• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.184-185
• /
• 2002

We discussed the main issues of 10GHz Receiver packaging. High frequency structure simulations and circuit simulations for TO-CANs led to a new design for 10GHz optical receiver module packaging. The simulation results were compared to the measured laboratory data. The proposed package has low cost and easy manufacture process far mass production. Using this package, we had a good optical to electrical conversion (OE) characteristic at a data rate of 10Gbps.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.894-897
• /
• 2003

Recently, the rapid growth of mobile radio system has led to an increasing demand of low-cost high performance communication IC's. In this paper, we have designed RF front end for wireless LAN receiver employ zero-IF architecture. A low-noise amplifier (LNA) and double-balanced mixer is included in a front end. The zero-IF architecture is easy to integrate and good for low power consumption, so that is coincided to requirement of wireless LAN. But the zero-IF architecture has a serious problem of large offset. Image-reject mixer is a good structure to solve offset problem. Using offset compensation circuit is good structure, too. The front end is implemented in 0.25 ${\mu}m$ CMOS technology. The front end has a noise figure of 5.6 dB, a power consumption of 16 mW and total gain of 22 dB.

• Journal of electromagnetic engineering and science
• /
• v.6 no.1
• /
• pp.10-17
• /
• 2006

For the sake of the potential ability of overcoming interference in TD-SCDMA(time division-synchronous code division multiple access) systems, pilot signal is adopted, but the presented TD-SCDMA protocol has not considered the Rake technique for their mobile terminals. This paper developed a RAKE receiver algorithm and an implementation circuit, which make use of the pilot signal in the burst structure of the TD-SCDMA base station to estimate main channel parameter(channel delays) in the downlink of TD-SCDMA wireless network. The algorithm can reduce multipath interference for the mobile units in multiusers' case. Theoretic performance analysis presented in the paper and computer simulations show that there is a range of BER for Rake receiver and confirm that the proposed RAKE receiver algorithm achieved a better performance under multipath fading propagation and multiusers conditions.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.7
• /
• pp.71-78
• /
• 2019

This paper describes a design for a RF receiver to receive satellite digital audio service. The RF receiver designed in this study is a planar structure that is easy to install on the rooftop of a car and is compact in size. In addition, it can be applied to certain commercial models because it has low noise and high gain characteristics. The impedance bandwidth of antenna is 17.8%(415MHz), and the axial ratio is below 3dB as good properties for the bandwidth of 40MHz which is a satellite digital audio service band. Also, it had a broad radiation beamwidth of $95.41^{\circ}$ in H-plane and $117.45^{\circ}$ in E-plane. From the results of the field test of satellite digital audio service reception for the RF receiver, it demonstrated good C/N rate(10.2dB).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.472-486
• /
• 2000

This paper analysis the performance of joint receiving structure consisting of the decorrelating multiuser detection and beamfromenr-RAKE receive for DS-CDMA communication systems. In asynchronous transmission as the number of simultaneous users increase. the capacity of CDMA system becomes severly reduced due to the nonideal orthogonality between user-assigned PN sequences and improper power control. Accordingly, the CDMA receiving system becomes vulnerable to the multiple access interferences and the near-far problem under multipath fading channel environment. To withstand these undesired performance degradations, this paper proposes the new type of multiuser detection which has a form of the hybrid structure of concatenating beamformer-RAKE receiver and decorrelating multiuser detection. the beam former-RAKE receiver performs temporal and spatial diversity combining with alleviating fading effect and suppressing undesired interferences, and the multiuser detection plays a role of making the receiver robust to the near-far problem. Regarding the individual merit on the usage of either multiuser detection or beamformer-RAKE receiver, the hybrid one is expected to produce the enhanced performance in multipath fading CDMA channel. However major drawback of using decorrelating multiuser detection for practical deployment is arised from its computational complexity , which is exponentially increased as more number of users and transmitted symbols involve. To diminish the computational complexity, this paper exploits an efficient block Toeplitz inversion technique using matrix Levinson polynomial will be introduced. And this paper provided the mathematical analysis to show the efficiency of the proposed joint structure under the multipath propagation environment. And results of a series of exhaustive computer simulations are presented in order to demonstrate the overall performance of the proposed hybrid structure in multipath fading CDMA channel.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.2275-2293
• /
• 2020

This paper focuses on the simplified receiver design for multi-user circular block oversampled filter bank (CB-OSFB) uplink systems. Through application of discrete Fourier transform (DFT), the special banded structure and circular properties of the modulation matrix in the frequency domain of each user are derived. By exploiting the newly derived properties, a simplified zero-forcing (ZF) receiver is proposed for multi-user CB-OSFB uplink systems in the multipath channels. In the proposed receiver, the matrix inversion operation of the large dimension multi-user equivalent channel matrix is transformed into DFTs and smaller size matrix inversion operations. Simulation is given to show that the proposed ZF receiver can dramatically reduce the computational complexity while with almost the same symbol error rate as that of the traditional ZF receiver.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.11
• /
• pp.5394-5409
• /
• 2019

The paper investigates a novel detector receiver with Kalman channel information estimator and iterative channel response equalization for MIMO (multi-input multi-output) OFDM (orthogonal frequency division multiplexing) communication systems in fast multipath fading environments. The performances of the existing linear equalizers (LE) are not good enough over most fast fading multipath channels. The existing adaptive equalizer with decision feedback structure (ADFE) can improve the performance of LE. But error-propagation effect seriously degrades the system performance of the ADFE, especially when operated in fast multipath fading environments. By considering the Kalman channel impulse response estimation for the fast fading multipath channels based on CE-BEM (complex exponential basis expansion) model, the paper proposes the iterative receiver with soft decision feedback equalization (SDFE) structure in the fast multipath fading environments. The proposed SDFE detector receiver combats the error-propagation effect for fast multipath fading channels and outperform the existing LE and ADFE. We demonstrate several simulations to confirm the ability of the proposed iterative receiver over the existing receivers.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.26-31
• /
• 2009

In this paper, we propose the receiver algorithms suitable for the ECMA standard proposed for multi-gigabit packet transmission in 60 GHz band. In the ECMA standard, various modulation schemes are used for system flexibility. Hence, it is crucial to develop receiver algorithms supporting various modulation schemes with an uniform hardware structure. In this paper, we propose the receiver algorithms supporting DBPSK, DQPSK and OOK modulation schemes simultaneously. The proposed algorithms are not only hardware efficient but also support various modulation schemes with an uniform hardware structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1812-1823
• /
• 1994

In this paper, we focus on the simulation of receiver algorithms for the Q-CDMA reverse link modem to analyze its structure and performance. Receiver algorithm is to be characterized by processing a large amount of data for reliable data transmission through poor mobile channel environment. According to Q-CDMA receiver scheme, we connect the code acqusition and code tracking models for despreading of input signals and the RAKE structure demodulator used to resolve the time diversity signal due to multipath propagation. And this connected system is under test. The bit error rates are found for an arbitrary user under the AWGN and multipath fading environments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.13-16
• /
• 2004

The reliability of 1.550m-wavelength InGaAs mesa waveguide photodiodes(WGPDs), which developed for 40-Gbps optical receiver applications, fabricated by metal organic chemical vapor deposition is investigated. Reliability is examined by both high-temperature storage tests and the accelerated life tests by monitoring dark current and breakdown voltage. The median device lifetime and the activation energy of the degradation mechanism are computed for WGPD test structures. From the accelerated life test results, the activation energy of the degradation mechanism and median lifetime of these devices in room temperature are extracted from the log-normal failure model by using average lifetime and the standard deviation of that lifetime in each test temperature. It is found that the WGPD structure yields devices with the median lifetime of much longer than $10^6$ h at practical use conditions. Consequently, this WGPD structure has sufficient characteristics for practical 40-Gbps optical receiver modules.