• Textile Coloration and Finishing
• /
• v.4 no.3
• /
• pp.122-130
• /
• 1992

To improve the physical properties and the dyeing properties of silk, the silk fabric was treated with urea resin and reactive dyeing. The effects of urea resin concentration, pH of padding bath and curing condition were investigated in order to find optimum condition and the following results are obtained The optimum condition for the crease recovery of silk fabric was urea resin concentration of 80 g/ι, pH of 7, the curings temperature of about 135$^{\circ}C$, and the curing time of 3 minutes. The crease recovery and the thermal insulation ratio of silk fabric were increased by the above treatment. K/S increased as the adding amount of Na$_2$SO$_4$ increased, K/S, however was not affected by the adding amount of Na$_2$CO$_3$. Co1or fastness of the dyed fabrics treated with urea resin were improved slightly compared with untreated ones.

• Textile Coloration and Finishing
• /
• v.11 no.3
• /
• pp.1-8
• /
• 1999

Polyester ultrarmcrofiber(UMF, fiber fineness : 0.05d) and the other three kinds of polyester fibers(0.52, 1.04 and 2.08d) were dyed with two disperse dyes, C.1. Disperse Red 60 and Blue 56. Dyeing rates and absorption isotherms of these dyes have been measured at 100, 115 and $130^\circ{C}$ in water system. The dye bath was maintained at pH 5.0 with acetic acid(0.1mo1/1) /sodium acetate(0.1mo1/1) buffers and a liquor ratio of 1000：1. The absorption isotherms from two disperse dyes are nearly linear up to the saturation values, which increase with the temperature of dyeing. Dye uptake decreased with the fiber fineness in lower temperature $100^\circ{C})$, whereas increased in higher temperature$(130^\circ{C})$. A comparatively greater quantity of dye is necessary to dye ultrarmcrofiber fabrics than conventional fabrics. Disperse Blue 56 having a good build-up property is agreed to Fothergill's equation, which is inversely varied with the fiber fineness by the quantity of dye necessary to obtain a given shade.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.8
• /
• pp.875-884
• /
• 2012

Many Koreans have recently bleached their black hair to blond or a light color due to the influence of their favorite Korean idols. Bleaching effects were studied under various bleaching conditions, such as the concentration of oxidants, the ratio between bleach accelerant and oxidant, and treatment temperature and time. The degree of damage of bleached hair with the same color difference (${\Delta}E$) intervals was observed in SEM images, the retention of breaking load and the change of color after dyeing. The ratio between bleach accelerant and oxidant of 1:2.5 was an effective condition. $L^*$ values of the bleached hair treated with 9% oxidant increased to 90 min. At a treatment temperature of $30^{\circ}C$, $a^*$ values were maximum at 30 min and then decreased as time further increased; however, $b^*$ values of the bleached hair increased as the treatment time increased. At $45^{\circ}C$, both of $a^*$ and $b^*$ values showed a maximum at a specific time. Bleaching efficiency was influenced most by temperature, followed in order by time, and oxidant concentration. As the treatment time increased, $L^*$ values greatly increased with twice treatment; however, $a^*$ and $b^*$ values decreased. Bleached hair, which had a color difference of higher than 30, showed the scales were completely removed and the retention of the breaking load greatly decreased. Highly bleached hair showed a great decrease in $L^*$ values by dyeing; however, dyeing with bright colors was more indicative to the effect of bleaching.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.35-41
• /
• 2008

This study investigated the dyeing properties of silk fabrics with Annatto. The dye stuff was extracted by distilled water at $60^{\circ}C$, 10minutes, 1:100 of bath ratio. Dyeability(K/S) and color fastness of silk fabrics were tested under conditions of various concentrations, time, temperature, repeat-numbers of dyeing, pH, mordants variables and methods of mordanting. The highest absorbance was found in methanol extract of Annatto. The optimum dyeing concentration, time and temperature of silk fabrics with Annatto were 25%(o.w.f.), 60min and $60^{\circ}C$ respectively. The K/S value showed higher in post-mordanting than in pre-mordanting, and especially post-Fe mordant showed highest K/S value. In the case of colorfastness, Cu-mordanted fabrics were good washing fastness. Dry cleaning fastness appeared 4-5 grades and light fastness showed lowest grade.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.1
• /
• pp.124-132
• /
• 2002

Dyeing properties of silk fabric on gromwell roof colorants were studied for the effect of dyeing conditions, such as methanol ratio, colorants concentration, pH, temperature and time etc. on the dye uptake and effect of mordants and mordanting methods on color change and dye uptake. And various colorfastnesses of dyed fabrics were evaluated far practical use. Gromwell colorants showed high affinity to silk and its isotherm adsorption curve was Freundlich type close to Nernst type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of cromwell colorants to silk fabric. Post-mordanting method gave higher K/S value than other methods, but it was not significantly different color values from unmordanted one. Gromwell colorants produced mainly R and RP color depending on mordants and mordanting method. Dyed fabrics showed high colorfastness irrespective of mordanting treatment. Light colorfastness was increased for repeatedly dyed and Fe mordanted dyed fabrics.

• Textile Coloration and Finishing
• /
• v.19 no.6
• /
• pp.28-34
• /
• 2007

The optical and physical properties of alkyl-substituted anthraquinoid dyes were investigated in terms of dyeing of pure polypropylene fiber. The length of alkyl substituents of the dyes did not affect the molar extinction coefficient and maximum absorption wavelength of them. The use of a double-tailed cationic surfactant, didodecyldimethylammonium bromide(DDDMAB), could make the hydrophobic dyes dispersed in water effectively. As the amount of DDDMAB increased, the average particle size of dye dispersion decreased. Maximum color strength of the fabrics was shown in the case that 1.5 molar ratio of DDDMAB was used. As for the fastness properties, commercially acceptable result was obtained in general.

• Textile Coloration and Finishing
• /
• v.12 no.6
• /
• pp.344-352
• /
• 2000

Two kinds of nylon 6 fabrics with different fiber denier, such as ultramicro fiber(UMF) nonwoven fabric(monodenier 0.05d) and regular fabric(monodenier 2.92d) are dyed with C.I. Acid Red 18(leveling type) and C.I. Acid Blue 113(milling type). Dyeing rates and adsorption isotherms are measured at $60^\circ{C}$, pH 5.0 and at liquor ratio of 1 : 250. To investigate the effect of fixing agents (Matexil FA-SNX, Monorex-RD and Tinofix-ECO) on UMF nylon 6 nonwoven fabric, dyeing is carried out at 3~10% owf with 1 : 2 metal-complex acid dyes, such as Kayalax Navy R(unsulphonated type), Lanasyn Blue S-BL(monosulphonated type) and Kayakalan Black BGL(disulphonated type). The dyeing rate of UMF nylon 6 is faster than that of regular nylon 6. From the results of absorption isotherms, the regular nylon 6 has higher saturation value of Acid Red 18 compared with UMF nylon 6, whereas UMF nylon 6 has higher saturation value of the acid Blue 113. From the absorption isotherms of both acid dyes, the regular nylon 6 has higher saturation value of Acid Red 18, whereas UMF nylon 6 has higher saturation value of the acid Blue 113. The wash fastnesses of UMF nylon 6 increases in the order of metal-complek dye containing nonsulphonated group > monosulphonated group>disulphonated group. Aftertreatment of UMF nylon 6 dyed with unsulponated and monosulphonated dyes improves wash fastness upto grade 1.5, where as that of UMF nylon 6 dyes with disulphonated dye does not improve wash fastness.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.35-35
• /
• 2011

Phase change material(PCM) has thermal energy storage and been attracted attention. Latent heat of the organic PCM can keep maintaining temperature when the change of outside energy conditions influence to PCM. Thus, many researchers have interested to thermal energy storage ability and investigated to applications such as thermal storage of solar energy, bioclimatic building, icebank, medical application, clothing industry and so on. Among the many applications, investigation of the PCM in clothing industry is also important because the people has interest functional factor called health-care in the clothing. In addition, PCM can give them mild environment condition such suitable temperature control or humidity. To fabrics, the PCM has various methods such as microcapsule, padding and modified cross-section formation(Sheath/core). Sheath core PCM fabric has a better benefit of durability than other method. However, PCM sheath/core spinning is difficult. In addition, dyeing property is important to use clothing industry due to visual images. In this study, we investigated dyeing properties of Nylon/PCM sheath/core fabrics. Especially, we observed the relation between dyeing property and PCM including ratio. Various temperature and pH conditions were also studied to optimize dyeing properties as acid dye.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.99-104
• /
• 2005

This study is as a part of the new disposal and recycling plans of heat-resource waste of Daegu dyeing, industrial center we tried to examine applicable possibility of crushed thing(waste aggregate) as aggregates for mortar and concrete. To examine applicable possibility of waste aggregate as a lightweight-aggregate for concrete and mortar, we carried this study by mainly property examination of concrete according to replacement ratio of waste aggregate. We carried slump, unit weight, compressive strength and bending strength test according to replacement ratio of waste aggregate. As the result of that, if we use waste aggregate, lightweight of concrete and mortar will be possible. Specially it shows a strength improvement effect of cement hardening according to using this so it is judged that applicable possibility as aggregate for concrete and mortar is very excellent.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.133-144
• /
• 1988

Silk fabrics were degummed and dyed in one bath under the condition of high temperature and high pressure and the results obtained were summerized as follows. 1. The degumming ratio is nearly the same as that of two bath method under the normal condition and the optimal condition is for 30 minutes at $120^{\circ}C$. 2. The dyeing absorption ratio is a little lower than that of two bath method. 3. The tensile strength and elongation are hardly shown the difference between two methods. 4. The fastness of the dyed fabric of one bath method is a little better than that of two bath method. (light, washing, rubbing) 5. The stiffness of the silk fabric treated by one bath method is a little harshier compare to that of two bath method.