• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.561-568
• /
• 1995

Two methods, precipitation and ultrafiltration, were applied in order to recover platinum group metals(PGM) by complexing them with water-soluble polyelectrolytes, e.g., polyethyleneimine [PEl], poly(2-vinylpyridine) [2-PVP], poly (4-vinylpyridine) [4-PVP], and poly (styrene sulfonic acid) [PSSA]. In the precipitation method, the PGM-polyelectrolyte complex that was formed by mixing first with polybase, e.g.,4-PVP at pH 1 was precipitated by further mixing with polyacid, e.g., PSSA. However, the recovery of PGM obtained by this method was not quantitative(less than 70%). The "sandwiching" binding between the metal anions and two polyelectrolytes was examined by X-ray photoelectron spectroscopy(XPS). The XPS studies indicated that the PGM atom was bound with the acdic and basic polyelectrolyte via its oxygen and nitrogen atom, respectively. The recovery of PGM using polyelectrolyte was further studied by ultrafiltration methods as follows : The PGM ions, eomplexed at pH 1 with polyelectrolyte, allowed the applicntion of membrane filtration by virtue of the great differences in molecular weights between PGM and other low molecular weight species. By applying this method, Pd and Pt (ca. $10^{-4}M$) were selectively separated almost quantitatively from coexisting metal ions, e.g., $Cu^{2+}$ and $Ni^{2+}$. The EPR spectra and viscosity measurements indicated that these polyelectrlytes were not bound to $Cu^{2+}$ and $Ni^{2+}$ ions at this pH, which provided the basis for selective separation of PGM(Pd, Pt and Rh) from these coexisting ions.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.482-488
• /
• 2001

Platinum group metals (pgm) are useful to many industries such as chemical, dental and medical, petroleum, refining, electrical and electronic, and automotive. Researchers at the South Dakota School of Mines and Technology and PGM Recovery Ltd. have developed jointly an environmentally sound and metallurgically efficient process for extracting these metals from secondary sources. Once these metals have been dissolved in the leach liquor, the individual metals mainly platinum, palladium, and rhodium, should be separated in order to recover the individual metals with high purity. During this investigation, solvent extraction has been chosen as the method used to achieve the separation and extraction of platinum, palladium, and rhodium from the leach liquor. There were three solutions used throughout this procedure: 1) Synthetic solution (200 ppm Pt 80 ppm Pd 20 ppm Rh; 300 ppm Pt, 180 ppm Pd 50 ppm Rh), and 2) Auto catalyst leach liquors (100 ppm Pt, 30 ppm Pd, 20 ppm Rh). The solvents investigated included Lix 84(2-hydroxy-5-nonylacetonphenone oxime in a mixture with 5-dodecylsalicyloxime), Lix 84-I, ACORGA CLX-50 (diester of pyridine 3,5 dicarboxylic acid), and di-hexyl sulfide. The extraction values achieved using ACORGA CLX-50, Lix 84, and Lix 84-I were respectively Pt (25%, 0% 0%), Pd (100%, 99.8%, 95.3%), and Rh (99.1%, 35.5%, 4.25%). The stripping processes for the Lix 84, and Lix 84-I were proven to be more involved than others. The solutions were required to be simultaneously heated and stirred. The percentages acquired through these processes yielded unsatisfactory results. The stripping procedure for the ACORGA CLX-50 was easier to execute, yet the percentage recovered from this process was also unsatisfactory. Overall the di-hexyl sulfide has proved to be the most successful organic for this procedure. The average percent extracted for palladium was excellent with 99.9% - 100% with very little Platinum and rhodium extracted. The ability of stripping palladium in ammonia solution was also found to be excellent.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.589-602
• /
• 2024

Thermoelectric generator (TEG) generally do not have high heat conversion efficiencies. The performance of a thermoelectric generator module depends on the shape of the legs as well as the properties of the material and the number of legs. In this study, the leg shapes of thermoelectric elements are modeled into various geometric structures such as cylinder and cube shaped to efficiently harvest waste heat, and the electrical characteristics are compared numerically. The temperature gradient and power generation according to the bridge shape are found to be highest at the existing Cube shape. As a result of comparing the power generation using the cooling effect, the Cone shape was the highest in natural convection and the Hourglass shape was highest in forced convection. Research results confirm that geometry can affect the efficiency of thermoelectric generators.

• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.63-76
• /
• 2007

Typical examples as unrecycled materials in Korea were Zinc from the electric arc furnace dust (EAF Dust), and Moiybdenium and Vanadium from the desulfurizing spent catalyst of petrochemical industries. In the otherwise, though recovery of valuable metals from the waste electronic scrap such as printed circuit boards (PCBs) and platinum group metals (PGM) from the waste automobile catalyst have been interesting issues, it is difficult to collect the exact informations or statistics on their material flow system. In this article, The current domestic research trends for unrecycled or less recycled materials have been reviewed, and material flow and recycling technologies on the desulfurizing spent catalyst were surveyed.

• Resources Recycling
• /
• v.17 no.5
• /
• pp.28-36
• /
• 2008

The effect of attrition scrubbing on the recovery of platinum group metals (PGMs) from automobile catalytic converters has been investigated. Catalytic converters were first crushed into particles less than 2 mm and attrition scrubbed in the range of 60 min, and then they were sieved with several screens. The catalyst layer, $\gamma$-alumina, was dislodged from the surface of the supporting matrix into fine particles less than $45{\mu}m$ by attrition scrubbing. The fraction of fine particles less than $45{\mu}m$ increased as the residence time for attrition scrubbing increased. The composition of the fine fraction obtained at a residence time of 40 min was $CeO_2$ 19.3%, $ZrO_2$ 1.9% and PGMs 419 ppm. In the fine fraction, the recovery of y-alumina increased proportionally to the residence time. Simultaneously, the recovery rates of $CeO_2$, $ZrO_2$ and PGMs increased to 82.9%, 78.7% and 78.9%, respectively. The production of the fine fraction less than $45{\mu}m$ and the recovery of $\gamma$-alumina increased when the solid concentration and initial feed size increased. Therefore, the attrition scrubbing as the comminution and separation process was concerned to be effective for the recovery of catalyst layer from ceramic supporting matrix by physical impact and shearing action between particles in the scrubbing vessel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.951-958
• /
• 2017

In an attack context, the adversary wants to retrieve the message from the intercepted noisy bit stream without any prior knowledge of the channel codes used. The process of finding out the code parameters such as code length, dimension, and generator, for this purpose, is called the blind recognition of channel codes or the reconstruction of channel codes. In this paper, we suggest an improved algorithm of the blind recovery of rate k/n convolutional encoders in a noisy environment. The suggested algorithm improves the existing algorithm by Marazin, et. al. by evaluating the threshold value through the estimation of the channel error probability of the BSC. By applying the soft decision method by Shaojing, et. al., we considerably enhance the success rate of the channel reconstruction.