• Asian-Australasian Journal of Animal Sciences
• /
• 제12권2호
• /
• pp.165-168
• /
• 1999

To determine the effects of genetic and environmental influences on cell mediated immune (CMI) responses in broiler rabbits, contact sensitivity to 2,4-Dinitrochlorobenzene (DNCB) was assessed in three temperate broiler breeds of rabbits, namely Soviet Chinchilla, New Zealand White and Grey Giant. The feasibility of using the contact sensitivity to DNCB as a marker trait in selection for disease resistance was examined. There were highly significant differences between breeds (p<0.01) in initial skin thickness and contact sensitivities to DNCB at 24, 48 and 72 hours. Initial skin thickness was greatest in the Soviet Chinchilla breed (mean 2.2484 mm), and was significantly greater (p<0.01) in males (2.4963 mm) than in females (1.7846 mm) (p<0.01). Highest contact sensitivity to DNCB was in the New Zealand White breed with mean increase in skin thickness of 1.1884, 0.9072 and 0.5879 mm at 24, 48 and 72 hours post challenge respectively. Delayed type hypersensitivity (DTH) reaction to DNCB at 24 hours post challenge had a highly significant association (p<0.01) with the incidence of body mange in rabbits. The results indicated a lowered contact sensitivity to DNCB at 24 hours post challenge was associated significantly (p<0.01) with an increase in incidence and severity of body mange, suggesting its potential value as a marker. The correlation s among contact sensitivities at 24, 48 and 72 hours were positive and highly significant (p<0.01); correlations between initial skin thickness and contact sensitivities were negative and highly significant (p<0.01). Another notable significant correlation was between body weight and delayed type hypersensitivity at 24 hours indicating that an enhanced CMI might be associated with better growth rate and general wellbeing.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 춘계학술발표회
• /
• pp.161-165
• /
• 2005

Recently, it is on the increase interest for Al alloy with new material for ship application to substitute for FRP ship. The reason is thatAl alloy ship has beneficial characteristics such as high sea speed, increase of loadage and easy to recycle compared with FRP ship. In this paper, mechanical and electrochemical properties are investigated by slow strain rate test experiment in various applied potential condition. These results will provide as reference data to design ship by deciding optimum protection potential regard to hydrogen embrittlement and stress corrosion cracking. In general, Al and Al alloys are not corroded with forming film which has the corrosion resistance property in neutral solution. However, it was observed that formation and destruction of passive film by $Cl^-$ ion in sea water environment. At comparison of current density after 1200 sec in potentiostatic experiment, the current density in the potential range of -0.68 $\~$-1.5 V is shown low value. The low current density means protection potential range. Elongation in applied potential of 0 V was high. However, the corrosion protection application in this condition is impossible potential because the toughness is low value by decreasing strength by active dissolution reaction at parallel part of specimen. The film composed with $CaCO_3$ and $Mg(OH)_2$ has a corrosion resistance property. However, the uniform electrodeposition coating at below -1.6 V potential is not formed since the time to form the uniform electrodeposition coating is short. Therefore, it is concluded that mechanical property is poor because effect by hydrogen gas generation is larger than that of electrodeposition coating. It is concluded that the optimum protection potential range from comparison of_maxim urn tensile strength, elongation and time to fracture is -1.3$\~$0.7 V (SSCE).

• 한국육종학회지
• /
• 제41권2호
• /
• pp.92-100
• /
• 2009

To investigate the mutagenecity of sodium azide (SA) and to select mutants having various agronomic characteristics in rice (Oryza sativa L. ssp. japonica), dry seeds of rice variety 'Suweon 472' were treated with 0, 0.5, 1.0, 2.0, and 4.0 mM SA solutions prepared in 0.1 M phosphate buffer (pH 3.0). Germination rate, seedling height and sterility were investigated in $M_1$ generation and chlorophyll mutations were observed in $M_3$ generation. Germination rate and seedling height decreased as the increase of SA concentration in $M_1$ generation, the maximum seed sterility (40.8%) was found at 4.0 mM SA concentration. Chlorophyll mutants were occurred in $M_3$ generation and the frequency calculated on a line basis was 13.5% at the same treatment. Many kinds of mutations for morphological and agronomic characters were observed and mutations with short culm and glabrous leaf were frequently found in $M_3$ generation. Interestingly, five mutant lines resistant to blast or bacterial blight (BB) were selected and evaluated with several isolates in $M_3$ generation although Suweon 472 has been known to be susceptible to blast and BB. These mutants showed all resistance to seven isolates of blast and a total of 76 lines among 2,567 lines evaluated showed resistant to race K1 of bacterial blight. Two mutant lines (440172 and 41272) showed different reaction to BB isolates from the other resistant mutants. A few kinds of endosperm mutants were also identified and most of them were waxy mutants.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.521-528
• /
• 2008

중공사막 접촉기에 적절한 PVDF 중공사막을 상전이 공정에 의하여 제조하였으며, SEM 과 기체투과도에 의하여 그 특성을 분석하였다. 벤치규모 중공사막 접촉기에서 $SO_2$ 제거를 위한 흡수제는 수산화나트륨 수용액을 사용하였다. 기체는 shell side, 액체는 lumen side로 흐르는 counter-current로 실험하였으며, 흡수제의 농도, 기체의 유속, 액가스비, 유입 $SO_2$ 농도에 따른 영향을 알아보았으며, 수학적 모델링에 의해 막 물질전달계수($k_m$)를 측정하였다. 흡수제의 농도와 액기비가 증가함에 따라 기-액 계면에서 충분한 알칼리도가 제공되므로, 액체막 저항이 감소하며, 총괄물질전달 용량계수는 증가하였다. 기체유속이 증가함에 따라 기체막저항은 감소하게 되므로 총괄물질전달 용량계수는 증가하였다.

• Corrosion Science and Technology
• /
• 제22권2호
• /
• pp.123-130
• /
• 2023

This study aimed to evaluate corrosion resistance of steel coated with GI and Zn-Al-Mg alloy using cyclic corrosion test (CCT) with electrochemical polarization and impedance measurements. Results showed that the Zn-Al-Mg alloy coated steel had a much higher corrosion rate than GI coated steel in early stages of corrosion. With prolonged immersion, however, the corrosion rate of the Zn-Al-Mg alloy coated steel greatly decreased, mainly owing to a significant decrease in the cathodic reduction reaction and an increase in polarization resistance at the surface. This was closely associated with the formation of protective corrosion products including Zn₅(OH)₈Cl₂·H₂O and Zn₆Al₂(OH)₁₆CO₃. Moreover, when the steel substrate was locally exposed due to mechanical damage, the kinetics of anodic dissolution from the coating layer and the formation of protective corrosion products on the surface of the Zn-Al-Mg alloy coated steel became much faster compared to the case of GI coated steel. This could provide a longer-lasting corrosion inhibition function for Zn-Al-Mg alloy coated steel used in plant farms.

• Advances in materials Research
• /
• 제13권3호
• /
• pp.183-194
• /
• 2024

D3 tools steel and 440C stainless steel (SS) are normally being employed for application such as knife blade and cutting tools. These steels are iron alloys which have high carbon and high chromium content. In this study, lab work focused on the microstructural and corrosion behavior of D3 tools steel and 440C SS after went through heat treatment processes. Heat treatments for both steels were started with normalizing at 1020 ℃, continue with hardening at 1000 ℃followed by oil quenching. Cryogenic treatment was carried out in liquid nitrogen for 24 hours. The addition of cryogenic heat treatment is believed to increase the hardness and corrosion resistance for steels. Both samples were then tempered at two different tempering temperatures, 160 ℃ and 426 ℃. For corrosion test, the samples were immersed in NaCl solution for 30 days to study the corrosion behavior of D3 tool steel and 440C SS after heat treatment. The mechanical properties of these steels have been investigated using Rockwell hardness machine before heat treatment, after heat treatment (before corrosion) and after corrosion test. Microstructure observation of samples was carried out by scanning electron microscopy. The corrosion rate of these steels was calculated after the corrosion test completed. From the results, the highest hardness is observed for D3 tool steel which tempered at 160 ℃(54.1 HRC). In terms of microstructural analysis, primary carbide and pearlite in the as-received samples transform to tempered martensite and cementite after heat treatment process. From this research, for corrosion test, heat treated 440C SS sample tempered with 426 ℃possessed the excellent corrosion resistance with corrosion rate 0.2808 mm/year.

• 한국작물학회지
• /
• 제30권4호
• /
• pp.347-351
• /
• 1985

품종간 엽중수분변화에 대한 광합성과 호흡에 미치는 영향을 밝히기 위하여 온실에서 자란 잎담배 5품종의 엽중수분함량을 변화시켜서 광일광합성속도, 호흡속도, 기공저항 및 엽육저항을 각각 조사한 결과를 요약하면 다음과 같다. 1. 품종간 광합성속도는 N. longiflora가 20.7mg $CO_2$/dm$^2$/hr로 제일 컸고 Burley종이 제일 적었다. 2. 광합성속도와 단위엽면적당 건물중과는 정의 상관을 보였다. 3. 안동엽은 WSD 53%에서 광합성속도가 50%정도 감소되었으나 Burley 21은 외관상으로 위조상태 이전인 WSD 43%에서 광합성능력을 상실하여 재배품종은 N. longiflora와 안동엽보다 수분결핍에 의해 광합성 작용이 크게 억제되었다. 4. 품종간 호흡속도의 변화는 수분결핍 초기에 약간 증가하다가 광합성속도와 같은 경향으로 감소하였다. 5. 수분결핍에 따라 기공저항과 엽육저항은 증가되었으며 수분결핍에 의한 광합성속도의 감소는 주로 기공이 닫혀지기 때문으로 본다.

• Tribology and Lubricants
• /
• 제33권2호
• /
• pp.71-78
• /
• 2017

The drag torque in the wet clutch system of a dual clutch transmission system is investigated because it is relatively high, up to 10 of the total output torque of the engine, even when the clutch is in the disengagement state with zero torque transfer. Drag torque results from the shear resistance of the DCTF between the friction pad and separator plate. To reduce the drag torque for ensuring fuel economy, the groove pattern of the wet clutch friction pad is designed to have a high flow rate through the pattern groove. In this study, four types of groove patterns on the friction pad are designed. The volume fraction of the DCTF (VOF) and hydrodynamic pressure developments in the gap between the friction pad and separator plate are computed to correlate with the computation of the drag torque. From the computational results, it is found that a high VOF and hydrodynamics increase the drag torque resulting from the shear resistance of the DCTF. Therefore, a patterned groove design should be used for increasing the flow rate to have more air parts in the gap to reduce the drag torque. In this study, ANSYS FLUENT is used to solve the flow analysis.

• 한국수산과학회지
• /
• 제45권6호
• /
• pp.606-611
• /
• 2012

This study examined the effects of dietary glycoprotein extracted from Porphyra yezoensi on growth performance and resistance against the pathogenic bacteria Edwardsiella tarda in olive flounder. A porphyra-originated glycoprotein (P) was extracted using sequential processes of water and ethanol treatment. P extracts were added to a fish-meal-based diet at concentrations of 0.0, 0.5, and 1.0% (designated as Con, $P_{0.5}$, and $P_{1.0}$, respectively). Fish were fed one of the three experimental diets for 10 weeks. All fish groups exhibited over 96.7% survival during the experimental period. Results indicated that the fish fed diets containing P showed an increase in growth performance, including enhanced weight gain, specific growth rate, and feed efficiency. An increase in insulin-like growth factor (IGF-1) was observed in the fish fed the $P_{1.0}$ diet, as compared to those fed Con. At the end of the 10-week feeding trial, all fish were infected with E. tarda, and accumulated mortality was monitored for 8 days. Fish fed the Con diet exhibited increasing mortality from day 3 to the end of the challenge test, whereas the mortality of P-fed fish ceased at day 5. We suggest that supplementation with P-originated glycoprotein in aquafeed may increase growth performance and resistance against pathogenic bacteria in olive flounder juveniles.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.115-122
• /
• 2018

"일라이트와 이산화티탄을 활용한 콘크리트 블록의 수질환경개선을 위한 실험연구"를 진행하기 위해 모르타르 예비실험, 수질정화특성, 방오실험, 어독성 실험 및 실 콘크리트 블록 제조 후 관련 KS에 준한 실험을 진행한 결과 다음과 같은 결론을 얻었다. KS에 준한 콘크리트 블록의 성능평가 결과 전 조건에서 시험기준치의 압축강도를 상회하는 것으로 측정되었으며, 다공질구조의 일라이트 치환에 따른 흡수율 증가가 문제점으로 예상되었으나, 이산화티탄과 사전 혼합하여 치환함으로써 일라이트의 대형 공극내 이산화티탄이 정착함에 따라 흡수율 또한 문제가 없는 것으로 관찰되었다.