• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.61-64
• /
• 2003

In HTS transformer with double pancake windings, the perpendicular component of leakage magnetic flux density ($B_{r}$ ) applied to HTS tapes of double pancake windings of HTS transformer acts as a cause to decrease the critical current in HTS tape. So, in this paper, HTS transformer with reciprocal arrangement winding is designed. And in order to investigate the$ B_{r}$ applied to HTS windings, the 2-D non-linear electromagnetic analysis of HTS transformer is performed by using the OPERA 2D. The maximum $B_{r}$ applied to winding of HTS transformer is 0.112 T and the characteristics of HTS transformer were also obtained. But in this type of winding arrangement, reciprocal arrangement, the generated ac-loss to the HTS windings is very high because of the applied $B_{r}$ to HTS windings. Therefore, in order to reduce the generated ac-loss to the HTS windings, the new design of HTS transformer with concentric winding arrangement is presented in this paper and the 2-D non-linear electromagnetic analysis and the ac-loss for HTS transformer with the concentric winding arrangement is also carried out.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.75-75
• /
• 2003

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.66-70
• /
• 2003

In a HTS transformer, the perpendicular component of magnetic flux density ($B_r$) applied to HTS tapes of pancake windings becomes larger than that of solenoid winding, thereby decreasing the critical current in the HTS tapes. This paper introduces several methods to reduce $B_r$ applied to the HTS tapes in the transformer with double pancake windings by changing winding arrangements and the relative permeability of flux diverters. We have conducted a winding design for a single-phase 1MVA 22.9kV/6.6kV HTS transformer. We observed a change of $B_r$ due to a variation of gap-length between the high voltage windings and the low voltage windings, reciprocal arrangement and an increase of the number of the high voltage pancake. We also observed a change of Br on the HTS tapes due to variation of the relative permeability of flux diverters placed between the high voltage winding and the low voltage winding. Finally, we have designed a 1MVA 22.9kV/6.6kV HTS transformer winding using suggested methods and calculated transformer parameters by the 3D finite element method.

• 한국인터넷방송통신학회논문지
• /
• 제15권1호
• /
• pp.253-259
• /
• 2015

우리는 이 논문에서 교류전압원의 극성에 따라서 쌍방향으로 동작하는 반도체 변압기설계를 제시한다. 변압기는 회로 사이의 유도성 결합에 의하여 에너지를 전달하는 장치이다. 대부분의 변압기는 교류 전압에 의하여 1차 및 2차 코일로 구성된 장치이다. 우리가 제시하는 시스템은 전압신호 레벨을 두 방향으로 즉, 전원에서 부하까지 전압신호가 전달되기도 하고, 부하에서 전압원까지 전달되기도 한다. 전환하는 하나의 회로로 설계되어있다. 구성한 반도체 스위치는 NPN 트랜지스터가 교류 전압원 단자에 연결되어 있고, 에너지 저장 요소로서는 이미터 단자에 연결되어 있는 인덕터를 채택하였다. 제어 신호는 반도체의 베이스 단자에 인가된다. 제시하는 시스템은 전압신호의 진폭을 가역 방향으로 변화시킬 수 있다.