• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.213-214
• /
• 2009

본 연구에서는 레미콘 배처플랜트를 이용하여 제조한 SHCC의 휨 및 인장특성을 평가하고, 이를 실내실험 결과와 비교 검토하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.136-137
• /
• 2018

The properties of concrete produced by ready mixed concrete company in Busan were measured. Because the concrete was mixed with blast furnace slag and fly ash etc., the compressive, tensile strength and chloride ion diffusion coefficient were lower than OPC concrete even though the specified concrete strength was same. If the durability about salt attack were satisfied, the concrete of lower specified concrete strength would be adopted to concrete mixing design. FEM analysis was carried out to predict the life time expectancy.

• 한국건축시공학회지
• /
• 제22권2호
• /
• pp.137-148
• /
• 2022

본 연구는 레디믹스트 콘크리트의 환경성적표지 현황 조사와 이를 통한 레디믹스트 콘크리트 규격, 생애주기, 권역별 탄소배출량 특성 분석을 목적으로 한다. 이를 위해 콘크리트 산업의 탄소배출량 산정이 요구되고 있는 관련 인증제도를 분석하고, 레디믹스트 콘크리트 제품의 탄소배출량 현황분석을 위해 전과정평가 기법에 기반한 EPD 인증을 받은 제품군을 대상으로 하여 레디믹스트 콘크리트의 활성화 정도를 분석하였다. 또한 레디믹스트 콘크리트 제품의 생애주기별 탄소배출량 분석, 규격별 탄소배출량 분석, 권역별 탄소배출량 분석을 수행하여 각 특성에 따른 탄소배출량 추이를 검토하였다. 분석결과 생애주기별 탄소배출량은 제조전단계가 99% 수준을 나타냈으며, 18MPa에서 40MPa로 증가할수록 탄소배출량도 증가하는 추세를 보였다. 단, 동일 규격이라고 하더라도 수도권의 탄소배출량이 남부지역 대비 높은 탄소배출량을 나타냈다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.21-26
• /
• 2004

This study deals with the Hydrated Ability of the Ready-Mixed Concrete's Sludge which is the recycling technology of that sludge. The experiment gathers sludge from Ready-mixed factory. shatters these into pieces in dry condition and understands the differences between current using Portland cement. And then. this examines the possibility of the recycle as a bonding agent through the Compressive Strength and considers the recovery of the hydration. This experiment concludes the same Chemical Composition with the normal Portland cement. while. under the appropriate procedure in hydration recovery. this sludge can be used as the bonding agent in cement. The chemical composition of solid Remicon sludge shows that it has 1.8 times $SiO_2$ than the normal Portland cement. meaning lots of aggregate in Remicon sludge. Also. the specific gravity of Remicon sluge increases with the rise of Baking Temperature and has no difference between 2.77 and 2.94. The mortar flow used for combining the baking material of Remicon sludge does was not changed and is the highest between $750^{\circ}C{\cdot}120min\;and\;800^{\circ}C{\cdot}180min$. Additionally. the Compressive Strength increases with the age, certifying the same Hydrated Ability like cement and the best condition for hydration is $750^{\circ}C{\cdot}120min.$

• 한국건설순환자원학회논문집
• /
• 제9권1호
• /
• pp.92-99
• /
• 2021

CaO 화합물의 원료로는 일반적으로 CaO, SO3, Al2O3 등으로 구성된 CaO 기반인 산업부산물이 있다. 이러한 CaO 계 산업부산물을 레미콘의 회수수에 적용할 경우 시멘트, 플라이애시, 슬래그미분말 등의 콘크리트 분말 원료의 수화 반응이 가속화되어 콘크리트 성능을 향상시킬 수 있다. 본 연구에서는 레미콘의 회수수에 C12A7을 함유한 열연 슬래그를 혼입하여 레미콘의 회수수에 적용할 수 있는 활성슬러지를 제조하였으며, 시멘트 페이스트 응결시간 및 모르타르 압축강도 성능 테스트를 통해 수화반응에 대한 영향을 확인하고자 하였다.

• 시멘트
• /
• 통권15호
• /
• pp.47-58
• /
• 1966

• 한국환경보건학회지
• /
• 제47권3호
• /
• pp.267-278
• /
• 2021

Objectives: Using atmospheric dispersion representative models (AERMOD and CALPUFF), the emissions characteristics of each model were compared and analyzed in ready-mixed concrete manufacturing facilities that generate a large amount of particulate matter (PM-10, PM-2.5). Methods: The target facilities were the ready-mixed concrete manufacturing facilities (Siheung RMC, Goyang RMC, Ganggin RMC) and modeling for each facility was performed by dividing it into construction and operation times. The predicted points for each target facility were selected as 8-12ea (Siheung RMC 10, Goyang RMC 8, and Gangjin RMC 12ea) based on an area within a two-kilometer radius of each project district. The terrain input data was SRTM-3 (January-December 2019). The meteorological input data was divided into surface weather and upper layer weather data, and weather data near the same facility as the target facility was used. The predicted results were presented as a 24-hour average concentration and an annual average concentration. Results: First, overall, CALPUFF showed a tendency to predict higher concentrations than AERMOD. Second, there was almost no difference in the concentration between the two models in non-complex terrain such as in mountainous areas, but in complex terrain, CALPUFF predicted higher concentrations than AERMOD. This is believed to be because CALPUFF better reflected topographic characteristics. Third, both CALPUFF and AERMOD predicted lower concentrations during operation (85.2-99.7%) than during construction, and annual average concentrations (76.4-99.9%) lower than those at 24 hours. Fourth, in the ready-mixed concrete manufacturing facility, PM-10 concentration (about 40 ㎍/m³) was predicted to be higher than PM-2.5 (about 24 ㎍/m³). Conclusions: In complex terrain such as mountainous areas, CALPUFF predicted higher concentrations than AERMOD, which is thought to be because CALPUFF better reflected topographic characteristics. In the future, it is recommended that CALPUFF be used in complex terrain and AERMOD be used in other areas to save modeling time. In a ready-mixed concrete facility, PM-10, which has a relatively large particle size, is generated more than PM-2.5 due to the raw materials used and manufacturing characteristics.

• 콘크리트학회지
• /
• 제3권4호
• /
• pp.16-22
• /
• 1991

• 콘크리트학회지
• /
• 제25권1호
• /
• pp.25-28
• /
• 2013

• 콘크리트학회지
• /
• 제5권3호
• /
• pp.3-9
• /
• 1993