• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권4호
• /
• pp.459-479
• /
• 2015

Two-dimensional steady laminar natural convection around a heat conducting and generating solid body inside a square enclosure with different thermal boundaries is performed. The mathematical model is governed by the coupled equation of mass, momentum and energy. These equations are discretized by finite volume method with power-law scheme and solved numerically by SIMPLE algorithm with under-relaxation technique. Effect of Rayleigh number, temperature difference ratio of solid-fluid, aspect ratio of solid-enclosure and the thermal conductivity ratio of solid-fluid are investigated numerically for Pr = 0.7. The flow and heat transfer aspects are demonstrated in the form of streamlines and isotherms respectively.

• Structural Engineering and Mechanics
• /
• 제60권2호
• /
• pp.313-335
• /
• 2016

In this article, a four-variable refined plate theory is presented for buckling analysis of functionally graded plates subjected to uniform, linear and non-linear temperature rises across the thickness direction. The theory accounts for parabolic distribution of the transverse shear strains, and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factor. Young's modulus and Poisson ratio of the FGM plates are assumed to remain constant throughout the entire plate. However, the coefficient of thermal expansion of the FGM plate varies according to a power law form through the thickness coordinate. Equilibrium and stability equations are derived based on the present theory. The influences of many plate parameters on buckling temperature difference such ratio of thermal expansion, aspect ratio, side-to-thickness ratio and gradient index will be investigated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.84-87
• /
• 2009

This paper describes a novel method for fabricating large area metallic stamp with high aspect ratio micro intaglio features. Micro machined brass master with pillar and larger width groove patterns were electroformed to form inverse structures on the large area metallic stamp. This enabled large area metallic stamp with fine micro high aspect ratio micro intaglio features which were small width groove patterns and quadrilateral hole patterns that cannot be fabricated by direct micro machining process. Fabricated large area metallic stamp with high aspect ratio micro intaglio features was measured and analyzed.

• Computers and Concrete
• /
• 제32권3호
• /
• pp.303-311
• /
• 2023

An analysis of the Poisson's ratios influence of single walled carbon nanotubes (SWCNTs) based on Sander's shell theory is carried out. The effect of Poisson's ratio, boundary conditions and different armchairs SWCNTs is discussed and studied. The Galerkin's method is applied to get the eigen values in matrix form. The obtained results shows that, the decrease in ratios of Poisson, the frequency increases. Poisson's ratio directly measures the deformation in the material. A high Poisson's ratio denotes that the material exhibits large elastic deformation. Due to these deformation frequencies of carbon nanotubes increases. The frequency value increases with the increase of indices of single walled carbon nanotubes. The prescribe boundary conditions used are simply supported and clamped simply supported. The Timoshenko beam model is used to compare the results. The present method should serve as bench mark results for agreeing the results of other models, with slightly different value of the natural frequencies.

• 생태와환경
• /
• 제41권2호
• /
• pp.166-173
• /
• 2008

오염물질을 제거하기 위한 방법 중 하나인 석회 처리를 통하여 청초호 표층 퇴적물에 함유된 중금속의 존재 형태 변화와 환경변화시 수층으로의 용출가능성을 알아보았다. 연속추출 방법을 사용하여 중금속의 화학적 형태를 분석하였고 수층으로의 용출 가능성은 흡착된 형태와 공침된 형태의 합으로 하였다. 석회 처리 전의 청초호 퇴적물에 함유된 Cd과 Cu 및 Zn의 존재형태는 호수 바닥과 같은 혐기성 상태에서 안정된 산화성 형태가 많았으나 석회 처리 시료에서는 이 부분의 비율이 줄어든 반면 용출되기 쉬운 부분인 흡착된 형태와 공침된 형태의 비율이 증가하였다. 이는 석회 첨가로 인한 공극수의 pH상승과 대기중에 노출로 인한 산화에 의한 것으로 판단된다. 수층으로 이동 가능한 부분의 비율은 Cd의 경우 석회함량 15%, Pb은 10%, Cu와 Zn은 20%에서 높게 나타나 중금속으로 오염된 퇴적물의 석회 처리는 퇴적물에 함유된 중금속의 용출을 증가시킬 가능성이 있는 것으로 사료된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.324-337
• /
• 2010

For the development of load and resistance factor design, reliability analysis is required to calibrate resistance factors in the framework of reliability theory. The distribution of measured-to-predicted pile resistance ratio was constructed based on only the results of load tests conducted to failure for the assessment of uncertainty regarding pile resistance and used in the conventional reliability analysis. In other words, successful pile load test (piles resisted twice their design loads without failure) results were discarded, and therefore, were not reflected in the reliability analysis. In this paper, a new systematic method based on Bayesian theory is used to update reliability index of driven steel pile piles by adding more pile load test results, even not conducted to failure, into the prior distribution of pile resistance ratio. Fifty seven static pile load tests performed to failure in Korea were compiled for the construction of prior distribution of pile resistance ratio. Reliability analyses were performed using the updated distribution of pile resistance ratio and the total load distribution using First-order Reliability Method (FORM). The challenge of this study is that the distribution updates of pile resistance ratio are possible using the load test results even not conducted to failure, and that Bayesian update are most effective when limited data are available for reliability analysis or resistance factors calibration.

• 한국통신학회논문지
• /
• 제37A권10호
• /
• pp.865-875
• /
• 2012

본 논문은 포트 당 일정 파워 제약을 전제한 상황에서, 다중 안테나를 장착한 분산 안테나 (distributed antenna: DA) 포트를 갖는 분산 안테나 시스템 (distributed antenna system: DAS)의 안테나 위치 설계 방법을 분석한다. 안테나 위치의 설계를 위해 복잡하게 셀 당 평균 ergodic sum rate를 최대화하는 대신, 본 논문에서는 단일 셀 상황에서는 signal-to-noise ratio (SNR) 기댓값의 lower bound에, 그리고 이중 셀 상황에서는 signal-to-leakage ratio (SLR) 기댓값의 lower bound에 각각 초점을 맞춘다. 단일 셀 상황의 경우, 기존의 반복적 알고리즘에 비해 SNR criterion의 최적화 문제는 닫힌 형태 (closed-form)의 솔루션을 제공한다. 또한, 이중 셀 상황에선 gradient ascent 방법을 이용한 알고리즘을 제안하여 SLR criterion의 최적화 솔루션을 도출한다.

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.75-82
• /
• 2018

본 논문에서는 분산 안테나 시스템의 하향링크 다중 사용자 MIMO를 위한 프리코더 설계에 대해서 고려한다. 분산 안테나 시스템에서 RRH (Remote Radio Head)는 셀 영역 내에서 지리적으로 서로 다른 위치에 배치되게 되는데, RRH에서 적용하기 위한 세 가지 종류의 프리코더 설계 방법을 제안한다. 모든 RRH들의 전송 전력 합, 또는 각 RRH의 전송 전력에 대한 제약 조건 하에서, 개별 SLNR 또는, 결합 SLNR (Signal-to-Leakage plus Noise Ratio) 비용함수를 최대화시키도록 프리코더를 설계한다. 그리고, 각각의 최적화 문제에 대한 분석적 이론해를 제시한다. 컴퓨터 모의실험을 통하여, 결합 SLNR 기반의 프리코더 설계 방법이 개별 SLNR 기반의 프리코더 설계 방식보다 더 높은 SINR (Signal-to-Interference plus Noise Ratio) 성능과 더 낮은 BER (Bit Error Rate) 성능을 갖는다는 것을 보인다. 또한, 모든 RRH들의 전력 합에 대한 제약 조건을 갖는 프리코더 설계 방법이 각 RRH 전송 전력 제약 조건을 갖는 방식보다 더 좋은 성능을 갖는다는 것을 보인다.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.34-37
• /
• 2007

The safety of ships is one of the most important concerns in terms of the environment and human life. A ship in bad condition is likely to be subject to accidents, such as collision and grounding. When a ship has minor collision damages in the form of circle or ellipse, its ultimate strength will be reduced. It is important to evaluate the reduction ratio of a ship's ultimate strength that results from damages. The strength reduction of a plate with a cutout in the form of hole has been treated by many researchers. A closed-form formula for the reduction of ultimate strength of a plate, considering the effect of several forms of cutout, has been suggested. However, the structure of ships is composed of plates and stiffeners so-called stiffened plates and it is likely that plates and stiffeners will be damaged together in collisions. This paper investigates the effect of minor collision damages on the ultimate strength of a stiffened plate by using numerical analysis. For this study, the deformed shape of minor collision damages on a stiffened plate was made by using a contact algorithm and was used as the initial shape for ultimate stress analysis. Then, a series of nonlinear FE analyses was conducted to investigate the reduction effects on the ultimate strength of the stiffened plate. The boundary conditions were simply supported at all boundaries, and the tripping of stiffener was neglected. The results are presented in the form of reduction ratio between the ultimate strength of an original, intact stiffened plate and that of a damaged stiffened plate.

• 한국응용곤충학회지
• /
• 제16권2호
• /
• pp.105-113
• /
• 1977

한국산 불개미의 다형현상에 있어서 일개미의 몸의 크기와 임무수행과의 관계, 유시웅의의 시맥상의 변이, 성비 및 소의 크기에 따르는 일개미번데기의 형별발생과 일개미집단의 형별구성등에 관하여 조사한 결과를 요약하면 다음과 같다. 1. 일개미는 3형으로 분화되어 있으며, 소형은 주로 소의 내부에 동료집단의 보호와 외부에서 진딧물에 방문하는 임무를, 그리고 대형과 중간형은 주로 외부에서 식이운반, 조소 및 동료집단의 보호임무를 수행한다. 그러나 소형이 진딧물에 방문하는 임무는 반드시 고정되어 있는 것이 아니고 계절에 따라 다소 변동이 있는 것 같다.