• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.8
• /
• pp.2814-2832
• /
• 2014

As information society matures to an even higher level and as information technology becomes a necessity to our everyday lives, the needs to develop, support and satisfy personal and social needs without the limitation of time, space, and location have become a vital point to everyday lives. Smartphone users are increasing at a staggering rate but the research on mobile-Learning model and the implementation of m-Learning scenario are still behind the needs of the users. Therefore, this paper focuses on the design of 'repeatable and short-spanned m-Learning model' to meet the needs of the learners who are on the go and on the move with their smartphones. Smartphone users frequently reach out for their phones but compare to the frequencies, the actual span of time they spend per use are relatively and surprisingly short. One way to understand this phenomenon is that the users tend to immediately replace their smartphones with laptops or desktops whenever they are available. A leaning model was needed to reflect this short and frequent use, a use that is solely based on the smartphone environment. This proposed learning model first defines this particular setting and implements the model to real smartphone users over an 8 week period. To understand whether different learning backgrounds can influence this model, different schools with online and offline learning channels participated in the experiment. User survey was conducted after the experiment to get a better understanding of the smartphone users. Pretest and posttest were conducted before and after the experiment and the data were validated and analyzed using SPSS version 18.0 for PC. Preliminary descriptive statistics, multiple regression and cross validation was conducted for the analysis. The results showed that the proposed English Listening and Comprehension Mobile Digital Textbook (ELCMDT) had a positive effect on the learners in general and was more effective for learners who were already experienced with online learning.

• Journal of the HCI Society of Korea
• /
• v.9 no.1
• /
• pp.23-28
• /
• 2014

In this study we focus on the effect of the interaction between humans and reactive television when emotion recognition through facial expression mechanism is used. Most of today's user interfaces in electronic products are passive and are not properly fitted into users' needs. In terms of the user centered device, we propose that the emotion based reactive television is the most effective in interaction compared to other passive input products. We have developed and researched next generation cognitive TV models in user centered. In this paper we present a result of the experiment that had been taken with Fraunhofer IIS $SHORE^{TM}$ demo software version to measure emotion recognition. This new approach was based on the real time cognitive TV models and through this approach we studied the relationship between humans and cognitive TV. This study follows following steps: 1) Cognitive TV systems can be on automatic ON/OFF mode responding to motions of people 2) Cognitive TV can directly select channels as face changes (ex, Neutral Mode and Happy Mode, Sad Mode, Angry Mode) 3) Cognitive TV can detect emotion recognition from facial expression of people within the fixed time and then if Happy mode is detected the programs of TV would be shifted into funny or interesting shows and if Angry mode is detected it would be changed to moving or touching shows. In addition, we focus on improving the emotion recognition through facial expression. Furthermore, the improvement of cognition TV based on personal characteristics is needed for the different personality of users in human to computer interaction. In this manner, the study on how people feel and how cognitive TV responds accordingly, plus the effects of media as cognitive mechanism will be thoroughly discussed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.62-67
• /
• 2001

In the recent mobile communication systems, the performance of Turbo Code using the error correction coding depends on the interleaver influencing the free distance determination and the recursive decoding algorithms that is executed in the turbo decoder. However, performance depends on the interleaver depth that need a large time delay over the reception process. Moreover, Turbo Code has been known as the robust ending method with the confidence over the fading channel. The International Telecommunication Union(ITU) has recently adopted as the standardization of the channel coding over the third generation mobile communications such as IMT-2000. Therefore, in this paper, we proposed of the method to improve the conventional performance with the parallel concatenated 4-New Turbo Decoder using MAP a1gorithm in spite of complexity increasement. In the real-time video and video service over the third generation mobile communications, the performance of the proposed method was analyzed by the reduced decoding delay using the variable decoding method by computer simulation over AWGN and fading channels.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.44-50
• /
• 2007

In this paper generating algorithms of the conventional chaos code sequences and a new chaos code sequence derived from the real and imaginary parts of FFT of one chaos code sequence, and the time-frequency function characteristics of generated code sequences to measure the signal resolution, are considered. And two chaos based QCSK digital communication systems-one with two different chaos code sequences, the other with FFT of one chaos code sequence-are analyzed in AWGN and fading communication channels. After analyzing the correlation functions of such sequences, the delta-like autocorrelation and near zero crosscorrelation functions of them are very suitable for chaos based spread spectrum communication systems, is verified. Through evaluating the performance of two chaos based QCSK systems above using Monte-Carlo simulation, the improvement of performance in the latter QCSK system compare favorably with that of the former system, is shown.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.99-106
• /
• 2010

In this paper, we propose an industrial fluid monitoring system which performs the flow control function and monitors fluid pressure transmitted from MFC(Mass Flow Controller) unit. This system consists of MFC unit, channel device, and monitoring management software. MFC unit transmits the measured data of the fluid pressure to the channel device which would provide the input/output interface between management software, monitoring and MFC unit. The monitoring and management software control and analyze by monitoring real time measurements of fluid pressure from each channel of MFC unit. This software can process 20 channels and 0.1 monitoring cycle which gives 200 data measurement per second (i.e., 720,000 data/hour). At this time, the storage space increases in proportion to the rise of input data. This growth of data and storage space makes loss of data access efficiency. Therefore, it demands the implementation by sensing scheme of change scope and data, which can effectively manage the data.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.372-375
• /
• 2004

The UV radiometer payload was launched successfully from the west coastal area of Korea Peninsula aboard KSR-III on 28, Nov 2002. KSR-III was the Korean third generation sounding rocket and was developed as intermediate step to larger space launch vehicle with liquid propulsion engine system. UV radiometer onboard KSR-III consists of UV and visible band optical phototubes to measure the direct solar attenuation during rocket ascending phase. For UV detection, 4 channel of sensors were installed in electronics payload section and each channel has 255, 290, 310nm center wavelengths, respectively. 450nm channel was used as reference for correction of the rocket attitude during the flight. Transmission characteristics of all channels were calibrated precisely prior to the flight test at the Optical Lab. in KARI (Korea Aerospace Research Institute). During a total of 231s flight time, the onboard data telemetered to the ground station in real time. The ozone column density was calculated by this telemetry raw data. From the calculated column density, the vertical ozone profile over Korea Peninsula was obtained with sensor calibration data. Our results had reasonable agreements compared with various observations such as ground Umkhr measurement at Yonsei site, ozonesonde at Pohang site, and satellite measurements of HALOE and POAM. The sensitivity analysis of retrieval algorithm for parameters was performed and it was provided that significant error sources of the retrieval algorithm.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.5
• /
• pp.44-56
• /
• 2009

Multimedia streaming service is susceptible to loss and delay of data as it requires high bandwidth and real time processing. Therefore QoS cannot be guaranteed due to data loss caused by heavy network traffic and error of wireless channel. To solve these problems, studies about algorithms which improve the quality of multimedia by serving differently according to the priority of packets in multimedia stream. Two algorithms are proposed in this paper. The first algorithm proposed is WMS-1(Wireless Multimedia Scheduling-1) algorithm which acts like IWFQ when any wireless loss is occurred but assigns channels first in case of urgent situation like when the running time of multimedia runs out. The second algorithm proposed is WMS-2(Wireless Multimedia Scheduling-2) algerithm that assigns priority to multimedia flow and schedules flow that has higher priority according to type of frame first. The comparison with other existing scheduling algorithms shows that multimedia service quality of the proposed algorithm is improved and the larger the queue size of base station is, the better total quality of service and fairness were gained.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.11
• /
• pp.502-510
• /
• 2006

In this paper, we describe implementation of a computer access device for the severly motor-disability. Many people with severe motor disabilities need an augmentative communication technology. Those who are totally paralyzed, or 'locked-in' cannot use conventional augmentative technologies, all of which require some measure of muscle control. The forehead is often the last site to suffer degradation in cases of severe disability and degenerative disease. For example, In ALS(Amyotrophic Lateral Sclerosis) and MD(Muscular dystrophy) the ocular motorneurons and ocular muscles are usually spared permitting at least gross eye movements, but not precise eye pointing. We use brain and body forehead bio-potentials in a novel way to generate multiple signals for computer control inputs. A bio-amplifier within this device separates the forehead signal into three frequency channels. The lowest channel is responsive to bio-potentials resulting from an eye motion, and second channel is the band pass derived between 0.5 and 45Hz, falling within the accepted Electroencephalographic(EEG) range. A digital processing station subdivides this region into eleven components frequency bands using FFT algorithm. The third channel is defined as an Electromyographic(EMG) signal. It responds to contractions of facial muscles and is well suited to discrete on/off switch closures, keyboard commands. These signals are transmitted to a PC that analyzes in a time series and a frequency region and discriminates user's intentions. That software graphically displays user's bio-potential signals in the real time, therefore user can see their own bio-potentials and control their physiological signals little by little after some training sessions. As a result, we confirmed the performance and availability of the developed system with experimental user's bio-potentials.

• Journal of Distribution Research
• /
• v.1 no.1
• /
• pp.41-63
• /
• 1996

In spite of economy has a critical cycle such as, production, distribution and consumption, we hardly concentrated our study to distributional system and behavior. Especially in Korea, Traditional idea had tried to ignore the people who work in this economic value at all. Manufacturers, other than retailers and wholesalers, had a belief that the manufacturing can control distributional channels forever. Unfortunately, technological and educational advances caused the quality equalization among developing and developed countries as well as among big and small manufacturers in their products. By this reason, economists are searching the economists dark continet' mentioned by Peter Drucker as a new source of wealth. According to a report by well-known economic research institute in Switzerland, Korea has classified in the lower level group in terms of international compatitive power. At the same time, business firms complain that they are suffering from lack of SOC and infrastructures. As an important mean to overcome the economic bottleneck, economists suggest in improve our distributional atmosphere. Basically, distributional study has two sub-fields as: commercial and physical distributions, Distributional system mainly concerns about to shorten the distances of time and space between production and consumption. The closer the distances, the higher efficiency can be achieved. Building distributional system will cost, but tile results will save social costs. Based on this idea, economists proposed several ways to cut the distances and to save costs, Naturally, they hope their beliefs can be adapted by business firms and governments. But frequently, their theories doesn't make any fruit. This paper has studied about the composition of joint transportational and distributional systems. And, even though there's no Marshall in tile real world at this point authors are trying to define the transportational and physical distributional costs, the most powerful factor that can impact to economic decision making.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.391-401
• /
• 2004

3D imaging systems using 2D phased arrays have a large number of active channels, compelling to use a very expensive and bulky beamforming hardware, and suffer from low volume rate because, in principle, at least one ultrasound transmit-receive event is necessary to construct each scanline. A high speed 3D imaging method using a cross array proposed previously to solve the above limitations can implement fast scanning and dynamic focusing in the lateral direction but suffer from low resolution except at the fixed transmit focusing along the elevational direction. To overcome these limitations, we propose a new real-time volumetric imaging method using a cross array based on the synthetic aperture technique. In the proposed method, ultrasound wave is transmitted successively using each elements of an 1D transmit array transducer, one at a time, which is placed along the elevational direction and for each firing, the returning pulse echoes are received using all elements of an 1D receive array transducer placed along the lateral direction. On receive, by employing the conventional dynamic focusing and synthetic aperture method along lateral and elevational directions, respectively, ultrasound waves can be focused effectively at all imaging points. In addition, in the proposed method, a volume of interest consisting of any required number of slice images, can be constructed with the same number of transmit-receive steps as the total number of transmit array elements. Computer simulation results show that the proposed method can provide the same and greatly improved resolutions in the lateral and elevational directions, respectively, compared with the 3D imaging method using a cross array based on the conventional fixed focusing. In the accompanying paper, we will also propose a new real-time 3D imaging method using a cross array for improving transmit power and elevational spatial resolution, which uses linear wave fronts on transmit.