• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1021-1028
• /
• 2013

The frequency of a power system should be kept within limits to produce high-quality electricity. For a power system with a high penetration of wind generators (WGs), difficulties might arise in maintaining the frequency, because modern variable speed WGs operate based on the maximum power point tracking control scheme. On the other hand, the wind speed that arrives at a downstream WG is decreased after having passed one WG due to the wake effect. The rotor speed of each WG may be different from others. This paper proposes an algorithm for assigning the droop of each WG in a wind power plant (WPP) based on the rotor speed for the virtual inertial control considering the wake effect. It assumes that each WG in the WPP has two auxiliary loops for the virtual inertial control, i.e. the frequency deviation loop and the rate of change of frequency (ROCOF) loop. To release more kinetic energy, the proposed algorithm assigns the droop of each WG, which is the gain of the frequency deviation loop, depending on the rotor speed of each WG, while the gains for the ROCOF loop of all WGs are set to be equal. The performance of the algorithm is investigated for a model system with five synchronous generators and a WPP, which consists of 15 doubly-fed induction generators, by varying the wind direction as well as the wind speed. The results clearly indicate that the algorithm successfully reduces the frequency nadir as a WG with high wind speed releases more kinetic energy for the virtual inertial control. The algorithm might help maximize the contribution of the WPP to the frequency support.

• Journal of Veterinary Clinics
• /
• v.31 no.1
• /
• pp.11-14
• /
• 2014

This is a retrospective study describing postoperative complication encountered with surgery performed in dogs with medial patellar luxation (MPL). During the 4-year period, 77 operations had been performed in 66 dogs for correction of MPL. The patients were surgically treated with medial soft tissue release, lateral soft tissue tightening, trochlear block recession, and/or tibial tuberosity transposition (TTT). Their prognoses were periodically evaluated for 6 months postoperatively. The failure rate was higher in revision surgery than in the first surgery, and the most common postoperative complication was migration of the tibial tuberosity fragment. The causes for the migration of the tibial tuberosity fragment were identified as the downward insertion of a surgical pin, the eccentric position of an inserted pin in the tibial tuberosity fragment, and blunt angle formation of the tibial tuberosity. It is suggested that the appropriate methods for TTT could minimize complications and lead to a good prognosis.

• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2003

In this work, the effect of PMR-15 content on the variation of surface free energy of the DGEBA/PMR-15 blend system was investigated in terms of contact angles and mechanical interfacial tests. Based on FT-IR result of the blend system. C=O (1,772, $1,778cm^{-1}$) and C-N ($1,372cm^{-1}$) peaks appeared with imidization of PMR-15 and -OH ($3,500cm^{-1}$) peak showed broadly at 10 phr of PMR-15 by ring-opening of epoxy. Contact angle measurements were performed by using deionized water and diiodomethane as testing liquids. As a result, the surface free energy of the blends gave a maximum value at 10 phr of PMR-15, due to the significant increasing of specific component. The mechanical interfacial properties measured from the critical stress intensity factor ($K_{IC}$) and the critical strain energy release rate ($G_{IC}$) showed a similar behavior with the results of surface energetics. This behavior was probably attributed to The improving of the interfacial adhesion between intermolecules, resulting from increasing the hydrogen bondings of the blends.

• Journal of Plant Biotechnology
• /
• v.46 no.1
• /
• pp.32-36
• /
• 2019

Calla lilies (Zantedeschia spp.) are monocotyledonous ornamental plants which belongs to the Araceae family. After the release of elite calla cultivar, an efficient propagation system is needed for commercial use. Despite the use of conventional propagation methods such as splitting of tubers and rhizomes of calla, rapid and efficient propagation system should be developed. In order to achieve this goal, stem segments contained apical meristems derived from calla lily cultivar (cv. Gag-si) were cultured on Murashige and Skoog (MS) medium supplemented with various concentrations of cytokinin and auxin. This was aimed at inducing embryogenic calluses, shoots and multiple shoots. As a result, about 25% of induction rates of yellow embryogenic calluses were observed with MS medium containing both $0.5mg{\cdot}L^{-1}\;NAA$ and $1.5mg{\cdot}L^{-1}\;BA$ as growth regulators. In the experiments involving the regeneration from embryogenic calluses through shoot formation, MS medium supplemented with $0.5mg{\cdot}L^{-1}\;IAA$ and $2.0mg{\cdot}L^{-1}\;BA$ showed the highest rates at approximately 85 ~ 90% with regard to the formation of shoots in calla. Moreover, multiple shoots needed for rapid propagation were generated when explants were cultured on MS medium supplemented with $0.5mg{\cdot}L^{-1}\;IAA$ and $2.0mg{\cdot}L^{-1}\;BA$ with 40% of formation rate. In this study, the combination of auxin and cytokinin showed positive effects on both the induction of embryogenic calluses, the formation of shoots as well as multiple shoots in calla. The regeneration system described here can contribute to the development of breeding programs of calla in the future.

• Parasites, Hosts and Diseases
• /
• v.29 no.3
• /
• pp.267-278
• /
• 1991

The natural killer (NK) cell activity of splenocytes and recycling capacity of NK cells were observed by combining the $^{51}Cr-release$ cytotoxicity assay and single cell cytotoxicity assay against YAC-1. The ICR mice were infected intranasally with Naegleria fewleri, that is a pathogenic free-living amoeba. The mice infected with $1{\times}10^5$ trophosoites showed mortality rate of 76.7% and mean survival time of 12. 9 days. The cytotoxic activity of NK cells in infected mice was significantly higher than that of non-infected mice during the period between 12 hours and day 3 after infection, and highest on day 1. The target-binding capacity of NK cells in infected mice was not different from that of non-infected ones. Maximal killing potential and maximal recycling capacity were remarkably increased in infected mice as compared with the control. The results obtained in this observation indicated that elevated NK cell activity in mice infected with N. fowieri was not due to target-binding capacity of NK cells but due to the increased activity of NK cells and increased recycling capacity of individual NK cells.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.27-37
• /
• 2022

With the recent increase in the spread of ESS (Electric Storage System), the damage to human life and property is also rapidly increasing due to continuous fires caused by ESS. In the manufacture of urethane sandwich panels used in ESS, it is necessary to improve the flame retardant performance. In this study, in order to realize the flame retardant properties of flexible polyurethane foam, the effect of the tissue density of the product due to the change of the isocyanate functional group parameter that changes the physical properties of the product on the fire performance was studied. The product was manufactured by changing the density of the urethane structure, and combustion performance tests, gas toxicity tests, and smoke density tests were performed. As a result, it was confirmed that the total amount of heat released had excellent performance when the isocyanate functional group was high, and had no correlation with the maximum heat release rate. When the value of the isocyanate functional group was 2.7 or more, the collapse of the shape could be prevented. In the gas hazard test, the performance was increased when the isocyanate functional group was relatively high, so a flame retardant for the Char system, which had a dense structure and easy to form a carbonized film, was added. confirmed to be. Therefore, as a result of this study, it is thought that it will be possible to lay the foundation for the development of a flame retardant to replace the cheap urethane sandwich panel used in the past.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.409-414
• /
• 2006

Molecular chaperones and folding enzymes in the endoplasmic reticulum (ER) associate with the newly synthesized proteins to prevent their aggregation and help them fold and assemble correctly. Chaperone function of BiP, which is a Hsp70 homologue in ER, is controlled by the N-terminal ATPase domain. The ATPase activity of the ATPase domain is affected by regulatory factors. BAP was identified as a nucleotide exchange factor of BiP (Grp78), which exchanges ADP with ATP in the ATPase domain of BiP This study presents whether BAP can influence folding of a protein, immunoglobulin heavy chain that is bound to BiP tightly. We first examined which nucleotide of ADP and ATP affects on BAP binding to BiP The data showed that endogenous BAP of HEK293 cells prefers ADP for binding to BiP in vitro, suggesting that BAP first releases ADP from the ATPase domain in order to exchange with ATP. Immunoglobulin heavy chain, an unfolded protein substrate, was released from BiP in the presence of BAP but not in the presence of ERdj3, which is another regulatory factor for BiP accelerating the rate of ATP hydrolysis of BiP The ADP-releasing function of BAP was, therefore, believed to be responsible for immunoglobulin heavy chain release from BiP. Grp170, another Hsp70 homologue in ER, did not co-precipited with BAP from $[^{35}S]$-metabolic labeled HEK293 lysate containing both overexpressed Grp170 and BAP. These data suggested that BAP has no specificity to Grp170 although the ATPase domains of Grp170 and BiP are homologous each other.

• Korean Journal of Weed Science
• /
• v.11 no.3
• /
• pp.167-173
• /
• 1991

Various formulations of oxyfluorfen were tested to evaluate effect of weed control efficacy and rice injury as affected by different degrees of water leakages. Rice injury was increased with increased water leakages. The formulations of Elvan, Coal slag and Chitosan gave slight injury to rice under all conditions included in terms of visual ratings, plant height and fresh weight production. However, weed control of most formulations was decreased and increased with increased water leakages for annual weeds and perennial weeds, respectively, Annual weeds were controlled greater than 90~ by all treatments, but perennial weed control was relatively low. Scirpus juncoides was the most tolerant annual weed to Oxyfluorfen. Elvan formulation showed somewhat decreased control of barnyardgrass with increased water leakages. The promising formulations of Oxyfluorfen were Chitosan, Coal slag, Bentonite B and Elvan (if the first releasing rate increased), which injured rice slightly and controlled annual weeds excellently regardless of degrees of water leakages.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.262-262
• /
• 2017

Brown rice contains a variety of nutritional and bio-functional components compared to milled rice. However, low consumer preference for steamed brown rice and short shelf life has been implicated as deterrents to the direct consumption of brown rice. This study was undertaken to determine the effect of degree of milling (DOM) on pasting and aging properties of brown rice cultivar. Short-grain (Japonica type) brown rice cv. Boseogchal (BSC), Baegjinju (BJJ), and Hiami (HIAM) were evaluated every month during 4 months storage. Rice cultivar were categorized into waxy (BSC), medium-waxy (BJJ), and non-waxy (HIAM) of which amylose contents were 6.81%, 10.06%, and 16.69~16.72%, respectively. Peak viscosity was the highest in BJJ followed by HIAM, and BSC, showing peak viscosity was lower at low temperature storage. At storage at room temperature from 60 to 120 days, the FFA content significantly increased in the rice samples with DOM1% followed by 3% and 5%, while not significant increase in DOM0% brown rice: at 120 days, the FFA ranged in 28.35~41.48, 111.99~130.06, 76.87~91.99, and 47.13~62.37 mg KOH/100g for DOM 0%, 1%, 3% and 5%, respectively. It indicated that the fat rancidity was the least in the order of DOM 0%, 5%, 3% and 1%. Storage at low temperature could reduce fat hydrolysis with lower FFA release, but rice grain with 1% MD also released more FFA compared to the other samples. It could be assumed that the most outer bran layer, approximately 1~3%, could provide a strong protection from fat rancidity. Pasting viscosity of rice samples also increased with increasing DOM rate. Results indicated that DOM was the most significant factor for lipid rancidity during storage, resulting in high FFA formation. It suggested that brown rice with DOM 0% and/or more than DOM 5% could provide the best shelf life.

• Journal of Korea Water Resources Association
• /
• v.34 no.5
• /
• pp.487-497
• /
• 2001

Investigated data on Lake Okjeong were used for the simulation of water quality. According to the simulation results, the effective scheme of water quality management on reservoir has been proposed. It has been recognized that the water quality of Lake Okjeong is under eutrophic and mesotrophic condition even though there are seasonal variation. The water quality of lake is mainly affected by the inflow of pollutant load from watershed. Therefore, to estimate and quantify the accurate amounts of pollutants flowing into reservoir is absolutely necessary for the effective management of water quality on Lake Okjeong. When the pollutant load measured during 7 different rainy periods in 1999 was compared with total pollutant load in 1999. TN and TP measured during 7 different rainy periods showed almost 50% of total pollutant load. In case of SS, it was 72.8%. On the other hand, the rainfall amount measured during the 7 different rainy periods was about 17.5% of total rainfall amount in 1999. Release rate of TP shows 11.92 mg/L at fish farm site and 0.2∼1.9 mg/L at monitoring station of water quality on Lake Okjeong, and which is considered to be less than that of other foreign reservoirs under the circumstances of anoxic condition. For the effective management of water quality on Lake Okjeong. WASP5 water quality simulation model has been applied and verified, and the verified model was used to propose the effective scheme of water quality management. In this case, 6 different scenarios were applied, by changing the amount of inflow of pollutant load in each subbasin. The most effective scheme has turned out that pollutant load generated from Imsil and Gwanchon subbasin should be reduced, and the best way to improve the water a quality is to reduce the pollutant load at every subbasin. According to the simulation result, wastewater treatment facility should be located at every subbasin.