• Journal of Korean Elementary Science Education
• /
• v.32 no.1
• /
• pp.71-81
• /
• 2013

This study aimed to investigate the changes in learner's scientific conceptual formation and academic achievement after a CoRe-based science lesson. For this study, two classes of the 6th grade of elementary school were divided into an experimental class and a comparison one. The students of the experimental class received CoRe-based science lesson and those of the comparison one received general science lesson. Both of the classes studied 'unit 1. A change in the weather', which is a part of content of 6th grade science text book. The results of this study were as follows. First, in the questions of invisible and abstract phenomena, students had misconceptions based on their experience in real life, or did not understand the fundamental causes of that phenomena. But after receiving lessons respectively, experimental class generally showed at a higher rate of understanding the causes of the phenomena than comparison class. Second, CoRe-based science lesson was more effective to improve students' scientific conceptual formation than the general science lesson. Moreover, when two classes were respectively divided into two groups as high and low-level groups according to their pre-test achievement records, the CoRe-based science lesson was more effective to learners of the high-level groups. Third, CoRe-based science lesson was more effective to enhance students' academic achievements than the general science lesson, especially to learners of the low-level groups.

• Journal of Science Education
• /
• v.37 no.1
• /
• pp.221-232
• /
• 2013

The purpose of this study was to examine the effect of the CoRe-based density unit class on conceptual formation and on learner satisfaction with the class. For this study, two hundred and forty 8th grade students were chosen from six classes. The students were divided into two groups: an experimental group, which received a CoRe-based density unit lesson, and a control group, which was taught based on traditional teaching method. The CoRe-based density unit classes consisted of 4 periods based on the analysis of the previous studies on CoRe about density. The results showed the meaningful significant difference between the CoRe-based classes and the classes based on traditional teaching method both in the posttest on the extent of the conceptual formation on the density and in the retention test. The difference suggests that the lesson with CoRe is based on the consideration of the difficulties and limitations students face in various fields such as the students themselves, teachers, learning environment, evaluation, etc. during their learning process and even in the types of preconception they have, and the CoRe-based lesson is centered around the best teaching strategies to solve such difficulties. As a result of the analysis on the experimental group's class satisfaction, it is revealed that the students with a high level of attitudes related science or with a high level of science achievement showed especially high satisfaction in their learning. Analysis of questionnaire survey showed that the students in the experimental group got the opportunity through CoRe-based lesson to stretch their thoughts and ideas in a free way and preferred a teaching method which didn't just show the concept, but allowed them to find it for themselves or which let them predict the solution and then confirm the result on their own and a lesson which encouraged their active participation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.343-344
• /
• 2012

It has been known since the mid 1960s that Ag can be photodissolved in chalcogenide glasses to form materials with interesting technological properties. In the 40 years since, this effect has been used in diverse applications such as the fabrication of relief images in optical elements, micro photolithographic schemes, and for direct imaging by photoinduced Ag surface deposition. ReRAM, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of a conductive filament in a solid electrolyte. Especially, Ag-doped chalcogenide glasses and thin films have become attractive materials for fundamental research of their structure, properties, and preparation. Ag-doped chalcogenide glasses have been used in the formation of solid electrolyte which is the active medium in ReRAM devices. In this paper, we investigated the nature of thin films formed by the photo-dissolution of Ag into Ge-Se glasses for use in ReRAM devices. These devices rely on ion transport in the film so produced to create electrically programmable resistance states. [1-3] We have demonstrated functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of Ag+ ions photo-induced diffusion in thin chalcogenide films is considered. The influence of Ag+ ions is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Saturated Ag+ ions have been used in the formation of conductive filaments at the solid electrolyte which is the active medium in ReRAM devices. Following fabrication, the cell displays a metal-insulator-metal structure. We measured the I-V characteristics of a cell, similar results were obtained with different via sizes, due to the filamentary nature of resistance switching in ReRAM cell. As the voltage is swept from 0 V to a positive top electrode voltage, the device switches from a high resistive to a low resistive, or set. The low conducting, or reset, state can be restored by means of a negative voltage sweep where the switch-off of the device usually occurs.

• Wind and Structures
• /
• v.30 no.5
• /
• pp.475-483
• /
• 2020

This work investigates Reynolds number Re (= 50 - 200) effects on the flows around a single cylinder and the two tandem (center-to-center spacing L^⁎= L/D = 4) cylinders, each of a diameter D. Vorticity structures, Strouhal numbers, and time-mean and fluctuating forces are presented and discussed. For the single cylinder, with increasing Re in the range examined, the vorticity magnitude, Strouhal number and fluctuating lift all monotonically rise but time-mean drag, vortex formation length, and lateral distance between the two rows of vortices all shrink. For the two tandem cylinders, the increase in Re leads to the formation of three distinct flows, namely reattachment flow (50 ≤ Re ≤ 75), transition flow (75 < Re < 100), and coshedding flow (100 ≤ Re ≤ 200). The reattachment flow at Re = 50 is steady. When Re is increased from 75 to 200, the Strouhal number of the two cylinders, jumping from 0.113 to 0.15 in the transition flow regime, swells to 0.188. The two-cylinder flow is more sensitive to Re than the single cylinder flow. Fluctuating lift is greater for the downstream cylinder than the upstream cylinder while time-mean drag is higher for the upstream cylinder than for the other. The time-mean drags of the upstream cylinder and single cylinder behaves similar to each other, both declining with increasing Re.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.237.2-237.2
• /
• 2013

ReRAM cell, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of conductive filament in a solid electrolyte [1,2]. Especially, Chalcogenide-based ReRAM have become a promising candidate due to the simple structure, high density and low power operation than other types of ReRAM but the uniformity of switching parameter is undesirable. It is because diffusion of ions from anode to cathode in solid electrolyte layer is random [3]. That is to say, the formation of conductive filament is not go through the same paths in each switching cycle which is one of the major obstacles for performance improvement of ReRAM devices. Therefore, to control of nonuniform conductive filament formation is a key point to achieve a high performance ReRAM. In this paper, we demonstrated the enhanced repeatable bipolar resistive switching memory characteristics by spreading the Ag nanocrystals (Ag NCs) on amorphous GeSe layer compared to the conventional Ag/GeSe/Pt structure without Ag NCs. The Ag NCs and Ag top electrode act as a metal supply source of our devices. Excellent resistive switching memory characteristics were obtained and improvement of voltage distribution was achieved from the Al/Ag NCs/GeSe/Pt structure. At the same time, a stable DC endurance (>100 cycles) and an excellent data retention (>104 sec) properties was found from the Al/Ag NCs/GeSe/ Pt structured ReRAMs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.326-326
• /
• 2014

It has been known since the mid 1960s that Ag can be photodissolved in chalcogenide glasses to form materials with interesting technological properties. In the 40 years since, this effect has been used in diverse applications such as the fabrication of relief images in optical elements, micro photolithographic schemes, and for direct imaging by photoinduced Ag surface deposition. ReRAM, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of a conductive filament in a solid electrolyte. Especially, Ag-doped chalcogenide glasses and thin films have become attractive materials for fundamental research of their structure, properties, and preparation. Ag-doped chalcogenide glasses have been used in the formation of solid electrolyte which is the active medium in ReRAM devices. In this paper, we investigated the nature of thin films formed by the photo-dissolution of Ag into Ge-Se glasses for use in ReRAM devices. These devices rely on ion transport in the film so produced to create electrically programmable resistance states [1-3]. We have demonstrated functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of Ag+ ions photo-induced diffusion in thin chalcogenide films is considered. The influence of Ag+ ions is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Saturated Ag+ ions have been used in the formation of conductive filaments at the solid electrolyte which is the active medium in ReRAM devices. Following fabrication, the cell displays a metal-insulator-metal structure. We measured the I-V characteristics of a cell, similar results were obtained with different via sizes, due to the filamentary nature of resistance switching in ReRAM cell. As the voltage is swept from 0 V to a positive top electrode voltage, the device switches from a high resistive to a low resistive, or set. The low conducting, or reset, state can be restored by means of a negative voltage sweep where the switch-off of the device usually occurs.

• Journal of Veterinary Clinics
• /
• v.14 no.2
• /
• pp.161-167
• /
• 1997

This study was carried out to prevent the abdominal re-adhesions in dogs. Two randomized groups of dogs were subjected to scratch the ileal serosa. Routine abdominal closure was performed on two groups. Second laparotomy was performed one month later for the scoring of the abhesion formation. The adhesions were separated physically after the scoring of the adhesions. In control goup saline was instilled into abdomen and in treated group 1% sodium carboxymethylcellulose(SCMC) solution was instilled into abdomen before the abdominal closure. Third laparotomy was performed another month later to evaulate the adhesions. Reduced adhesion formation following the instillation of 1% SCMC was reported. 1% SCMC is recommended to prevent the re-adhesions as well as adhesions.

• Fashion & Textile Research Journal
• /
• v.18 no.1
• /
• pp.15-26
• /
• 2016

Many brands are attempting to use consumers as a part of their marketing strategies, due to the fashion industry's sensitive response to consumers' reaction. In addition, due to the popularity of e-WOM(electronic Word-Of-Mouth), fashion brands are highly sensitive to their supporters' online reviews. Amid this background, the main objectives of this study are as follows: 1) to analyze the effect of online reviews' attributes and valences on forming an impression about a fashion brand; 2) to examine the online re-WOM(word-of-mouth) effect of online reviews by fashion brand supporters on brand attitude; and 3) to measure the moderating effect of fashion involvement in online re-WOM intention. In order to verify the research model and to test the proposed hypotheses, a 2 (utilitarian vs. hedonic review attributes) by 2 (positive vs. negative review valences) model is constructed and gathers 215 respondents. The results demonstrate that consumers form the highest reliable impression based on utilitarian and negative online reviews. However, there is no relationship between the types of online reviews and the formation of a favorable impression. Findings also reveal that the impression formed by online reviews has a positive effect on re-WOM intention, contributing to brand attitude. In addition, the hypothesis about the moderating effect produced by fashion involvement on re-WOM is supported. In conclusion, these results suggest that online reviews by fashion brand supporters have a powerful effect on forming a consumer's impression towards a fashion brand, affecting re-WOM intention and brand attitude.

• Journal of Korea Foundry Society
• /
• v.27 no.1
• /
• pp.24-30
• /
• 2007

The effects of C, Si and RE additions on the tendency of chill formation of ductile cast iron obtained from metal mold casting were investigated. In case of metal mold cast, the ductile cast iron with 2.5%Si had pearlitic matrix, and specimens with 2.9%Si had bull's eye type regardless of C contents. As-cast specimen with a large amount of fine graphites could be obtained by adding 0.2% RE. Normalizing process was necessary to remove carbide and form a large amount of spheroidal graphites for the as-cast specimens. Good mechanical properties could be obtained by heat-treatment of as-cast specimens with pearlitic matrix. Normalizing the specimens with RE caused the reduction in mechanical properties.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.3
• /
• pp.144-149
• /
• 2008

It has been reported that copper and copper alloys have a large anisotropy of functional properties such as electrical, thermal and mechanical properties, which means that the texture of polycrystalline alloy should be considered to achieve better properties. In this study, the determination of grain growth orientation and texture formation in the cold-rolled, heat-treated and Ni-plated hybrid copper sheets was investigated. Grain growth direction and texture formation were analyzed by the X-ray pole figure. The influence of texture on the mechanical properties could be quantitatively confirmed by the results from the orientation distribution function and the tensile test. The heat-treated texture in the cold-rolled hybrid copper sheet is also investigated and discussed.