• 가정과삶의질연구
• /
• 제19권5호
• /
• pp.203-220
• /
• 2001

The purpose of this study is to investigate how the marital conflict and the conflict-coping method of self and spouse have an effect on the marital satisfaction in the early stage of marital life. The subjects of this study are the 132 couples in the area of Taegu and Pohang city. The instruments of measurement are marital conflict scale, conflict-coping method scale and Kansas marital satisfaction scale(KMSS). The data are analysed through factor analysis, Cronbach's ${\alpha}$, frequency, percentile, mean, standard deviation, paired t-test and stepwise regression analysis. The major findings of this study are as follows: Firstly, as a result of figuring out couples' marital conflict, husbands and wives are having the highest conflict in the personality factor. The difference of marital conflict between husbands and wives is shown significant in the relative factor. Secondly, as a result of figuring out couples' conflict-coping method, husbands and wives use mostly the reasonable behavior and leastly physical aggression. The difference of conflict-coping method between husbands and wives is shown significant in the verbal aggression, adjustment renunciation and physical aggression. Thirdly, as a result of figuring out how the marital conflict and the conflict-coping method of self and spouse have an effect on the marital satisfaction, the communication factor of the conflict factors, the wives' verbal aggression perceived by husbands, and the reasonable behavior of the self have much effect on the marital satisfaction in case of husbands. And the personality factor, sexual factor and role factor of the conflict factors and the husbands' verbal aggression and reasonable behavior perceived by wives have much effect on the marital satisfaction in case of wives.

• 전자공학회논문지S
• /
• 제34S권5호
• /
• pp.35-44
• /
• 1997

In this paper, a an algorithm that detects the endocardial boundary, expanding the region from endocardial cavity using fuzzy inference, is proposed. This algorithm decides the ventricular cavity by fuzzy inference in process of searching each pixel from the inside of left ventricle in echocardial image and expands it. Uncertainty and fuzziness exists in decision of endocardial boundary. Therefore, we convert the lingustic representation of mean, standard deviation, and threshold value that are characteristic variables of endocardial boundary to fuzzy input and output variables. And, we extract proposed method is robuster to noise than radial searching method that is highly dependent on center position. To prove the similarity of detected boundary by fuzzy nference, we used the measures of SIZE, correlation coefficient, MSD, and RMSE and had acquired reasonable results.

• 지역사회간호학회지
• /
• 제19권3호
• /
• pp.450-458
• /
• 2008

Purpose: This study was done to investigate the relationship between the type of gender role identity and home environmental variables. Method: This study used a descriptive survey design and convenience sampling. Data were collected through self report questionnaires from 1,497 female high school students in Seoul. The data were analyzed by the SPSS 10.0 program, which included frequency, percentage, mean, standard deviation, chi square test, ANOVA, and Duncan test. Results: The androgyny gender role identity was most common (33.9%). The type of gender role identity had a significant correlation with home environmental variables (economic status, relationship with parents, father's education level, mother's education level. noninterference, reasonable guidance, affection, overprotection, achievement, active involvement, limit setting). Conclusion: It is necessary to provide parent education programs to help female adolescents develop gender role identity toward androgyny.

• 품질경영학회지
• /
• 제20권1호
• /
• pp.80-90
• /
• 1992

In industries, the capability indices $C_p$ and $C_{pk}$ can be used to provide measures of process potential capability and performance, respectively. The new approach advocated by Taguchi in quality control overcomes some problems in other approaches preventive management activities. Taguchi introduces the emphasis on loss function to improve quality of products on the side of customer. The proceeding concept of capability indices is not rational for the measurement of quality if the process mean is not equal to target value. The Taguchi approach is said to be more reasonable than the others in quality evaluation because of his loss function. However, the capability indices $C_{pm}{^+}$ and $C_{pn}$ using Taguchi's loss function only consider, acceptance cost for deviation from target value within specification limits. In other words, they do not include rejection cost for nonconformings that are failed to fall on the specification limits.

• Journal of Photoscience
• /
• 제12권2호
• /
• pp.57-61
• /
• 2005

The ground and excited state dipole moments of Coumarin 450 (C 450) laser dye were measured at room temperature in several solvents of varying dipole moments. The ground state dipole moment (${\mu}_g$) is estimated by using the modified Onsagar model and the excited state dipole moments (${\mu}_e$) were estimated by the method of solvatochromism as well as by utilizing the microscopic solvent polarity parameter ($E^N_T$). Further, the deviation of some of the points from the linearity of the $E^N_T$ versus Stokes shift indicates the existence of specific type of solute-solvent interaction. The excited state dipole moment of C 450 were found to be higher than those of the ground state and is interpreted in terms of the resonance structure of the molecule. A reasonable agreement has been observed between the values obtained by the method of solvatochromism and modified Onsagar model. It is observed that, corresponding to cyclohexane solution, the fluorescence maxima shift towards the red region with increasing the polarity of the solvents, hence the transition involved are of ${\pi}-{\pi}^*$ type.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.161-166
• /
• 2001

The prototype of a tactile sensor with $4\times 4$ taxels using PVDF was fabricated. The electrode patterns of the thin Cu tape are attached to the 28${\mu}{\textrm}{m}$ thickness PVDF using conductive adhesive and covering the sensor using polyester film for insulation. The structure of the sensor is flexible and the fabrication procedure is easy relatively. Also the output characteristics of the sensor was nearly linear with 8% deviation. The signals of a contact pressure to the tactile sensor are sensed and processed through A/D converter, DSP system and personal computer. The reasonable performance for the detection of contact shape and force distribution was verified through the experiment.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.383-386
• /
• 2009

Contract power conversion factor which is applied to estimate contract power of industrial customers is an important standard to calculate transformer capacity. This paper shows a reasonable contract power conversion factor, that was made by the systematic and statistical way considering actual conditions, such as investigated contract power and peak power for the last 5 years of each customer for industrial customers as to AMR system. In this dissertation, it is necessary to analyze the key features and general trend from the investigated data. It made an analysis of the feature parameters, such as average, standard deviation, median, maximum. minimum and thus it was carried the linear and nonlinear regression analysis. Therefore, this paper compared characteristics for a contract power conversion factor which is applied to calculate contract power with characteristics for a regression model for customers which maximum utilization factor of transformer is more than 60%.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.331-336
• /
• 2005

It is increased electrical energy consumption with the development of intelligence society in the office buildings and thus an energy conservation through efficient use of electricity became more important. This paper shows a reasonable design demand factor in office buildings, that was made by the systematic and statistical way considering actual conditions, such as investigated electric equipment capacity, peak power consumption, demand factor, etc., for 54 office buildings and 34 electrical design offices. In this dissertation, it is necessary to analyse the key features and general trend from the investigated data. It made an analysis of the feature parameters, such as average, standard deviation, median, maximum, minimun and thus it was carried linear and nonlinear regression analysis.

• 품질경영학회지
• /
• 제26권3호
• /
• pp.60-70
• /
• 1998

When driving the expected loss generated by the quality deviation, Taguchi(1991b) assumed that an objective characteristic has the uniform distribution in its control limit. But it is reasonable to assume that an objective characteristic has the normal distribution than the uniform distribution. Since the triangular distribution is similar to the normal distribution and easy to handle as well, in this article, we first find the optimum measurement interval and the optimum control limit under the triangular distribution. Under the normal assumption, the modified method is compared to Taguchi's. Secondly we find the numerical value solution of the optimum measurement interval and the optimum control limit under the normal distribution.

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.72-78
• /
• 2006

The paper proposes reference model error feedback control scheme for motion control system with hard non-linear components as like saturation and dead-zone in plant input part. Additionally, the plant has the system uncertainty effected by plant model parameter deviation and disturbance. The control algorithm uses the reference model to apply additional feedback loop with the error between reference model output and actual output effected by disturbance and non-linear components. And the stability evaluation based on Popov stability and controller design method are formulated to be performed. The effectiveness of the proposed scheme is examined by simulations. The results are proven by reasonable performances following reference model responses with good disturbance rejection performance without over-tuning of controller.