-0.55TP-5.08P^2(r^2=0.97\;p<0.01)$였으며, 볶은들깨는 $Y=4.50T+39.23P+0.83T^2-1.71P-5.07P^2(r^2=0.99,\;p<0.01)$이었다.

• Applied Biological Chemistry
• /
• 제37권1호
• /
• pp.14-18
• /
• 1994

온도와 수분함량의 상호작용이 들깨종자의 압착착유에 미치는 영향을 살펴보기 위하여 생들깨와 볶은들깨의 기름 추출율(REO) 및 압착케이의 부피변형율(VSPC)을 온도와 수분함량을 변화시켜가며 측정하였다. 본 실험을 위해 들깨종자의 수분함량을 2.5, 4.5, 6.5 및 8.5% (w.b.), 압착온도를 30, 40, 50 및 $60^{\circ}C$, 압착시간을 11분 그리고 압착압력을 50 MPa로 각각 조절하였다. 생들깨 및 볶은들깨의 REO 및 VSPC는 온가 낮을 때에는 수분함량이 높을수록 크게 나타났으나, 온도가 높을 때에는 수분함량이 낮을수록 크게 나타났다. 그러나 수분함량 8.5%에서는 온도에 관계없이 작았다. 압착요인과 REO 및 VSPC과의 관계를 분산분석한 결과 온도와 수분함량의 영향은 높은 유의성을 보여주었다. 또한 온도보다는 온도와 수분함량사이의 상호작용효과가 더 큰것으로 나타났다. 온도와 수분함량 사이의 상호작용이 가장 크게 나타난 구간은 본 실험조건의 모든 온도에서 수부함량 $2.5{\sim}4.5%$이었다. 최대 REO는 생들깨의 경우 수분함량 2.5%와 $60^{\circ}C$의 온도에서 84.4%이었고, 볶은들깨는 수분함량 6.5%와 $30^{\circ}C$의 온도에서 84.3% 이었다.

• 한국식품영양과학회지
• /
• 제24권5호
• /
• pp.785-789
• /
• 1995

참기름의 회분식 압착 최적화와 압착요인들의 상호관계를 규명하기 위하여 생참깨와 볶은 참깨를 온도($30, 40, 50, 60^{\circ}C$), 압력(10, 30, 50, 70MPa), 압착 시간(5, 7, 9, 11min) 및 수분 함량(2.5, 4.5, 6.5, 8.5%) 별로 압착하였다. 추출율은 수분 함량 2.5~4.5%, 30~$50^{\circ}C$, 30~50MPa일 때 높았으며, 수분 함량을 4.5% 이상으로 증가시키면 급격히 감소하였다. 최적 조건은 생참깨가 온도 $40.1^{\circ}C$, 압력 54.4MPa, 압착 시간 21.7분, 수분 함량 1.3%이었으며, 볶음 참깨는 각각 $44.4^{\circ}C$, 37.8MPa, 14.4분, 2.52%이었다. 최적 조건에서의 추출율은 생참깨가 84.6%, 볶음 참깨가 81.7%이었다. 통계분석 결과 수분 함량이 기름의 추출율에 가장 큰 영향을 미쳤으며, 그 다음으로는 압력, 온도 순이었다. 상호작용 효과는 압력X수분 함량, 온도X수분 함량, 온도X압력의 영향이 컸다. 온도(T), 압력(P), 압착 시간(D) 및 수분 함량(M)과 기름 추출율(Y) 간에는 생참깨가 $Y=18.20$ $35.66P$＋$24.52M-4.45P^{2}-1.20TM-4.02PM-6.62M^{2},\;r^{2}=0.89$, 볶은 참깨가 $Y=117.93$＋$16.40P-58.61M-2.75P^{2}$＋$1.79TM-1.65PM$＋$7.16M^{2},\;r^{2}$$=0.91$의 관계를 보였다.

• Journal of Microbiology and Biotechnology
• /
• 제28권5호
• /
• pp.739-747
• /
• 2018

The low solubility and high-cost recovery of Propionibacterium acnes polyunsaturated fatty acid isomerase (PAI) are key problems in the bioproduction of high value-added conjugated linoleic acid (CLA). To improve the solubility of recombinant PAI, six chaperone proteins were coexpressed with PAI. Introduction of GroELS proteins dramatically improved the PAI solubility from 29% to 97%, with increased activity by 57.8%. Combined expression of DnaKJ-GrpE and GroELS proteins increased the activity by 11.9%. In contrast, coexpression of DnaKJ-GrpE proteins significantly reduced the activity by 57.4%. Plasmids pTf16 harboring the tig gene and pG-Tf2 containing the tig and groEL-groES genes had no visible impact on PAI expression. The lytic protein E was then introduced into the recombinant Escherichia coli to develop a cell autolysis system. A 35% activity of total intracellular PAI was released from the cytoplasm by suspending the lysed cells in distilled water. The PAI recovery was further improved to 81% by optimizing the release conditions. The lipase from Rhizopus oryzae was also expressed in E. coli, with an extracellular activity of 110.9 U/ml. By using the free PAI and lipase as catalysts, a joint system was established for producing CLA from sunflower oil. Under the optimized conditions, the maximum titer of t-10,c-12-CLA reached 9.4 g/l. This work provides an effective and low-cost strategy to improve the solubility and recovery of the recombinant intracellular PAI for further large-scale production of CLA.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1992년도 폐기물 매립지의 공학적 특성과 개량기술
• /
• pp.19-32
• /
• 1992

Objectives of this study are : 1) to utilize capillary theory and obtain pore-size distribution profiles from moisture-suction relationships using Laplace theory. 2) to investigate the behavior of Light Non-Aqueous Phase Liquids(LNAPLs) in the subsurface environment and to develop several predictive relationships which can be used to assess the effectiveness of various LNAPLs remediation technologies. The relationship to predict pore-size distribution function expressed in differencial equation is found by using capillary theory. Also, experiments are conducted to : the various LNAPLs subjected to vadose zone drainage, groundwater table drainage, waterflooding with surfactants. The experiments are performed with #2 heating oil, jet fuel. and kerosene. Several relationships have been derived describing the effect of various properties and process parameters on the LNAPL residual saturation.