• Wind and Structures
• /
• 제16권5호
• /
• pp.477-490
• /
• 2013

This paper presents results of calculations performed according to our own semi-empirical mathematical model of critical vortex excitation. All calculations are carried out using own computer program, which allows the simulation of both the across-wind action caused by vortices and the lateral response of analysed structures. Vortex excitation simulations were performed in real time taking into account wind-structure interaction. Several structures of circular cross-sections were modelled using a FEM program and calculated under the action of critical vortex excitation. Six steel chimneys, six concrete chimneys and two concrete towers were considered. The method of selection and estimation of the experimental parameters describing the model are also presented. Finally, the results concerning maximum lateral top displacements of the structures are compared with available full-scale data for steel and concrete chimneys.

• 방송공학회논문지
• /
• 제24권2호
• /
• pp.357-360
• /
• 2019

본 논문은 임베디드 GPU에서 실시간 동작하는 딥 컨볼루션 뉴럴 네트워크(CNN) 기반의 보행자 탐지 기법을 제안한다. 제안하는 기법에서는 먼저 영상 내 보행자 크기에 대한 통계적 분석을 통해서 최적의 컨볼루션 층의 개수를 결정한다. 또한, 본 논문에서는 다중 스케일 CNN 학습 기법을 적용하여 영상 내의 보행자 크기 변화에 강인한 탐지 기법을 개발한다. 컴퓨터 모의실험을 통해 제안하는 알고리즘이 임베디드 GPU에서 실시간 동작하면서도 기존의 기법과 비교하여 평균적으로 높은 정확도를 보임을 확인한다.

• 한국전문물리치료학회지
• /
• 제25권1호
• /
• pp.1-11
• /
• 2018

Background: The continuous co-contraction of the trunk muscles through trunk stabilization exercises is important to patients with lumbar spinal stenosis (LSS). However, intentional abdominal muscle contraction (IAMC) for trunk stabilization has been used only for specific training in the treatment room. Objects: The purpose of this study was to provide feedback to adults with LSS to enable IAMC during activities of daily living (ADLs). Methods: The participants with spinal stenosis were divided into an experimental group of 15 adults and a control group of 16 adults. Electromyographic signals were measured while the subjects kept their both hands held up at $90^{\circ}$. The measured muscles were the rectus abdominis (RA), external oblique (EO), internal oblique (IO), and erector spinae (ES). Pelvic tilt was measured using a digital pelvic inclinometer. The degree of pain was measured using the visual analogue scale (VAS) and functional capacity was measured using the Korean version of the Oswestry disability index (KODI). Results: While the experimental group showed statistically significantly higher activities in the RA, EO, and IO after the intervention compared with the control group. Pelvic tilt was significantly decreased only in the experimental group. Both the experimental and control groups exhibited statistically significant declines in the VAS and KODI (p<.01). In terms of the levels of changes, the experimental group exhibited a statistically significant larger decline only in the VAS and the pelvic tilt when compared with the control group (p<.05). Conclusions: The subjects could stabilize their trunks, and relieve their pain and dysfunctions and reduce pelvic tilt by learning abdominal muscle contraction during ADLs. The combination of therapeutic exercises and IAMC may have greater effects on patients with LSS.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권2호
• /
• pp.67-72
• /
• 2003

A partition integrated air supply system can provide highly personalized environmental control. The supply air is brought up through raised floors and supplied to outlets located on the partition panels. The purpose of this paper is to find out the best design of outlets for optimal occupant comfort within a personal task area. Real scale experiments were conducted to allow for comparisons of outlet designs within a personal task area. Experimental results indicate that the location of an outlet is the most critical factor in improving the efficiency of supply air distribution of a personal task area. Thermal characteristic comparisons were made between the under-floor and the partition supply systems. Experimental results suggest that the partition supply system is more efficient than the under-floor supply system in terms of cooling. Such a system allows occupants to personally control their immediate environment, resulting in higher productivity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.108-113
• /
• 2004

Korea Gas Corp. has developed the design technology of the LNG storage tank. The membrane to be applied inside of the LNG storage tank is provided with corrugations to absorb thermal contraction and expansion caused by LNG temperature changes. It is very important to measure their thermal strains under LNG temperatures by analytical and experimental stress analysis of the membrane. We have developed a stress measurement system using strain gages and measured the strain during cooldown and storing the LNG. We also analyzed the measured data by comparison with the FEM data. On the basis of these results, we could design and assure the application of the Kogas Membrane to large scale LNG storage.

• Architectural research
• /
• 제7권1호
• /
• pp.19-26
• /
• 2005

Unlike other countries, Korea uses various kinds of wall-paper as finishing material. Conventional wall-paper consists of paper and vinyl, and petrochemical ink is used for the decoration of the surface. Adhesive is used to paste the wall with the wall-paper, which emit substantial amounts of VOCs and formaldehyde. In this study, VOCs characteristics emitted from specimens made of concrete, mortar, gypsum board and wall-paper were investigated using small chamber method. Moreover, concentration and emission factor of BTEX(Benzene, Toluene, Ethylbenzene, m,p,o-Xylene) and TVOC were investigated, and concentration and emission factor decay were estimated. As a result of the prediction, both time-dependent concentration decay and cumulative concentration can be converted into the logarithmic scale. Furthermore, prediction equations were developed from the experimental results under accurately controlled experimental conditions. Therefore, there may be difference if the estimated equations are directly applied to real buildings. Further research should be done on the generalization of the developed prediction equations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.57-58
• /
• 2009

기존연구 결과에 의하면 순환굵은골재 콘크리트를 사용한 경우와 순환잔골재 콘크리트를 사용했을 경우 모두에서 구조부재의 내력저하는 나타나지 않고 천연골재와 동등한 성능을 나타내었다. 이러한 연구결과를 바탕으로 순환굵은골재와 순환잔골재를 혼합 사용한 실물부재 콘크리트보에서 역학적 성능평가를 목적으로 하고 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.455-458
• /
• 2005

The Steel-Confined Prestressed Concrete Girder(SCP Girder) has been developed, which maximizes structural advantages of components (concrete, steel plate and tendon) and can be used to construct the middle or long span bridge with low-height girder. And recently, a continuous beam type of SCP Girder has been being developed to decrease size and self weight of girder in comparison with a simply-supported type. In this study, as part of developing the continuous beam type of SCP Girder, a new type of anchorage zone is proposed in order to address tendons effectively and decrease section size of SCP Girder efficiently. And also, the experimental test was carried out using a real scale specimen to examine the behavior of proposed anchorage zone.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.111-114
• /
• 2005

This paper presents a comparison of experimental value by hemispherical grounding simulation system and calculated value by CDEGS program for ground potential rise of structure. When a test current flowed through structure grounding electrodes, ground potential rise was measured and analyzed for types of structure using the hemispherical grounding simulation system in real time, and was computed by means of CDEGS program. The model structures were designed and fabricated with two types on a scale of one-one hundred sixty. When the experimental data were compared with the theoretical values, the similar profile was shown. Therefore, the confidence of measurement was obtained. The distributions of ground surface potential are dependent on the resistivity and absorption percentage in concrete attached to structure.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1031-1054
• /
• 2014

Real-time hybrid simulation (RTHS) of a stacked wood shear wall retrofitted with a rate-dependent seismic energy dissipation device (viscous damper) was conducted at the newly constructed Structural Engineering Laboratory at the University of Alabama. This paper describes the implementation process of the RTHS focusing on the controller scheme development. An incremental approach was adopted starting from a controller for the conventional slow pseudodynamic hybrid simulation and evolving to the one applicable for RTHS. Both benchmark-scale and full-scale tests are discussed to provide a roadmap for future RTHS implementation at different laboratories and/or on different structural systems. The developed RTHS controller was applied to study the effect of a rate-dependent energy dissipation device on the seismic performance of a multi-story wood shear wall system. The test specimen, setup, program and results are presented with emphasis given to inter-story drift response. At 100% DBE the RTHS showed that the multi-story shear wall with the damper had 32% less inter-story drift and was noticeably less damaged than its un-damped specimen counterpart.