• 한국수자원학회논문집
• /
• 제45권1호
• /
• pp.1-13
• /
• 2012

수질모델링에 필요한 다양한 입력데이터는 관련 정보의 확보방안 및 표준화가 되어 있지 않아 수질모델링 결과 및 수질분석에 많은 영향을 주고 있다. 이에 본 연구에서는 효율적인 수질 모델링을 위해 정확한 수리 수문 데이터를 기반으로 한 수질모델링의 기초자료 데이터베이스인 한국형 Reach File을 설계하였다. 한국형 Reach File은 동일한 수리학적 특색을 가지는 구간(Reach)에 대한위치정보 기반의 수리학 데이터베이스로써, 각 구간을 대표할 수있는 Reach 코드와 Catalog Unit, Segment, Marker Index의 위상정보를 갖고 있으며 하천명이나 하천코드와 같은 기존 코드와의 연계를 고려하여 설계되었다. 설계방안을 토대로 경기도 광주시의 경안천을 대상으로 시범 구축을 통하여 본 설계안을 검토한 결과, 수질모델링에 필요한 기초데이터를 하나의 기준으로 체계화하여 하천정보를 데이터베이스화하고 기 구축 데이터베이스와의 연계 및 활용방안도 마련할 수 있었다. 또한, 각 구간별로 정의된 Reach 코드를 이용하여 수질기초시설, 오염원데이터, 관리기관 등 기존 데이터베이스와 연계를 통해 보다 체계적인 수질의 관리가 가능함을 알 수 있었다. 향후 연구에서는 Reach 코드를 하천공간데이터의 국가표준데이터로 선정할 수 있도록 하천 정보 표준화에 관한 연구가 필요하며, 전국 모든 하천에 Reach 코드를 부여하여 보다 많은 데이터베이스와의 연계할 수 있는 방안을 마련해야 할 것이다.

• The Journal of Korean Physical Therapy
• /
• 제34권6호
• /
• pp.317-320
• /
• 2022

Purpose: This study aimed: to confirm the balance ability of patients with spinal cord injury in the sitting state through a functional reach test using an elastic aid; and to propose a balance improvement plan. Methods: The study evaluated seven patients with spinal cord injury who could maintain a sitting posture through minimum assistance. A functional reach test was performed before and after wearing an elastic aid while sitting on a chair, and the effects before and after use of the elastic aid were compared and analyzed through a motion analyzer. Results: In the functional reach test, the forward movement distance of the hand was 97.45 mm before wearing the elastic aid, but significantly increased to 131 mm after wearing the aid (p<0.05). Corresponding forward movement distances for the shoulder were 81.26 mm and 113 mm (p<0.05 for the increase). There was no statistically significant change in lateral functional arm extension. Conclusion: It was confirmed, through a functional reach test, that trunk stability in patients with spinal cord injury increased with use of an elastic aid. In future, more efficient rehabilitation treatment programs will be possible if trunk stability in patients with spinal cord injury is improved by using elastic aids, and if various exercise treatments are also included in the rehabilitation programs.

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.1-7
• /
• 2019

The reach truck, which is mainly used in warehouses, is required to have high-mast to improve its working efficiency and space utilization. The high-mast takes advantage of more vertical space but severe vibrations are easily generated at the end of the high-mast. These vibrations may cause a collision or misplacement of loading location at work. In this study, the vibration characteristics of a three-stage high-mast of a reach truck are analyzed, and an active vibration controller verified through a similar experiment is designed to reduce this vibration. A similar experiment for reach truck mast verifies the performance of the active vibration controller. By applying an active vibration controller designed for a real reach truck, the operations of the reach truck are made more efficient through the reduction of the vibration amplitude.

• Korean Journal of Hydrosciences
• /
• 제2권
• /
• pp.69-84
• /
• 1991

US NWS/NETWORK is applied for the analysis of the flood of July 11-15, 1981 through the Goan-Indogyo reach of the Han River. For the flood hydrography synthesis of the lateral inflows from the major tributaries into the main reach the Cleak method is employed. NETWORK coupled with the Clark method of hydrography synthesis simulated with a fair accuracy the oberved flood hydrograph at the downstream boundary of the routing reach. The dffect of SCS runoff curve number for fributary flood synthesis is evaluated. The characteristics of the station variations and time variations of the flood discharges in the reach is also analyzed.

• ETRI Journal
• /
• 제34권3호
• /
• pp.352-360
• /
• 2012

This paper proposes a low-cost, low-power, and high-capacity optical-electrical-optical-type reach extender that can provide 3R frame regeneration and remote management to increase the reach and split ratio with no change to a legacy time division multiple access passive optical network. To provide remote management, the extender gathers information regarding optical transceivers and link status per port and then transmits to a service provider using a simple network management protocol agent. The extender can also apply to an Ethernet passive optical network (E-PON) or a gigabit-capable PON (G-PON) by remote control. In a G-PON, in particular, it can provide burst mode signal retiming and burst-to-continuous mode conversion at the upstream path through a G-PON transmission convergence frame adaptor. Our proposed reach extender is based on the quad-port architecture for cost-effective design and can accommodate both the physical reach of 60 km and the 512 split ratios in a G-PON and the physical reach of 80 km and the 256 split ratios in an E-PON.

• Environmental Engineering Research
• /
• 제25권1호
• /
• pp.123-128
• /
• 2020

Non-point source pollutant load reductions were calculated using the Hydrologic Simulation Program-Fortran (HSPF) model under the assumption that landuse pattern was changed according to land purchases. Upon the simulation of non-point pollutant and areas with high land purchase ratios to select a buffer zone, the Namgang dam Reach 11, Imha dam Reach 10, and the Reach 136 watershed of the main river were found to rank high for the construction of buffer zones. Assuming that the forms of the purchased lands were changed to wetlands, biological oxygen demand (BOD) loads were changed through the HSPF model. No changes of BOD were present in the Namgang dam and the Imha dam watersheds. BOD loads in Reach 136 according to landuse change were analyzed through a flow duration analysis based on the total maximum daily loads of the United States. The flow duration analyses undertaken to examine changes in BOD of main river Reach 136 watershed indicated a shift of 0.64 kg/d from 3.16 to 2.52 during high flow. The change of BOD under the conditions of moist, mid-range and dry were 11.9%, 9% and 4.5%. At the low flow condition, the variation range in the BOD load was from 0.58 kg/d to 0.41 kg/d.

• 한국환경보건학회지
• /
• 제50권4호
• /
• pp.237-256
• /
• 2024

Background: Human health and environment exposure assessments of chemicals are essential part for REACH and BPR as well as K-REACH and K-BPR. Several useful exposure assessment tools have been developed and updated to become extensively used during more than fifteen years of chemical registrations under REACH and their updates are still going on. Objectives: Evolution of regulatory tools for environment, workers and consumers exposure assessments under REACH is investigated focusing on why and how tools have been developed and updated for the future regulatory tools in Korea. Methods: REACH regulatory tools including EUSES, ECETOC TRA and CHESAR as well as built-in models SimpleTreat and SimpleBox were chosen with other frequently used Tier 1 and 2 tools. Available resources such as homepage information, background documents, related scientific reports, relevant journal publications, up-to-date lists of new version publications, release notes and user guides were reviewed extensively and summarized using easy-readable Tables and Figures. Results: SimpleTreat and SimpleBox are built-in models both for EUSES and ECETOC TRA (Environment). ECHA's CHESAR contains ECETOC TRA (Workers) and ECETOC TRA (Consumers) as well as EUSES and ECETOC TRA (Environment) for environment exposure assessment while results of Tier 2 Stoffenmanager and ConsExpoWeb can be imported. Evolution of CHESAR from version 1 (2010) to 3.8 (2023) has focused on the compatibility of frequent updates of IUCLID, importing functionality, editability, updated use maps, harmonised conditions of use as well as updates of the built-in tools evolved according to scientific development, refinements of the tool, increased conservatism and user-friendliness. CHESAR Platform 1.0 will soon be published to serve both for REACH and BPR. Conclusions: Updates of the tools can be successfully continued by transparency of the tools, participation of industry sectors for tool refinements and tool developers'/authorities' encouragements of partners/users to jointly innovate tools through scientific researches, tool validations and user feedback.

• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.90-99
• /
• 2007

We demonstrate an 80km-reach 64-channel DWDM-PON based on wavelength-locked F-P LDs by changing the position of the C-band BLS for upstream channels from the CO to the RN. It mitigates the necessity of the high power C-band BLS and its handling problems. It also reduces back scattering induced penalty. We obtained less than $10^{-6}$ PLRs in all 128channels through 80km SMF. We also demonstrate a 240km-reach DWDM-PON based on wavelength-locked F-P LDs by adding a bidirectional erbium-doped fiber amplifier(EDFA). We show packet-loss-free transmission in all 128channels at 125 Mb/s per channel over 240km SMF We report the detuning effect of arrayed waveguide gratings(AWGs) and crosstalk effect in the implemented system. We Propose an architecture of a next generation defense wire communication system with the demonstrated long-reach DWDM-PON.

• 한국수자원학회논문집
• /
• 제35권6호
• /
• pp.715-727
• /
• 2002

하도구간의 도달시간은 일정 구간별로 하도길이를 홍수가 하류로 유하하는 평균유속으로 나눔으로써 산정 할 수 있으며, 유역추적법에 의한 홍수량 산정 시 필요한 저류상수 등과 매우 밀접한 관계를 가지고 있다. 이러한 도달시간을 산정 할 수 있는 경험공식이 많이 제시되고 있으나 경험공식별로 계산된 도달시간은 일반적으로 큰 편차를 나타내고 있다. 본 연구에서는 100개 이상 하천의 확률홍수량에 대한 수면곡선계산 자료에서 구간별 하도의 평균경사와 평균유속을 수집하였다. 이러한 평균경사와 평균유속과의 관계를 회귀분석한 결과를 살펴보면 동일한 평균경사에서도 평균유속이 많이 산포 되어 있음을 알 수 있으며 이는 지역별 확률강우량의 차이와 하천별 유역면적의 차이 등에 기인한다. 따라서, 지역별 확률강우량의 차이와 하천별 유역면적의 차이에 대한 영향을 제거하는 방법을 개발하여 일반화된 평균경사-평균유속 관계를 제시하였다. 이에 따라 하천종단에서 구간별 평균경사를 산정하면 일반화된 평균경시-평균유속의 관계를 사용하여 일반화된 평균유속을 산정 할 수 있으며, 이를 지역별 확률강우량의 차이와 하천별 유역면적의 차이에 대하여 보정하여 대상하천에 대한 평균유속을 산정하고 이를 이용하여 도달시간을 산정 하게된다.

• 한국통신학회논문지
• /
• 제36권6B호
• /
• pp.583-591
• /
• 2011

본 논문에서는 기존 G-PON(Gigabit Passive Optical Network) 링크에 RSOA(Reflective Semiconductor Optical Amplifier) 기반 DWDM-PON(Dense Wavelength Division Multiplexing-PON) 기술과 O/E/O 변환 방식의 RE(Reach Extender) 기술을 적용하여 전송거리와 링크 용량 그리고 분기수를 증가시킬 수 있는 2.5 Gbps 하이브리드 PON 링크의 구조를 제안한다. RSOA 기반 DWDM-PON 기술은 간선 중계링크에 적용되어, 기존 G-PON 보다 최대 32배의 링크 전송용량을 제공할 수 있다. RE 기술은 원격노드에서 GTC(GPON Transmission Convergence) 프레임의 재 변조를 통해 DWDM-PON과 G-PON 사이의 파장변환 기능을 제공하며, 상향 프레임의 수신을 위한 버스트 모드 리셋 신호를 제공한다. 본 논문에서 제안된 하이브리드 PON은 상용 G-PON 시스템을 사용하여 WDM 신호 파장 당 최대 60 km의 전송거리와 128분기를 제공할 수 있다.