• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.85-91
• /
• 2018

Computed tomography, which obtains section images from reconstruction process using projection images, has been applied to various fields. The spatial resolution of the reconstructed image depends on the device used in CT system, the object, and the reconstruction process. In this paper, we investigates the effect of the number of projection images and the pixel size of the detector on the spatial resolution of the reconstructed image under the parallel beam geometry. The reconstruction program was written in Visual C++, and the matrix size of the reconstructed image was $512{\times}512$. The numerical bar phantom was constructed and the Min-Max method was introduced to evaluate the spatial resolution on the reconstructed image. When the number of projections used in reconstruction process was small, artifact like streak appeared and Min-Max was also low. The Min-Max showed upper saturation when the number of projections is increased. If the pixel size of the detector is reduced to 50% of the pixel size of the reconstructed image, the reconstructed image was perfectly recovered as the original phantom and the Min-Max decreased as increasing the detector pixel size. This study will be useful in determining the detector and the accuracy of rotation stage needed to achieve the spatial resolution required in the CT system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.8
• /
• pp.1057-1061
• /
• 2001

In this study we explored the possibility of performing nuclear transfer in the domestic cat and assessed the ability of different culture media to support in vitro development of reconstructed cat embryos. Donor somatic cells were derived from cultured cumulus cells or explants of oviduct tissue, and recipient cytoplasts from in vitro matured oocytes. A higher percentage of cleavage (84.6% and 86.5%) and development to the morula stage (35.9% and 44.2%) was found when reconstructed embryos receiving cumulus or oviduct cells were cultured in MK1 medium, compared with those cultured in CR1aa (58.7% and 72.5%, 13.8% and 13.6%, respectively). There was no significant difference between MK1 and CR1aa media with respect to the proportion developing to the blastocyst stage (15.4% and 17.3% vs 6.8% and 8.6%, respectively, p>0.05). There was no significant effect (p>0.05) of donor cell type (cumulus and oviduct cells) on the rates of fusion (65.0% and 52.5%), cleavage (84.6% and 86.5%), development to the morula (35.9% and 44.2%), and blastocyst (15.4% and 17.3%) stages when reconstructed embryos were cultured in MK1 medium. Similar results were found for the reconstructed embryos cultured in CR1aa medium. These results show that culture medium has a significant impact on the early development of reconstructed cat embryos, whereas donor cell type does not have a significant effect.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.333-333
• /
• 2000

When the generalized singular perturbation method is used for model reduction, the state variables of the original system is reconstructed from the reduced order model. The state reduction error is defined, which shows how well the reconstructed state variables approximate the state variables of the original system equation.

• Archives of Plastic Surgery
• /
• v.32 no.1
• /
• pp.76-84
• /
• 2005

Immediate breast reconstruction in breast cancer patients is universalized and now with a wide variety of methods to choose from, we can select a breast reconstruction method according to the patient's condition. Among these methods, immediate breast reconstruction with TRAM free flap is the most commonly used. Nipple reconstruction is usually performed as a secondary procedure, reconstructed. Nipple is reconstructed with contralateral nipple composite graft or with local flap. Areola is reconstructed with skin graft and tattooing. Therefore, to reconstruct complete breast, two or more staged operations are needed and are troublesome to both the surgeon and the patient. If we could reconstruct breast mound and nipple at same time, we would reduce the operative stages and heighten the patient's satisfaction. The author performed delayed or immediate breast reconstruction with TRAM free flap and nipple reconstruction at the same time. If the TRAM flap was to situate in the whole of the breast or at the center of the breast mound, nipple was reconstructed with a local flap from the TRAM flap. If the TRAM flap was not situated in center of breast mound, nipple was reconstructed with a local flap from remnant breast skin. Immediate nipple reconstructions in breast reconstruction consisted total of 22 cases. Among these, delayed breast reconstruction were 5 cases and immediate breast reconstruction were 17 cases. According to patient's condition and mastectomy method, nipple reconstruction method was selected; nipple reconstruction with contralateral nipple composite graft(3 cases); nipple reconstruction with remnant breast skin(6 cases); nipple reconstruction from flap margin(10 cases); nipple reconstruction with prefabricated nipple on flap(3 cases). Malposition of the reconstructed nipple was the most common and serious complication(6 cases). The other complications were atrophy of the nipple(1 case), and necrosis(1 case). Reconstruction of the breast and nipple at the same time can reduce the need of a secondary operation and use remnant skin or redundant flap tissue maximally. On the other hand, it must be considered that position and shape of nipple could be deformed, because the nipple reconstruction is performed before the shape of reconstructed breast settles completely. Prudent attention is needed, because the danger of complication is higher than delayed nipple reconstruction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.4
• /
• pp.493-499
• /
• 2004

Variations of temperature and velocity fields in a Hele-Shaw convection cell (HSC) were investigated using a holographic interferometry and 2-D PIV system with varying Rayleigh number. To measure quasi-steady variation of temperature field, two different measurement methods of holographic interferometry, double-exposure method and real-time method, were employed. In the double-exposure method, unwanted waves were eliminated effectively using a digital image processing technique. The reconstructed images are clear, but transient flow cannot be reconstructed clearly. On the other hand, transient convective flow can be reconstructed well using the real-time method. However, the fringe patterns reconstructed by the real-time method contain more noises, compared with the double-exposure method. Experimental results show a steady flow pattern at low Rayleigh numbers and a time-dependent periodic flow structure at high Rayleigh numbers. The periodic flow pattern at high Rayleigh numbers obtained by the real-time holographic interferometer method is in a good agreement with the PIV results.

• Journal of radiological science and technology
• /
• v.14 no.1
• /
• pp.61-72
• /
• 1991

In this paper, the rotating plate method extracting signal and reconstructing original image was proposed. The rotating methode has cell detector array each of which has used in the medical diagnosis X-ray photography. The major problem using the simple horizontal moving or non-moving methode is the size and number of detector cells which have the considerable affection on the sharpness and resolution of the reconstructed image. Secondary, the estimated pixel values of non-detected real points which are placed between detector cells will be the distorted pixels in the reconstructed image. Therefore, the proposed rotating plate method has the exact distribution on the uncertain pixels which were reconstructed by conventional methods to solve there problems. And then, the image using the rotated plate's cell out put signal was reconstructed on the computer simulation. The method will rotated the detector array plate to solve the reconstruction from the detector size and number of conventional methods. The result of simulation has estimated the original pixel position and 81 pixel/mm resolution which the reconsiderlation of the detector's moving orientation, the proposed method has 25 pixel/mm resolution. These results have been represented by 3-D computer graphics.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.436-438
• /
• 2002

As the use of virtual simulation expands, digitally reconstructed radiographs (DRRs), which mimic conventional simulation films, play an increasingly important role as reference images in the verification of treatment fields. The purpose of our study is to develop an algorithm for computation of digitally reconstructed radiographs based on Monte Carlo simulation that take into account almost all possible physical processes by which photons interact with matter. The Monte Carlo simulation based DRRs have the following features. 1) Account has been taken of almost all possible physical processes of interaction of photons with matter, including a detector (film) response. In principle, this is equivalent to X-ray radiography. 2) Arbitrary photon energies (from diagnostic to therapeutic) can be used to produce DRRs. One can even use electrons as the source. 3) It is easy to produce a double exposure, which mimics the double exposure portal image and may have superior visual appeal for treatment field verification, with weighting within the treatment field.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.82-85
• /
• 2009

Purpose: The purpose of this study was to evaluate the effect of extended CT field of view (FOV) on PET/CT of Standardized uptake value (SUV) when imaging extends beyond the CT FOV. Materials and Methods: CT images were reconstructed at different FOV sizes (500 and 700 mm). Two sets of CT images were reconstructed from the CT projection data by using two FOV sizes. Twenty patients were used in this study. PET images were reconstructed using attenuation maps with 500 mm CT FOV and 700 mm extended CT FOV images. Region of interests (ROIs) drawn on the PET images. In addition, twenty patients' PET images reconstructed by 500 mm CT FOV and 700 mm extended CT FOV were compared with $SUV_{max}$. Results: When using attenuation maps with 700 mm extended CT FOV, the $SUV_{max}$ analysis of liver (p=0.000), lung (p=0.007), mediastinum (p=0.001) were statistically significant. Conclusions: 700 mm extended CT FOV helps to recover the true activity distribution in the PET emission data. In addition, 700 mm extended CT FOV has affected SUV measurement of liver, lung, mediastinum.

• The Journal of Korea Robotics Society
• /
• v.3 no.1
• /
• pp.58-67
• /
• 2008

This study developed a novel augmented reality interface for minimally invasive surgery. The augmented reality technique can alleviate the sensory feedback problem inherent to laparoscopic surgery. An augmented reality system merges real laparoscope image and reconstructed 3D patient model based on diagnostic medical image such as CT, MRI data. By using reconstructed 3D patient model, AR interface could express structure of patient body that is invisible outside visual field of laparoscope. Therefore, an augmented reality system improved sight information of limited laparoscope. In our augmented reality system, the laparoscopic view is located at the center of a wide-angle concave screen and reconstructed 3D patient model is displayed outside the laparoscope. By using a joystick, the laparoscopic view and the reconstructed 3D patient model view are changed concurrently. With our augmented reality system, the surgeon can see the peritoneal cavity from a wide angle of view, without having to move the laparoscope. Since the concave screen serves immersive environments, the surgeon can feel as if she is in the patient body. For these reasons, a surgeon can recognize easily depth information about inner parts of patient and position information of surgical instruments without laparoscope motion. It is possible for surgeon to manipulate surgical instruments more exact and fast. Therefore immersive augmented reality interface for minimally invasive surgery will reduce bodily, environmental load of a surgeon and increase efficiency of MIS.

• Korean Journal of Head & Neck Oncology
• /
• v.4 no.1
• /
• pp.21-28
• /
• 1988

Skin replacement in large cheek defects after excision of benign or malignant tumor on the face is a challenging task. The physical characteristics of cheek skin are matched best by adjacent skin. Various methods of reconstructing of the facial surface such as forehead flap, distant flap, or a full thickness or split thickness skin graft have replaced adjacent tissue for coverage in many cases. We have reviewed ten cases of aesthetic reconstruction of the face after resection of the facial skin tumor within the last 5 years. The first group of 3 patients were reconstructed with split thickness skin graft from the scalp or lower abdomen. The second group of patients were reconstructed with cheek flap. The third group of 3 patients were reconstructed with cervicofacial flap. The last 2 patients were reconstructed with nasolabial flap & island falp respectively. The advantages from our experience with various method of coverage are its hidden donor area & good color match with the facial skin & increased success rate.