• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.6-9
• /
• 2011

Step feed process was analyzed stoichiometrically for the optimal operation conditions in this study. In case of optimal operation conditions, minimum R (sludge recycling) value, r (internal recycling ratio) value, and n (influent allocation ratio) value for the step feed process to acquire the maximum TN removal efficiency were identified by theoretical analysis. Maximum TN removal efficiency, based on stoichiometric reaction, can be obtained by controlling n value for the step feed process.

• 한국식품영양과학회지
• /
• 제28권6호
• /
• pp.1212-1219
• /
• 1999

The oils were extracted from the mixture of roasted(for 20 min at 190oC) perilla seeds(RPS) and roasted (commercially) peanuts(RPN) by solvent extraction(SE) and mechanical expression(ME). The effects of mixing ratio on physicochemical characteristics and oxidative stability of their oils were investigated. Yields of both SE and ME oils were increased as the RPN ratio in the mixture increased. In all the SE and ME oils, the major fatty acids were oleic, linoleic and linolenic acid, and total saturated fatty acids increased gradually, but total unsaturated fatty acids decreased gradually as the RPN ratio in the mixture was increased. The specific gravity and refractive index of both SE and ME oils decreased as the RPN ratio in the mixture was increased. Acid value, saponification value and iodine value of SE oils decreased as the RPN ratio in the mixture increased, whereas acid value and iodine value of ME oils decreased and saponification value increased. The colors of ME oils were darker brownish than SE oils. The oxidative stability of SE oils was decreased as the RPN ratio in the mixture increased, whereas that of ME oils was increased. Sensory evaluation of all the oils extracted from the mixture with various mixing ratio showed significant differences in flavor, taste, color and overall acceptance(p<0.01). The oil extracted from the mixture of the mixing ratio of 8:2(RPS:RPN) showed slightly higher preference regardless of extraction method.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.115-121
• /
• 2013

This study was carried out to investigate the effect of hot forging on the hardness and impact value of ultra high carbon low alloy steel. With increasing hot forging ratio, thickness of the network and acicular proeutectoid cementite decreased, and than were broken up into particle shapes, when the forging ratio was 80%, the network and acicular shape of the as-cast state disappeared. Interlamellar spacing and the thickness of eutectoid cementite decreased with increasing forging ratio, and were broken up into particle shapes, which then became spheroidized. With increasing hot forging ratio, hardness, tensile strength, elongation and impact value were not changed up 50%, and then hardness rapidly decreased, while impact value rapidly increased. Hardness and impact value was greatly affected by the disappeared of network and acicular shape of proeutectoid cementite, and became particle shape than thickness reduction of proeutectoid and eutectoid cementite.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권3호
• /
• pp.63-72
• /
• 2020

The study aims to investigate the impact level of earnings quality on firm value. The study has used data with 3,910 observations at listed firms on Vietnam Stock Exchange for the period from 2010 to 2018, and GLS regression analysis is employed in this research. Earnings quality is measured in the aspects of earnings management, earnings persistence, and timeliness of profitability. This study also considers a number of controlled variables that positively influence the firm's value such as firm size, fixed asset investment rate and dividend payout ratio. The results show that earnings quality is positively associated with firm value with having statistical significance. In contrast, some determinants negatively influence firm value such as financial leverage, ratio of market value to book value, and revenue growth. Determinants of firm size, the rate of investment in fixed assets, the rate of dividend payment positively affect the firm value. In contrast, determinants of financial leverage, revenue growth rate and market value to book value ratio are inversely related to firm value according to economic value, Tobin's Q or Price. Based on the findings, some recommendations are proposed for investors, management and policy makers as well in the context of emerging countries including Vietnam.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.325-325
• /
• 2022

In order to developing high-quality rice varieties and processing varieties, systematic and stable evaluation of physicochemical properties is required for breeding lines. In this study, we compared the quality characteristics evaluation results of rice breeding lines for cooked rice, special rice, and whole crop silage rice adapted to central plain region (Suwon) in order to use as basic data for future rice variety development. Brown rice length/width ratio, head rice ratio, protein content, amylose content, alkali digestion value(ADV) and Toyo value were analyzed to evaluate the quality characteristics of yield trial lines cultivated in Suwon for four years (2017-2020). Brown rice length/width ratio, head rice ratio, protein content, ADV and Toyo values showed significant differences by year, but there was no significant difference in amylose content (p<0.05), which showed little environmental variation. The head rice ratio and Toyo value showed an increasing trend, while the protein content showed a decreasing trend. However, the protein content was the highest in 2020, which is thought to be owing to little sunlight hours due to heavy rainfall in 2020. The protein content of whole crop silage rice was 8.1%, which was significantly higher than that of other lines (p<0.05). Toyo value of medium-maturing and early-maturing lines were 67.6 and 73.7%, respectively, and the Toyo value of medium-maturing lines was higher than that of the early-maturing lines (p<0.05). In correlation analysis among the quality characteristics of the rice lines for cooked rice, significant positive correlations were detected between Toyo value and head rice ratio, amylose content, ADV, and a negative correlation was observed between Toyo value and protein content (p<0.05).

• 한국의류학회지
• /
• 제8권2호
• /
• pp.47-57
• /
• 1984

Effect on the hand value and mechanical properties of blend ratio and weight had been investigated Oil summer suits for men. Relation between the mechanical properties and the deformation in behavior was also studied. The mechanical properties which influence the hand values and total hand value had been discussed and the relation between mechanical properties, hand values and fabric count had, too. As result, the following conclusions had been obtained. 1) The values of tensile properties increased with the increase of blend ratio of wool. The values of surface properties increased according to the increase of blend ratio of polyester. 2HB(bending properties) of polyester/wool blend showed higher value than that of $100\%$ wool, but there was no change in the shearing properties according to the blend ratio. The values of stiffness, crispness and anti-drape stiffness of blend fabric showed higher values than those of $100\%$ wool fabric. The value of fullness (including softness) of blend fabric showed lower value than that of $100\%$ wool fabric. 2) The correlation between hand values and mechanical properties showed following order. in stiffness : bending properties>surface properties in crispness: surface properties>bending properties in anti-drape stiffness: bending properties>surface properties>shearing properties.

• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1329-1336
• /
• 2009

본 연구는 지배구조와 기업가치와의 관계에 대해 문헌적 검토를 한 후, 대주주 및 외국인지분율과 기업가치 및 회계지표와의 관계를 엔터테인먼트업종을 중심으로 실증 분석하였다. 연구의 결과는 디음과 같이 요약될 수 있다. 첫째, 엔터테인먼트 업종의 기업가치를 설명하는 주요한 변수는 외국인지분율과 기업규모로 판명되었다. 둘째, 지분율에 따른 회계지표의 차이분석결과, 대주주지분율이 높은 집단이 낮은 집단에 비해 영업현금흐름에서 양(+)의 차이를 보였다.

• 대기
• /
• 제20권4호
• /
• pp.483-494
• /
• 2010

The vertical profiles of the extinction coefficient, the backscatter coefficient, and the lidar ratio (i.e., extinction-to-backscattering ratio) for Asian dust and pollution aerosols are determined from Raman (inelastic) and elastic backscatter signals. The values of lidar ratios during two polluted days is found between 52 and 82 sr (July 22, 2009) and 40~60 sr (July 31, 2009) at 52 nm, with relatively low value of particle depolarization ratio (<5%) and high value of sun photometer-derived Angstrom exponent (> 1.2). However, lidar ratios between 25 and 40 sr are found during two Asian dust periods (October 20, 2009 and March 15, 2010), with 10~20% of particle depolarization ratio and the relatively low value of sun photometer-derived Angstrom exponent (< 0.39). The lidar ratio, particle depolarization ratio and color ratio are useful optical parameter to distinguish non-spherical coarse dust and spherical fine pollution aerosols. The comparison of aerosol extinction profiles determined from inelastic-backscatter signals by the Raman method and from elastic-backscatter signals by using the Fernald method with constant value of lidar ratio (50 sr) have shown that reliable aerosol extinction coefficients cannot be determined from elastic-backscatter signals alone, because the lidar ratio varies with aerosol types. A combined Raman and elastic backscatter lidar system can provide reliable information about the aerosol extinction profile and the aerosol lidar ratio.

• The International Journal of Costume Culture
• /
• 제8권1호
• /
• pp.23-31
• /
• 2005

Mechanical properties and hand evaluation of wool/acrylic(W/A) blend knits were conducted before and after repeated washing to get the optimum W/A blending ratio, which could help achieve the optimum mechanical and hand properties of the knits. The five test fabrics using the yarns with different W/A blending ratios($\%$), 100/0, 70/30, 50/50, 30/70, 0/100, were knitted. The fabrics were washed by a rotating drum type washing machine. Then, objective mechanical and hand properties were evaluated by KES-FB, Kawabata evalution system for fabric. The results are as follows: there was no change in the hand value of the knitted fabric with the W/A-blended yarn caused by the change in the blending ratio before washing. After washing, however, the increase of acrylic's blending rate caused the bending property to decrease proportionally, while the friction coefficient of the surface property increased. Furthermore, the study showed that W/A 50/50 possesses the most superior tensile property and shearing property, which could attain the optimum blending ratio. Similar results in hand value were derived in all the samples. After washing, however, the increase in acrylic's blending rate caused a proportional decrease in KOSHI and an increase in FUKURAMI. In addition, W/A 50/50 gained the biggest NUMERI value, again corresponding to the optimum blending ratio. Similar results in total hand value were derived in all the samples before washing. After washing, though, all the total hand values decreased, and, as the wool fabric's blending rate increased, the total hand values proportionally decreased further.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.105-112
• /
• 2008

Disinfection is a basic and effective microorganism inactivation method and historically contributed a decrease in waterborne diseases. To guarantee the disinfection ability, improving T in CT value is important. Many indexes are used to estimate the hydraulic efficiency, however, these are black-box analysis. Therefore it is need to develope new estimation method. In this study, internal short-circuiting estimation method (ISEM) is developed using CFD and we inquire into the factor which causes increase of $T_{10}/T$ value as LW ratio increases. And the effect of shape on the relation of LW ratio and $T_{10}/T$ is analyzed. As LW ratio increases, internal short-circuiting index (ISI) of influent and effluent zone is rapidly reduced and recirculation and dead zone are reduced in channel zone. Therefore, as the $T_{10}/T$ value converges maximum value, ISI curve is changed from "V" shape to "U" shape and hydraulic efficiency is improved especially in downstream portion of clearwell. The less the shape ratio(width/length of clearwell) is the less the $T_{10}/T$ value is at a same LW ratio because the portion of turning zone increases as shape ration decreases, therefore more boundary separation is generated.