• Computers and Concrete
• /
• 제18권3호
• /
• pp.319-336
• /
• 2016

In this study, both two- and three-dimensional (2D and 3D) finite-volume-based models were developed to analyze the heat transfer mechanisms through the porous structures of cellular concretes under steady-state heat transfer conditions and to investigate the differences between the 2D and 3D modeling results. The 2D and 3D reconstructed pore networks were generated from the microstructural information measured by 3D images captured by X-ray computerized tomography (X-CT). The computed effective thermal conductivities based on the 2D and 3D calculations performed on the reconstructed porous structures were found to be nearly identical to those evaluated from the 2D cross-sectional images and the 3D X-CT images, respectively. In addition, the 3D computed effective thermal conductivity was found to agree better with the measured values, in comparison with the 2D reconstruction and real cross-sectional images. Finally, the thermal conductivities computed for different reconstructed porous 3D structures of cellular concretes were compared with those obtained from 2D computations performed on 2D reconstructed structures. This comparison revealed the differences between 2D and 3D image-based modeling. A correlation was thus derived between the results of the 3D and 2D models.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제20권2호
• /
• pp.147-177
• /
• 2006

제 7차 수학과 교육과정에서는 '학습자 존중'의 정신을 기본적인 방향으로 설정하고, '수학적인 힘'을 기르는 것을 수학과의 우선적인 목표로 진술하고 있다. 이를 구현하기 위해서 교사들에게 제공되어지는 교사용 지도서가 학교 현장에 큰 도움을 주지 못하고 있는 실정이다. 따라서 본 연구에서는 제 7차 수학과 교육과정 4-나 단계 6, 7, 8 단원의 수학 교과서 및 교사용 지도서의 내용을 분석하고 문제점을 도출하여, 지도 방법과 활동 내용을 보다 더 상세하게 제시하고, 보조적인 학습 자료를 개발하여 교사용 지도서를 재구성하였다. 이를 학교 현장에 적용한 후 교사와 학생들의 반응을 분석하여 재구성한 교사용 지도서의 미흡한 점을 수정 보완하여, 보다 더 개선된 교사용 지도서를 제시하였다.

• The Journal of Korean Physical Therapy
• /
• 제29권3호
• /
• pp.109-114
• /
• 2017

Purpose: The ascending reticular activating system (ARAS) is responsible for regulation of consciousness. In this study, using diffusion tensor imaging (DTI), we attempted to reconstruct the thalamocortical projections between the intralaminar thalamic nuclei and the frontoparietal cortex in normal subjects. Methods: DTI data were acquired in 24 healthy subjects and eight kinds of thalamocortical projections were reconstructed: the seed region of interest (ROI) - the intralaminar thalamic nuclei and the eight target ROIs - the medial prefrontal cortex, dorsolateral prefrontal cortex, ventrolateral prefrontal cortex, orbitofrontal cortex, premotor cortex, primary motor cortex, primary somatosensory cortex, and posterior parietal cortex. Results: The eight thalamocortical projections were reconstructed in each hemisphere and the pathways were visualized: projections to the prefrontal cortex ascended through the anterior limb and genu of the internal capsule and anterior corona radiata. Projections to the premotor cortex passed through the genu and posterior limb of the internal capsule and middle corona radiata; in contrast, projections to the primary motor cortex, primary somatosensory cortex, and posterior parietal cortex ascended through the posterior limb of the internal capsule. No significant difference in fractional anisotropy, mean diffusivity, and fiber volume of all reconstructed thalamocortical projections was observed between the right and left hemispheres (p>0.05). Conclusion: We reconstructed the thalamocortical projections between the intralaminar thalamic nuclei and the frontoparietal cortex in normal subjects. We believe that our findings would be useful to clinicians involved in the care of patients with impaired consciousness and for researchers in studies of the ARAS.

• 건축역사연구
• /
• 제25권2호
• /
• pp.57-68
• /
• 2016

This study explored the Jeollajwasuyeong Dongheon in the Late Joseon dynasty and its findings are as follows. Buildings in Jeollajwasuyeong were completed since the mid-18th century. They formed areas based on functions and were largely classified into two areas. The buildings within Yeongseong included Gaeksa (guesthouse), Dongheon(government office), Hyangcheong(advisory organ), Jungyeong(military camp), Guncheong (county office), Gongbang(workroom), and Changgo(warehouse). There were also buildings for low-ranking government officials. The central part of Jeollajwasuyeong was the areas of Gaeksa and Dongheon. Gaeksa was iconic area where local governors served King and had 75 Jinnamgwan Guesthouses and 3 inner gates. Those were measured off by separate walls. The Dongheon area was located in the northeast of Gaeksa. There were three gates such as Wanyeongru, Gongsamun, and Jeongbyeonmun at the entry area, which were also divided by walls like Gaeksa. Unjuheon (Dongheon) was at the center of the area where Gyeolseungdang, Mugwonjae, Naea, Chaekbang, and Gongsu were built. Outside the area, Baekwadang(used as Bijangcheong), Jinhyulgo, and Byeonggo were composed of part of the Dongheon area. Most of the buildings in Dongheon seemed to be repaired since 1664. It was difficult to locate the area of previous Dongheon. In particular, Jinnamgwan was first built in 1599 and destroyed by fire in 1716. In 1718, the building was reconstructed and shared historic denominator with Unjuheon before 1858 and reconstructed Unjuheon in 1869. It was found that Unjuheon was reconstructed more than at least three times, which was the central building in Dongheon. The buildings including Gyeolseungdang, Mugwonjae, and Baekwadang in the area were not existed within Jeollajwasuyeong and were reconstructed more than once and maintained until the early 1900s.

• 한국광학회지
• /
• 제20권2호
• /
• pp.76-80
• /
• 2009

지문 인식은 입력된 지문 영상과 컴퓨터 단말기 혹은 호스트 컴퓨터에 보관중인 지문 영상을 상호 비교하여 일치 또는 불일치를 판단함으로써 이루어진다. 지문 인식 과정에 암호화 및 복호화 과정은 필수적이며 이 과정에서 컴퓨터 형성 홀로그램(CGH)을 사용하며 CGH로부터 재생된 지문 영상을 상호 비교하게 된다. 본 논문에서는 광학적 패턴 인식 시스템을 사용하여 지문 영상들의 CGH로부터 재생된 지문 영상들을 비교하는 방법과 이와는 달리 지문 영상들의 CGH를 직접 비교하는 방법을 상호 비교하여 두 가지 방법의 근본적인 지문 인식 능력의 차이점을 분석하였으며, 후자의 경우가 전자의 경우 보다 약 150배 정도 인식률이 높았다. 특히 CGH를 이용한 지문 인식의 경우 CGH의 형성 방식에 따른 특성 변화를 분석하였다.

• Archives of Plastic Surgery
• /
• 제40권3호
• /
• pp.209-213
• /
• 2013

Background A cartilage wedge block and covering flap are standard procedures for firm elevation of the ear in microtia correction. However, using costal cartilage for elevation of the reconstructed auricle can be insufficient, and the fixed cartilage wedge block may be absorbed or may slip out. Furthermore, elevating covering flaps is time-consuming and uses up fascia, a potential source of reconstruction material. Therefore, we propose an innovative method using autologous onlay rib bone graft for auricular elevation of microtia. Methods From February 1995 to August 2012, 77 patients received a first stage operation with a rib cartilage framework graft. In the second stage operation, a small full thickness of rib bone was harvested through the previous donor scar. The bihalved rib bone was inserted into the subperiosteal pocket beneath the cartilage framework. Results The follow-up time ranged from 1 month to 17 years, with a mean of 3 years. All of the patients sustained the elevation of their ears very well during the follow-up period. Donor site problems, except for hypertrophic scars, were not observed. Surgery-related complications, specifically skin necrosis, infection, or hematoma, occurred in 4 cases. Conclusions Onlay rib bone graft used to elevate the reconstructed auricle is a more anatomically appropriate material than cartilage, due to the bone-to-bone contact between the bone graft and the temporal bone. Postoperative minor correction of the elevation degree is straightforward and the skin graft survives better. Therefore, reconstructed auricle elevation using onlay rib bone graft is a useful and valuable method.

• Archives of Plastic Surgery
• /
• 제35권1호
• /
• pp.86-91
• /
• 2008

Purpose: The performance of rhinoplasty on the patient who has already undergone unsatisfactory results or complications after augmentation rhinoplasty is a challenging surgical problem. Because the dead space is remained after removal of the foreign body and the thickness of the skin is not even, the deformity would be more conspicuous if the nose is reconstructed again with hard implant only or autogenous cartilage. In these cases, the autogenous fascia can be used to get a good result. We present our clinical experience of secondary rhinoplasty using Scarpa's fascia of lower abdomen. Methods: Thirty-two patients underwent the procedure from March of 2002 to February of 2007. Nine patients were reconstructed with Scarpa's fascia only, eighteen patients were reconstructed with silicone implant and fascia, and five patients were reconstructed with cartilage and fascia for secondary rhinoplasty. Results: There were no major complications. Most of the patients were satisfied with the results. The deviation of the silicone implant and postoperative hypertrophic scar of the donor site were seen in one case each. Postoperative absorption of fascia were seen in two cases using Scarpa's fascia only. Conclusion: Secondary rhinoplasty using Scarpa's fascia is very useful method which offers a minimized donor site scar, low complication rate, shorter operation time and patient satisfaction and prevents the alopecia caused by the harvest of temporalis fascia.

• Reproductive and Developmental Biology
• /
• 제37권2호
• /
• pp.57-64
• /
• 2013

Developmental potential of cloned embryos is related closely to epigenetic modification of somatic cell genome. The present study was to investigate the effects of applying histone deacetylation inhibitor, trichostatin A (TSA) to activated porcine embryos on subsequent development of porcine parthenogenetic and nuclear transfer embryos. Electrically activated oocytes were treated with 5 nM TSA for different exposure times (0, 1, 2 and 4 hr) and then the activated embryos were cultured for 7 days. The reconstructed embryos were treated with different concentrations of 0, 5, 10 and 25 nM TSA for 1 hr. Also 5 nM TSA was tested with different exposure times of 0, 0.5, 1, 2 and 4 hr. And fetal fibroblast cells were treated with 50 nM TSA for 1, 2 or 4 hr and with 5 nM TSA for 1 hr. Cumulus-free oocytes were enucleated and reconstructed by TSA-treated donor cells and electrically fused and cultured for 6 days. In parthenogenetic activation experiments, 5 nM TSA treatment for 1 hr significantly improved the percentage of blastocyst developmental rates than the other groups. Total cell number of blastocysts in 1 hr group was significantly higher than other groups or control. Similarly, blastocyst developmental rates of porcine NT embryos following 5 nM TSA treatment for 1 hr were highest. And the reconstructed embryos from donor cells treated by 50 nM TSA for 1 hr improved the percentage of blastocyst developmental rates than the control group. In conclusion, TSA treatment could improve the subsequent blastocyst development of porcine parthenogenetic and nuclear transfer embryos.

• Clinics in Shoulder and Elbow
• /
• 제23권3호
• /
• pp.119-124
• /
• 2020

Background: This study was performed to compare glenoid version and inclination measured using two-dimensional (2D) images from computed tomography (CT) scans or three-dimensional (3D) reconstructed bone models. Methods: Thirty patients who had undergone conventional CT scans were included. Two orthopedic surgeons measured glenoid version and inclination three times on 2D images from CT scans (2D measurement), and two other orthopedic surgeons performed the same measurements using 3D reconstructed bone models (3D measurement). The 3D-reconstructed bone models were acquired and measured with Mimics and 3-Matics (Materialise). Results: Mean glenoid version and inclination in 2D measurements were -1.705° and 9.08°, respectively, while those in 3D measurements were 2.635° and 7.23°. The intra-observer reliability in 2D measurements was 0.605 and 0.698, respectively, while that in 3D measurements was 0.883 and 0.892. The inter-observer reliability in 2D measurements was 0.456 and 0.374, respectively, while that in 3D measurements was 0.853 and 0.845. Conclusions: The difference between 2D and 3D measurements is not due to differences in image data but to the use of different tools. However, more consistent results were obtained in 3D measurement. Therefore, 3D measurement can be a good alternative for measuring glenoid version and inclination.

• Imaging Science in Dentistry
• /
• 제31권1호
• /
• pp.1-7
• /
• 2001

Purpose : To evaluate the usefulness of the reconstructed 3-dimensional image on the personal computer in comparison with that of the CT workstation by quantitative comparison and analysis. Materials and Methods : The spiral CT data obtained from 27 persons were transferred from the CT workstation to a personal computer, and they were reconstructed as 3-dimensional image on the personal computer using V-works 2.0/sup TM/. One observer obtained the 14 measurements on the reconstructed 3-dimensional image on both the CT workstation and the personal computer. Paired Nest was used to evaluate the intraobserver difference and the mean value of the each measurement on the CT workstation and the personal computer. Pearson correlation analysis and % incongruence were also performed. Results: I-Gn, N-Gn, N-A, N-Ns, B-A, and G-Op did not show any statistically significant difference (p>0.05), B-O, B-N, Eu-Eu, Zy-Zy, Biw, D-D, Orbrd R, and L had statistically significant difference (p<0.05), but the mean values of the differences of all measurements were below 2 mm, except for D-D. The value of correlation coefficient y was greater than 0.95 at I-Gn, N-Gn, N-A, N-Ns, B-A, B-N, G-Op, Eu-Eu, Zy-Zy, and Biw, and it was 0.75 at B-O, 0.78 at D-D, and 0.82 at both Orbrd Rand L. The % incongruence was below 4% at I-Gn, N-Gn, N-A, N-Ns, B-A, B-N, G-Op, Eu-Eu, Zy-Zy, and Biw, and 7.18%, 10.78%, 4.97%, 5.89% at B-O, D-D, Orbrd Rand L respectively. Conclusion : It can be considered that the utilization of the personal computer has great usefulness in reconstruction of the 3-dimensional image when it comes to the economics, accessibility and convenience, except for thin bones and the landmarks which are difficult to be located.