• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.449-455
• /
• 2013

When a missile is launched, a fracture-type canister cover should be properly broken by a collision with a missile or inner pressure of a canister. The fracture performance of a canister cover should be evaluated by a test using a real missile; however, it is unrealistic due to high cost and time restriction in a design stage. In this study, a test technique is newly developed to predict fracture performance of a canister cover. The test was design to have same kinetic energy with a real missile test when the cover is collide with a missile. The effectiveness of the suggested test technique was proved by comparing the test result with that of a real missile test.

• Smart Structures and Systems
• /
• 제25권2호
• /
• pp.155-167
• /
• 2020

This paper demonstrates a real-time hybrid substructuring (RTHS) shake table test to evaluate the seismic performance of a base isolated building. Since RTHS involves a feedback loop in the test implementation, the frequency dependent magnitude and inherent time delay of the actuator dynamics can introduce inaccuracy and instability. The paper presents a robust stability and performance analysis method for the RTHS test. The robust stability method involves casting the actuator dynamics as a multiplicative uncertainty and applying the small gain theorem to derive the sufficient conditions for robust stability and performance. The attractive feature of this robust stability and performance analysis method is that it accommodates linearized modeled or measured frequency response functions for both the physical substructure and actuator dynamics. Significant experimental research has been conducted on base isolators and dampers toward developing high fidelity numerical models. Shake table testing, where the building superstructure is tested while the isolation layer is numerically modeled, can allow for a range of isolation strategies to be examined for a single shake table experiment. Further, recent concerns in base isolation for long period, long duration earthquakes necessitate adding damping at the isolation layer, which can allow higher frequency energy to be transmitted into the superstructure and can result in damage to structural and nonstructural components that can be difficult to numerically model and accurately predict. As such, physical testing of the superstructure while numerically modeling the isolation layer may be desired. The RTHS approach has been previously proposed for base isolated buildings, however, to date it has not been conducted on a base isolated structure isolated at the ground level and where the isolation layer itself is numerically simulated. This configuration provides multiple challenges in the RTHS stability associated with higher physical substructure frequencies and a low numerical to physical mass ratio. This paper demonstrates a base isolated RTHS test and the robust stability and performance analysis necessary to ensure the stability and accuracy. The tests consist of a scaled idealized 4-story superstructure building model placed directly onto a shake table and the isolation layer simulated in MATLAB/Simulink using a dSpace real-time controller.

• 한국동물위생학회지
• /
• 제32권4호
• /
• pp.299-306
• /
• 2009

Assay for the detection and quantification of porcine circovirus type 2 (PCV 2) with the real-time PCR were developed. TaqMan probe real-time using a set of primer/probe was developed for detection of PCV 2. In this study we applied real-time PCR assay to 320 samples, collected from pig farms. In 151 of 320 samples, PCV 2 DNA was detected by conventional PCR assay. All samples positive for PCV 2 DNA in conventional PCR assay were also positive in Real-time PCR assay, but 69 of 169 samples that tested negative for PCV 2 DNA in conventional assay were tested positive in TaqMan probe real-time PCR assay. The test of TaqMan probe real-time PCR resulted in detection and quantification limits of 101 copies per sample. TaqMan probe real-time PCR assay increased the number of samples in which PCV 2 was detected by 21%. TaqMan probe real-time PCR assay is very efficient method in contrast to the conventinal PCR, becoming increasingly important method for gene analysis.

• Journal of the Korean Data and Information Science Society
• /
• 제17권1호
• /
• pp.115-122
• /
• 2006

A test is suggested for detecting deviations from both multivariate normality and independence. This test can be used for assessing the normality and independence of univariate time series residuals. We derive the limiting distribution of the test statistic and a simulation study is conducted to study the accuracy of the limiting distribution in finite samples. Finally, we apply our method to a real data of time series.

• 한국지진공학회논문집
• /
• 제24권2호
• /
• pp.67-76
• /
• 2020

This study aims to optimize the cochlea-inspired artificial filter bank (CAFB) using El-Centro seismic waveforms and test its performance through a shaking table test on a two-span bridge model. In the process of optimizing the CAFB, El-Centro seismic waveforms were used for the purpose of evaluating how they would affect the optimizing process. Next, the optimized CAFB was embedded in the developed wireless-based intelligent data acquisition (IDAQ) system to enable response measurement in real-time. For its performance evaluation to obtain a seismic response in real-time using the optimized CAFB, a two-span bridge (model structures) was installed in a large shaking table, and a seismic response experiment was carried out on it with El-Centro seismic waveforms. The CAFB optimized in this experiment was able to obtain the seismic response in real-time by compressing it using the embedded wireless-based IDAQ system while the obtained compressed signals were compared with the original signal (un-compressed signal). The results of the experiment showed that the compressed signals were superior to the raw signal in response performance, as well as in data compression effect. They also proved that the CAFB was able to compress response signals effectively in real-time even under seismic conditions. Therefore, this paper established that the CAFB optimized by being embedded in the wireless-based IDAQ system was an economical and efficient data compression sensing technology for measuring and monitoring the seismic response in real-time from structures based on the wireless sensor networks (WSNs).

• 한국항행학회논문지
• /
• 제19권5호
• /
• pp.411-416
• /
• 2015

IoT 환경은 다양한 형태의 센서들에 의하여 서비스 규모가 결정된다. 다양한 센서의 정보를 중계하기 위한 센서 게이트웨이는 대표적인 미들웨어 시스템이며, 데이터와 그래픽을 이용하여 정보를 도시하는 인포그래픽은 실시간 정보를 효율적으로 전시하기위한 클라이언트 시스템이다. 대량의 정보를 효율적으로 전시하기 위한 실시간 인포그래픽을 개발하기 위하여 IoT 환경과 유사한 테스트 베드가 필요하다. 기존의 네트워크 시스템 개발 시 사용되던 테스트 도구들은 주로 단위 기능 테스트 및 성능 위주의 테스트에 적합하도록 구성되어 있다. 본 논문에서는 실시간 인포그래픽 개발에 필요한 의미 있는 다양한 정보를 생성 할 수 있는 웹 기반의 시뮬레이션 프레임워크를 제안하고, 기존의 네트워크 성능 테스트 도구들과의 테스트 기능 비교를 통하여 제안하는 시스템의 기능을 평가한다.

• 방송공학회논문지
• /
• 제21권5호
• /
• pp.792-802
• /
• 2016

최근 사용이 늘어나고 있는 멀티밴드 사운드바 설계 시, 설계검증은 시뮬레이션으로 확인이 되지 않거나 되기 힘든 검증요소들이 다수 존재한다. 따라서 본 논문에서는 프로세서 내장 사운드바 SoC를 위한 FPGA 검증시스템을 구현하였다. 이를 통해 설계단계의 시뮬레이션으로 검증할 수 없는 실시간 성능테스트와 청취테스트를 실시간 검증하였다. 즉, 구현된 FPGA 검증시스템을 이용해서 SNR, THD+N, 주파수응답과 같은 정량적 항목들의 측정 및 청취테스트를 시행하였고, 테스트 결과가 설계목표를 만족함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1038-1040
• /
• 1997

This paper describes dynamic characteristics test of distance relay and current differential relay using Real Time Digital Simulator on double circuit transmission line. First, The double circuit T/L modeling on RTDS was proposed and the results from the proposed model were compared with those of PSS/E. This comparison shows the possibility of dynamic test using the RTDS. The relay included about 20 test items which are apt to include maloperation of protective relays in critical situations.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.107-114
• /
• 2021

High penetration of renewable energy generators causes unnecessary investment for power system facilities. Especially with Korean government policies such as Renewable Energy 3020 and Inter-connection support Responsibility of KEPCO for 1 MW DERs, the applications of DER interconnection in distribution system have been increasing. To save the investment, smart control functions for DERs are required and the test bed for the inverters which have not been prepared are necessary to insure DER inter-connection stability. For this, test bed for advanced functions of a smart inverter has been constructed and the tests for necessary functions have been implemented. In this paper, the test bed and environment as well as specifications are introduced and the test results for the validation of the functions are analyzed.

• 한국해양공학회지
• /
• 제23권4호
• /
• pp.78-84
• /
• 2009

This paper presents development results of integrated operating program and its simulator for an inshore test miner. The inshore test miner drives on the seabed and collects manganese nodules. For operating the test miner, integrated operating program (IOP) is needed for remote control and monitor of the miner in real-time. However, it is hard to develop the practical IOP for the test miner system, because the system is big, expensive, and unique. So a simulator was developed as a test substitute in order to save time and to reduce cost. Using test results of the simulator, the IOP of the test miner was developed. The developed IOP consists of remote program, host program, monitoring program and database program. The operating program was developed using PXI and Labview of NI. The experimental results are presented to show the applicability of the developed program.